Date: Fri, 24 Jun 2005 22:59:29 +0200 (CEST) From: "SectorONE" <amd64@cybernetwork.org> To: freebsd-amd64@freebsd.org Subject: Dell 6850 Dual Intel 64-bit Xeon MP and no SMP Message-ID: <1642.192.168.1.25.1119646769.squirrel@192.168.1.25>
next in thread | raw e-mail | index | archive | help
I need some help here. I’ve been running FreeBSD for some years now and only i386 platform. This time I’ve bought some new Dell PowerEdge servers and need the possibility to address more than 4GB of ram and use some 64-bit stuff. One of them is a Dell PowerEdge 6850 with dual Intel 64-bit Xeon MP prosessors. After installing FreeBSD/amd64 5.4-RELEASE, I cvsuped for stable and now got 5.4-RELEASE-p2. I then added SMP support in my kernel and compiled world, compiled kernel installed kernel and installed world.(and of course some mergemaster in between) When I reboot the machine the dmesg gives me the following disturbing info: --- quote on --- SMP: CPU 8 exceeds maximum CPU 7, ignoring SMP: CPU 14 exceeds maximum CPU 7, ignoring SMP: CPU 9 exceeds maximum CPU 7, ignoring SMP: CPU 15 exceeds maximum CPU 7, ignoring --- quote off --- What in the world is going on here? I’ve only got 2 physical CPUs with HTT(or something). Is there something wrong with some CPU_ID? I’m confused and need help. Right now there is no SMP working. Here is the complete dmesg: --- quote on --- monstrous# dmesg SMP: CPU 8 exceeds maximum CPU 7, ignoring SMP: CPU 14 exceeds maximum CPU 7, ignoring SMP: CPU 9 exceeds maximum CPU 7, ignoring SMP: CPU 15 exceeds maximum CPU 7, ignoring Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE-p2 #2: Fri Jun 24 19:52:54 CEST 2005 sectorone@monstrous.pcom.no:/usr/obj/usr/src/sys/MONSTROUS Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) MP CPU 3.66GHz (3657.53-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf41 Stepping = 1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x659d<SSE3,RSVD2>,MON,DS_CPL,EST,TM2,CNTX-ID,CX16,<b14>> AMD Features=0x20100800<SYSCALL,NX,LM> Hyperthreading: 2 logical CPUs real memory = 5100273664 (4864 MB) avail memory = 4117934080 (3927 MB) ACPI APIC Table: <DELL PE68x0 > ioapic1: Changing APIC ID to 1 ioapic1: WARNING: intbase 32 != expected base 24 ioapic2: Changing APIC ID to 2 ioapic2: WARNING: intbase 64 != expected base 56 ioapic3: Changing APIC ID to 3 ioapic3: WARNING: intbase 96 != expected base 88 ioapic4: Changing APIC ID to 4 ioapic4: WARNING: intbase 128 != expected base 120 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 32-55 on motherboard ioapic2 <Version 2.0> irqs 64-87 on motherboard ioapic3 <Version 2.0> irqs 96-119 on motherboard ioapic4 <Version 2.0> irqs 128-151 on motherboard acpi0: <DELL PE68x0> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci7: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci8: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci11: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci14: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> mem 0xdf6ff000-0xdf6fffff at device 0.0 on pci14 pci15: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci14 pci18: <ACPI PCI bus> on pcib8 bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xdf8f0000-0xdf8fffff irq 64 at device 2.0 on pci18 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0f:1f:ff:ab:3c bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xdf8e0000-0xdf8effff irq 65 at device 2.1 on pci18 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:0f:1f:ff:ab:3d pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci19: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci19 pci20: <ACPI PCI bus> on pcib10 amr0: <LSILogic MegaRAID 1.51> mem 0xdf4c0000-0xdf4fffff,0xdd0f0000-0xdd0fffff irq 110 at device 14.0 on pci20 amr0: <LSILogic PERC 4e/Di> Firmware 513W, BIOS H419, 256MB RAM pcib11: <ACPI PCI-PCI bridge> at device 0.2 on pci19 pci21: <ACPI PCI bus> on pcib11 pci0: <memory, RAM> at device 9.0 (no driver attached) pci0: <memory, RAM> at device 9.1 (no driver attached) pci0: <memory, RAM> at device 9.2 (no driver attached) pci0: <memory, RAM> at device 9.3 (no driver attached) pci0: <memory, RAM> at device 9.4 (no driver attached) pci0: <memory, RAM> at device 9.5 (no driver attached) pci0: <memory, RAM> at device 9.6 (no driver attached) pci0: <memory, RAM> at device 9.7 (no driver attached) pci0: <memory, RAM> at device 11.0 (no driver attached) pci0: <memory, RAM> at device 11.1 (no driver attached) pci0: <memory, RAM> at device 11.2 (no driver attached) pci0: <memory, RAM> at device 11.3 (no driver attached) pci0: <memory, RAM> at device 11.4 (no driver attached) pci0: <memory, RAM> at device 11.5 (no driver attached) pci0: <memory, RAM> at device 11.6 (no driver attached) pci0: <memory, RAM> at device 11.7 (no driver attached) pci0: <memory, RAM> at device 13.0 (no driver attached) pci0: <memory, RAM> at device 13.1 (no driver attached) pci0: <memory, RAM> at device 13.2 (no driver attached) pci0: <memory, RAM> at device 13.3 (no driver attached) pci0: <memory, RAM> at device 13.4 (no driver attached) pci0: <memory, RAM> at device 13.5 (no driver attached) pci0: <memory, RAM> at device 13.6 (no driver attached) pci0: <memory, RAM> at device 13.7 (no driver attached) pci0: <memory, RAM> at device 15.0 (no driver attached) pci0: <memory, RAM> at device 15.1 (no driver attached) pci0: <memory, RAM> at device 15.2 (no driver attached) pci0: <memory, RAM> at device 15.3 (no driver attached) pci0: <memory, RAM> at device 15.4 (no driver attached) pci0: <memory, RAM> at device 15.5 (no driver attached) pci0: <memory, RAM> at device 15.6 (no driver attached) pci0: <memory, RAM> at device 15.7 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x6ce0-0x6cff irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x6cc0-0x6cdf irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x6ca0-0x6cbf irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci22: <ACPI PCI bus> on pcib12 pci22: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xce800-0xcffff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub3: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2 uhub3: 2 ports with 2 removable, self powered Timecounter "TSC" frequency 3657528028 Hz quality 800 Timecounters tick every 1.000 msec IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default acd0: CDROM <HL-DT-ST GCR-8240N/1.06> at ata0-master PIO4 amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 139760MB (286228480 sectors) RAID 5 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <PE/PV 1x5 SCSI BP 1.0> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device Mounting root from ufs:/dev/amrd0s1a Interrupt storm detected on "irq18: uhci2"; throttling interrupt source --- quote off --- My co-workers talk about substituting me and start running something called linux on it.. and I refuse.. Please help :)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1642.192.168.1.25.1119646769.squirrel>