Date: Tue, 18 Jan 2000 11:37:55 -0700 From: "Russell L. Carter" <rcarter@pinyon.org> To: current@FreeBSD.ORG Subject: FIC SD-11 not happy with ata Message-ID: <20000118183755.C526C6C@pinyon.org>
next in thread | raw e-mail | index | archive | help
I swapped out my motherboard and am seeing this now:
ad0: UDMA CRC WRITE ERROR blk# 1140495 retrying
ad0: UDMA CRC WRITE ERROR blk# 1140495 retrying
ad0: UDMA CRC WRITE ERROR blk# 1140495 retrying
ad0: UDMA CRC WRITE ERROR blk# 1140495WARNING: WAIT_READY active=ATA_ACTIVE_ATA
falling back to PIO mode
That doesn't sound good... This drive ran just fine with an
ASUS P2B and seems to run fine on the FIC too.
This is on a farm fresh -current.
I've appended the dmesg.
Cheers,
Russell
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #14: Tue Jan 18 10:44:46 MST 2000
rcarter@chomsky.pinyon.org:/usr/src/sys/compile/CURRENT
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 499034055 Hz
CPU: AMD-K7(tm) Processor (499.03-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x612 Stepping = 2
Features=0x81f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,MMX>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257212416 (251184K bytes)
Preloaded elf kernel "kernel" at 0xc02f3000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-751 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <ATI Mach64-GT graphics accelerator> port 0xd800-0xd8ff mem
0xeefff000-0xeeffffff,0xef000000-0xefffffff at device 3.0 on pci0
pci0: unknown card (vendor=0x12eb, dev=0x0001) at 6.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <VIA 82C686 ATA-66 controller> port 0xffa0-0xffaf at device 7.1 on
pci0
ata-pci0: Busmastering DMA supported
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
de0: <Digital 21143 Fast Ethernet> port 0xc800-0xc87f mem
0xeeffef80-0xeeffefff irq 11 at device 9.0 on pci0
de0: 21143 [10-100Mb/s] pass 3.0
de0: address 00:80:c8:63:47:84
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 5 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Digital Equipment Corp LN09> PCL,PostScript
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: <IBM-DTTA-371440/T71OA73A> ATA-4 disk at ata0 as master
ad0: 13783MB (28229040 sectors), 28005 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 32 depth queue, UDMA33
ad1: <IBM-DPTA-372050/P76OA30A> ATA-4 disk at ata1 as master
ad1: 19574MB (40088160 sectors), 39770 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 32 depth queue, UDMA66
Mounting root from ufs:/dev/ad0s1a
de0: enabling 100baseTX port
ad0: UDMA CRC WRITE ERROR blk# 1140495 retrying
ad0: UDMA CRC WRITE ERROR blk# 1140495 retrying
ad0: UDMA CRC WRITE ERROR blk# 1140495 retrying
ad0: UDMA CRC WRITE ERROR blk# 1140495WARNING: WAIT_READY active=ATA_ACTIVE_ATA
falling back to PIO mode
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000118183755.C526C6C>