Date: Fri, 12 Mar 1999 11:45:27 -0600 From: Eric Lakin <elakin@psasolar.colltech.com> To: kerberus@inetu.net Cc: freebsd-mobile@freebsd.org Subject: Re: CTX laptop & PCMCIA UPDATE Message-ID: <19990312114527.A29967@psasolar.colltech.com> In-Reply-To: <36E8EF41.A0EF90EA@inetu.net>; from Kerberus on Fri, Mar 12, 1999 at 10:41:05AM %2B0000 References: <199903111941.TAA00672@keep.lan.Awfulhak.org> <36E8EF41.A0EF90EA@inetu.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I am probably wrong about this (feel free to correct me =) but I thought the below dumpcis indicated that your card only supports irq 5. If that's the case, try using set machdep.pccard.pcic_irq=7 and irq 5 config 0x1 "ed0" 5 0x20 in /etc/pccard.conf. I'm sure this can't be right, but it is what i'd try. On Fri, Mar 12, 1999 at 10:41:05AM +0000, Kerberus spread the following propaganda: > set machdep.pccard.pcic_irq=11 > > # BayNetworks NETGEAR FA410TXC Fast Ethernet > #card "NETGEAR" "FA410TX" "Fast Ethernet" > card "NETGEAR" "FA410TX" > config 0x1 "ed0" 7 0x20 > #ether 0xff0 > insert echo NETGEAR FA410TX inserted > insert /etc/pccard_ether ed0 > remove echo NETGEAR FA410TX removed > remove /sbin/ifconfig ed0 delete > > Tuple #8, code = 0x1b (Configuration entry), length = 7 > 000: e0 81 18 45 30 fc be > Config index = 0x20(default) > Interface byte = 0x81 (I/O) wait signal supported > Card decodes 5 address lines, limited 8/16 Bit I/O > IRQ modes: Pulse > IRQ level = 5 > Tuple #9, code = 0x14 (No link), length = 0 > Tuple #10, code = 0xff (Terminator), length = 8 > 000: ca 60 40 03 1f 1b 07 04 > 2 slots found To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990312114527.A29967>