Date: Tue, 30 May 2000 00:13:50 -0500 (CDT) From: Larry Rosenman <ler@lerctr.org> To: freebsd-stable@freebsd.org Subject: Re: make buildworld, I give up. Message-ID: <200005300513.e4U5DoP04521@lerami.lerctr.org> In-Reply-To: <200005300028.e4U0S7i20986@lerami.lerctr.org> "from Larry Rosenman at May 29, 2000 07:28:07 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
More news..... It seems it may have been a hardware flake... It hung at one point in that make buildworld, and after reset the problem (objcopy not compiling) was back. After a number of the below recipes, I moved the 128Meg SDRAM stick to the other socket on the motherboard, and it's chugging along again. I hate hardware flakes. LER > Ok, I fixed it myself... > > After newfs'ing the /usr/src directory, and reinstalling > the sources from my 4.0-RELEASE cdrom, and then > cd /usr/include > rm -rf * > cd /usr/src > make includes > cd /usr/obj > rm -rf usr > cd /usr/src > make buildworld >& make.out & > > it seems to be working. > > What happened? I don't know, but I seem to be on the way to getting > back to 4.0-STABLE. > > Larry Rosenman > > > > From owner-freebsd-stable@FreeBSD.ORG Mon May 29 17:55:09 2000 > > Delivered-To: freebsd-stable@freebsd.org > > From: Larry Rosenman <ler@lerctr.org> > > Message-Id: <200005292253.e4TMrh516527@lerami.lerctr.org> > > Subject: make buildworld, I give up. > > To: freebsd-stable@FreeBSD.ORG > > Date: Mon, 29 May 2000 17:53:43 -0500 (CDT) > > X-Mailer: ELM [version 2.4ME+ PL77 (25)] > > Sender: owner-freebsd-stable@FreeBSD.ORG > > X-Loop: FreeBSD.ORG > > Precedence: bulk > > X-Status: > > X-SCO-PAD: XXXXXX > Content-Length: 5722 > > > OK, I'm the one having trouble with objcopy dieing when compiling. > > > > Here's what I've tried, and I give up. > > > > 1) re-installed the 4.0-RELEASE source tree from the 4.0-RELEASE > > CD I got from WC on my subscription > > 2) make buildworld (dies in the same place) > > 3) FTP installed the Sources from the primary site > > 4) make buildworld dies in the same place. > > 5) took /usr/src from a KNOWN WORKING 4.0-STABLE system, and > > restored it (after verifying it still worked...) > > 6) it dies too on a make buildworld. > > > > I'm at a big loss. > > > > Anyone got ANY ideas? > > > > The system running is now 4.0-RELEASE just installed from > > the 4.0-RELEASE CD set. > > > > I'm willing to give shell/root access to anyone willing to > > help (contact me off list or by phone). > > > > System Details: > > > > AMD K6-2 3D 550 > > 128 Meg SDRAM > > AHA-2940 ctrlr > > 2 1.0 GIG Seagates > > 1 4.2 GIG Seagate > > 1 9.0 GIG IBM > > > > KERNEL Config: > > > > # > > # LERBSD > > # > > > > machine i386 > > cpu I586_CPU > > cpu I686_CPU > > ident LERBSD > > maxusers 64 > > > > #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > > > options INET #InterNETworking > > options INET6 #IPv6 communications protocols > > options FFS #Berkeley Fast Filesystem > > options FFS_ROOT #FFS usable as root device [keep this!] > > options NFS #Network Filesystem > > options MSDOSFS #MSDOS Filesystem > > options CD9660 #ISO 9660 Filesystem > > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > > options PROCFS #Process filesystem > > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > > options SCSI_DELAY=10000 #Delay (in ms) before probing SCSI > > options UCONSOLE #Allow users to grab the console > > options KTRACE #ktrace(1) support > > options SYSVSHM #SYSV-style shared memory > > options SYSVMSG #SYSV-style message queues > > options SYSVSEM #SYSV-style semaphores > > options P1003_1B #Posix P1003_1B real-time extentions > > options _KPOSIX_PRIORITY_SCHEDULING > > options ICMP_BANDLIM #Rate limit bad replies > > ## > > options CPU_WT_ALLOC > > options