Date: Thu, 6 Mar 2014 23:08:38 -0800 From: <dteske@FreeBSD.org> To: "'Joe Nosay'" <superbisquit@gmail.com>, "'Devin Teske'" <dteske@freebsd.org> Cc: 'FreeBSD Hackers' <freebsd-hackers@freebsd.org>, 'Eugene Grosbein' <eugen@grosbein.net> Subject: RE: How do I create a cloned interface when there is no static connection? Message-ID: <1a1801cf39d4$1155a830$3400f890$@FreeBSD.org> In-Reply-To: <CA%2BWntOsP_eXL2Lzk2=sJzP-Wrzk1kQ2tzVyp6MinKCFsfyf0Tw@mail.gmail.com> References: <CA%2BWntOsoNMF5rd=j2qbtnVv6-6709R7JqPH7j6vzwkqwrA_=GQ@mail.gmail.com> <53181410.1030107@freebsd.org> <CA%2BWntOtphdnTRdks%2Bwe1Nx68CXjaz_u1S1JFm%2BfdKc7X6Qro%2BA@mail.gmail.com> <5318B836.7040301@grosbein.net> <19cd01cf3974$dffa5bf0$9fef13d0$@FreeBSD.org> <CA%2BWntOsP_eXL2Lzk2=sJzP-Wrzk1kQ2tzVyp6MinKCFsfyf0Tw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message-----
> From: Joe Nosay [mailto:superbisquit@gmail.com]
> Sent: Thursday, March 6, 2014 6:52 PM
> To: Devin Teske
> Cc: FreeBSD Hackers; Eugene Grosbein
> Subject: Re: How do I create a cloned interface when there is no static
> connection?
>
> On Thu, Mar 6, 2014 at 2:47 PM, <dteske@freebsd.org> wrote:
>
> >
> >
> > > -----Original Message-----
> > > From: Eugene Grosbein [mailto:eugen@grosbein.net]
> > > Sent: Thursday, March 6, 2014 10:03 AM
> > > To: Joe Nosay
> > > Cc: FreeBSD Hackers
> > > Subject: Re: How do I create a cloned interface when there is no
> > > static connection?
> > >
> > > On 07.03.2014 00:39, Joe Nosay wrote:
> > >
> > > > I'll need a dummy interface inside of the that can be bridged to
> > > > wlan0 outside of the jail. Normal jail with aliases.
> > >
> > > Try epair(4) and give one part of pair to jail and bridge another
> > > part
> > with
> > > wlan0.
> > >
> >
> > Never tried bridging a wlan with netgraph, but I wonder if the method
> > I use for bridging Ethernet with netgraph would work...
> >
> > Using the ngctl command to create an ng_bridge and then multiple
> > ng_eiface devices that you can be shoved into the jail.
> >
> > kldload ng_ether
> > kldload ng_bridge
> > kldload ng_eiface
> > ngctl
> > + mkpeer {IFACE}: bridge lower link0
> > + connect {IFACE}: {IFACE}:lower upper link1
> > + name {IFACE}:lower {IFACE}bridge
> > + quit
> > ifconifg {IFACE} up
> > ngctl
> > + msg {IFACE}: setpromisc 1
> > + msg {IFACE}: setautosrc 0
> > + mkpeer {IFACE}:lower eiface link{N} ether
> > + name {IFACE}bridge:link{N}
> > + show -n {IFACE}bridge:
> > Name: ngeth0 Type: eiface ID: XXXXXXXX Num
> > hooks: N
> > + name {IFACE}bridge:link{N} {NEWIFACE}
> > ifconfig ngeth0 name {NEWNAME}
> > ifconfig {NEWNAME} vnet {JID}
> >
> > Taking care to replace the following from above:
> > {IFACE} - the name of the interface you want to bridge (eg, em0) {N} -
> > link number (starts at 2; increments by-one for each new eiface)
> > {NEWIFACE} - the name of the new eiface (ngethN) device to create
> > {JID} - the jail ID of the jail you want to shove the interface into
> >
> > Of course, never tried this with WiFi.
>
> I did not properly create the jail.conf script. I believe the file of
/etc/rc.d/jail
> should be followed; yet, there is no tutorial on setting it up.
> My /etc/rc.conf file is also improperly setup. How? I don't know; but, I
can tell
> because the system will not boot completely and ctrl+C must be hit to
allow
> logging in.
What release are you using? "uname -spr" is often succinct enough.
--
Devin
_____________
The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1a1801cf39d4$1155a830$3400f890$>