Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 13 Dec 2014 00:43:41 -0500
From:      Anish Mistry <amistry@am-productions.biz>
To:        freebsd-usb@freebsd.org
Subject:   urndis and umodem device collision for ue device
Message-ID:  <1580934.Kkj0kKdA3z@bigguy.am-productions.biz>

next in thread | raw e-mail | index | archive | help
	I have a HP Pre3 (webos) which when switched into USB tethering mode with 
freetether exposes a RNDIS Ethernet Device.  This should simply appear as ue0 
and off to the races.  Unfortunately it attached via umodem due to the 
usb.conf/devd usb_autoconf scripts and a device class overlap with if_urndis.  
After commenting out those manual attach lines for umodem and kldload 
if_urndis the device still didn't attach.  After going into if_rndis.c and 
enabling the "umodem" conflict section on line  ifrndis.c:173 (I'm running 
10.1) and recompling the kernel module the device appears and 
functions, I'm using it to post this.
	How to I make this permenant (create a quirk?) so I don't have to hack 
usb.conf and if_rndis.c each time I upgrade?

Thanks,

ugen2.2: <webOS-device HP> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON 
(500mA)

  bLength = 0x0012 
  bDescriptorType = 0x0001 
  bcdUSB = 0x0200 
  bDeviceClass = 0x0000 
  bDeviceSubClass = 0x0000 
  bDeviceProtocol = 0x0000 
  bMaxPacketSize0 = 0x0040 
  idVendor = 0x0830 
  idProduct = 0x8056 
  bcdDevice = 0x0326 
  iManufacturer = 0x0001  <HP>
  iProduct = 0x0002  <webOS-device>
  iSerialNumber = 0x0003  <0123456789ABCDEF>
  bNumConfigurations = 0x0001 


 Configuration index 0

    bLength = 0x0009 
    bDescriptorType = 0x0002 
    wTotalLength = 0x0079 
    bNumInterfaces = 0x0004 
    bConfigurationValue = 0x0005 
    iConfiguration = 0x0004  <usbnet+ums+novacom>
    bmAttributes = 0x00c0 
    bMaxPower = 0x00fa 

    Additional Descriptor

    bLength = 0x08
    bDescriptorType = 0x0b
    bDescriptorSubType = 0x00
     RAW dump: 
     0x00 | 0x08, 0x0b, 0x00, 0x02, 0x02, 0x06, 0x00, 0x07


    Interface 0
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0000 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0001 
      bInterfaceClass = 0x0002 
      bInterfaceSubClass = 0x0002 
      bInterfaceProtocol = 0x00ff 
      iInterface = 0x0005  <RNDIS Communications Control>

      Additional Descriptor

      bLength = 0x05
      bDescriptorType = 0x24
      bDescriptorSubType = 0x00
       RAW dump: 
       0x00 | 0x05, 0x24, 0x00, 0x10, 0x01


      Additional Descriptor

      bLength = 0x05
      bDescriptorType = 0x24
      bDescriptorSubType = 0x01
       RAW dump: 
       0x00 | 0x05, 0x24, 0x01, 0x00, 0x01


      Additional Descriptor

      bLength = 0x04
      bDescriptorType = 0x24
      bDescriptorSubType = 0x02
       RAW dump: 
       0x00 | 0x04, 0x24, 0x02, 0x00


      Additional Descriptor

      bLength = 0x05
      bDescriptorType = 0x24
      bDescriptorSubType = 0x06
       RAW dump: 
       0x00 | 0x05, 0x24, 0x06, 0x00, 0x01


     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0082  <IN>
        bmAttributes = 0x0003  <INTERRUPT>
        wMaxPacketSize = 0x0008 
        bInterval = 0x0009 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 


    Interface 1
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0001 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0002 
      bInterfaceClass = 0x000a 
      bInterfaceSubClass = 0x0000 
      bInterfaceProtocol = 0x0000 
      iInterface = 0x0006  <RNDIS Ethernet Data>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0081  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

     Endpoint 1
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0001  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 


    Interface 2
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0002 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0002 
      bInterfaceClass = 0x0008 
      bInterfaceSubClass = 0x0006 
      bInterfaceProtocol = 0x0050 
      iInterface = 0x0000  <no string>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0083  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

     Endpoint 1
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0002  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0001 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 


    Interface 3
      bLength = 0x0009 
      bDescriptorType = 0x0004 
      bInterfaceNumber = 0x0003 
      bAlternateSetting = 0x0000 
      bNumEndpoints = 0x0002 
      bInterfaceClass = 0x00ff 
      bInterfaceSubClass = 0x0047 
      bInterfaceProtocol = 0x0011 
      iInterface = 0x0008  <Novacom>

     Endpoint 0
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0084  <IN>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0000 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 

     Endpoint 1
        bLength = 0x0007 
        bDescriptorType = 0x0005 
        bEndpointAddress = 0x0003  <OUT>
        bmAttributes = 0x0002  <BULK>
        wMaxPacketSize = 0x0200 
        bInterval = 0x0001 
        bRefresh = 0x0000 
        bSynchAddress = 0x0000 




-- 
Anish Mistry



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1580934.Kkj0kKdA3z>