Date: Thu, 2 Oct 1997 10:41:37 -0500 (CDT) From: "Paul T. Root" <proot@horton.iaces.com> To: mike@smith.net.au (Mike Smith) Cc: mobile@freebsd.org Subject: Re: problems with PCMCIA cards Message-ID: <199710021541.KAA09985@horton.iaces.com> In-Reply-To: <199710020454.OAA00331@word.smith.net.au> from Mike Smith at "Oct 2, 97 02:24:21 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
In a previous message, Mike Smith said:
> > pccard.conf:
> >
> > # Generally available IO ports
> > io 0x240-0x2e0 0x300-0x360
> > # Generally available IRQs
> > irq 10 11
> ...
> > # Megahertz CC3288
> > card "MEGAHERTZ" "CC3288"
> > config 0x23 "sio1" 11
>
> Um, on my XJ4336-CC4336 config index 0x23 looks like this :
>
> Tuple #8, code = 0x1b (Configuration entry), length = 7
> 000: 23 08 aa 60 e8 02 07
> Config index = 0x23
> Card decodes 10 address lines, 8 Bit I/O only
> I/O address # 1: block start = 0x2e8 block length = 0x8
>
> But that's not allowed by your 'io' declaration above. I'd just leave
> the whole 0x240-0x360 range open and pick your config indexes carefully.
Ok. I guess I'm a slow learner. I changed io to be 0x240-0x360 like you
said (I'd just taken whatever pao had given me). The megahertz card was
not in the pccard.conf.sample, so I just copied one (XJ2288 I think).
So what I want to do is pick an index that has an io address inside
the io range in the pccard.conf file. And a free irq, or do I want to
use irq 3 since that's sio1?
Wouldn't I want to use the io range of sio1? That's 0x2f8 isn't it?
The errors I get are:
Oct 2 10:23:45 fievel pccardd[285]: Card "MEGAHERTZ"("CC3288") matched "MEGAHERTZ" ("CC3288")
Oct 2 10:23:49 fievel pccardd[285]: driver allocations failed for MEGAHERTZ (Invalid argument)
when I try: config 0x23 "sio1" 3
or
Oct 2 10:25:25 fievel pccardd[311]: Card "MEGAHERTZ"("CC3288") matched "MEGAHERTZ" ("CC3288")
Oct 2 10:25:28 fievel /kernel: Return IRQ=11
Oct 2 10:25:28 fievel /kernel: stray irq 11
Oct 2 10:25:28 fievel pccardd[311]: driver allocations failed for MEGAHERTZ (Operations not supported by device)
Here's the pccardc dumpcis info on the CC3288:
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x11 (Long link to attribute memory), length = 4
000: 10 01 00 00
Long link to attribute memory, address 0x110
Tuple #3, code = 0x15 (Version 1 info), length = 38
000: 04 01 4d 45 47 41 48 45 52 54 5a 00 43 43 33 32
010: 38 38 00 56 2e 33 34 20 50 43 4d 43 49 41 20 4d
020: 4f 44 45 4d 00 ff
Version = 4.1, Manuf = [MEGAHERTZ],card vers = [CC3288]
Addit. info = [V.34 PCMCIA MODEM],[ÿ]
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 23 00 01 0f
Reg len = 2, config register addr = 0x100, last config = 0x23
Registers: XXXX----
Tuple #6, code = 0x1b (Configuration entry), length = 16
000: e0 41 99 49 55 2e 55 aa 60 f8 03 07 70 ff ff 28
Config index = 0x20(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 2.5 x 100mA
Power down supply current: 5 x 10mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level, Pulse
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Power down supported)
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 21 08 aa 60 f8 02 07
Config index = 0x21
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 22 08 aa 60 e8 03 07
Config index = 0x22
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 23 08 aa 60 e8 02 07
Config index = 0x23
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #10, code = 0xff (Terminator), length = 0
Tuple #11, code = 0x13 (Link target), length = 3
000: 43 49 53
Tuple #12, code = 0x20 (Manufacturer ID), length = 4
000: 02 01 00 00
PCMCIA ID = 0x102, OEM ID = 0x0
Tuple #13, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 5c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #14, code = 0x22 (Functional EXT), length = 9
000: 01 1f 1f ff 03 00 ff 03 00
Modem interface capabilities:
Tuple #15, code = 0x22 (Functional EXT), length = 12
000: 02 00 06 1f 3f 03 03 08 07 00 02 b5
Data modem services available:
Tuple #16, code = 0x22 (Functional EXT), length = 8
000: 13 00 06 0f 00 02 00 b5
Tuple #17, code = 0x22 (Functional EXT), length = 8
000: 23 00 06 0f 00 02 00 b5
Tuple #18, code = 0xff (Terminator), length = 0
2 slots found
--
"Heavier-than-air flying machines are impossible." --Lord Kelvin, president,
Royal Society, 1895.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199710021541.KAA09985>