NO_F00F_HACK > > options NO_MEMORY_HOLE > > # To make an SMP kernel, the next two are needed > > #options SMP # Symmetric MultiProcessor Kernel > > #options APIC_IO # Symmetric (APIC) I/O > > # Optionally these may need tweaked, (defaults shown): > > #options NCPU=2 # number of CPUs > > #options NBUS=4 # number of busses > > #options NAPIC=1 # number of IO APICs > > #options NINTR=24 # number of INTs > > > > device isa > > device pci > > > > # Floppy drives > > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > > device fd0 at fdc0 drive 0 > > > > # SCSI Controllers > > device ahc # AHA2940 and onboard AIC7xxx devices > > > > > > # SCSI peripherals > > device scbus # SCSI bus (required) > > device da # Direct Access (disks) > > device sa # Sequential Access (tape etc) > > device cd # CD > > device pass # Passthrough device (direct SCSI access) > > > > > > # atkbdc0 controls both the keyboard and the PS/2 mouse > > device atkbdc0 at isa? port IO_KBD > > device atkbd0 at atkbdc? irq 1 > > device psm0 at atkbdc? irq 12 > > > > device vga0 at isa? > > > > # splash screen/screen saver > > pseudo-device splash > > > > # syscons is the default console driver, resembling an SCO console > > device sc0 at isa? > > > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > > #device vt0 at isa? > > #options XSERVER # support for X server on a vt console > > #options FAT_CURSOR # start with block cursor > > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > > > # Floating point support - do not disable. > > device npx0 at nexus? port IO_NPX irq 13 > > > > # Power management support (see LINT for more options) > > device apm0 at nexus? disable flags 0x20 # Advanced Power Management > > > > > > # Serial (COM) ports > > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > > device sio1 at isa? port IO_COM2 irq 3 > > > > # Parallel port > > device ppc0 at isa? irq 7 > > device ppbus # Parallel port bus (required) > > device lpt # Printer > > device plip # TCP/IP over parallel > > device ppi # Parallel port interface device > > #device vpo # Requires scbus and da > > > > > > # ISA Ethernet NICs. > > device ep > > > > # Pseudo devices - the number indicates how many units to allocated. > > pseudo-device loop # Network loopback > > pseudo-device ether # Ethernet support > > pseudo-device sl 1 # Kernel SLIP > > pseudo-device ppp 1 # Kernel PPP > > pseudo-device tun # Packet tunnel. > > pseudo-device pty # Pseudo-ttys (telnet etc) > > pseudo-device md # Memory "disks" > > pseudo-device gif 4 # IPv6 and IPv4 tunneling > > pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > > # Be aware of the administrative consequences of enabling this! > > pseudo-device bpf #Berkeley packet filter > > > > # USB support > > #device uhci # UHCI PCI->USB interface > > #device ohci # OHCI PCI->USB interface > > #device usb # USB Bus (required) > > #device ugen # Generic > > #device uhid # "Human Interface Devices" > > #device ukbd # Keyboard > > #device ulpt # Printer > > #device umass # Disks/Mass storage - Requires scbus and da > > #device ums # Mouse > > # USB Ethernet, requires mii > > #device aue # ADMtek USB ethernet > > #device cue # CATC USB ethernet > > #device kue # Kawasaki LSI USB ethernet > > > > #### END ### > > > > Any Ideas? > > > > LER > > > > -- > > Larry Rosenman http://www.lerctr.org/~ler > > Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org > > US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message > > > -- > Larry Rosenman http://www.lerctr.org/~ler > Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org > US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 (voice) Internet: ler@lerctr.org US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200005300513.e4U5DoP04521>