Date: Wed, 14 Feb 2001 22:19:24 +0100 From: Pierre DAVID <Pierre.David@crc.u-strasbg.fr> To: freebsd-mobile@freebsd.org Subject: NEWCARD & xl0: watchdog timeout Message-ID: <20010214221923.A42439@vagabond.ma.maison>
next in thread | raw e-mail | index | archive | help
--azLHFNyN32YCQGCU
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi,
I just upgraded my Dell Latitude LT from 4.2-RELEASE TO
-current (just before 9h Feb): all is working perfectly
with a GENERIC kernel, pccardd and a 3Com 3C589 Ethernet
card.
However, when I try to boot with a NEWCARD kernel:
- with the 3Com 3C589, I cannot get anything from
the network (ECHO packets are emitted, but
nothing returns)
- with a 3Com 3CCFE575BT-D (xl0) - which works like
a charm with a Sony Vaio - I get lot of:
xl0: watchdog timeout
and all communications are sloooooow.
Attached hereafter are the "boot -v" messages.
Can somebody help me?
Thanks in advance,
Pierre
--azLHFNyN32YCQGCU
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg-ep0
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Feb 14 09:21:41 CET 2001
root@biceps:/users/obj/usr/src/sys/NEWCARD
Calibrating clock(s) ... TSC clock: 262365789 Hz, i8254 clock: 1193064 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P55C (quarter-micron) (262.39-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00537000 - 0x03fe7fff, 61542400 bytes (15025 pages)
avail memory = 60059648 (58652K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f62f0
bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7e0+0x21a
pnpbios: Found PnP BIOS data at 0xc00f6340
pnpbios: Entry = f0000:b99b Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0511000.
Preloaded elf module "splash_bmp.ko" at 0xc05110a8.
Preloaded splash_image_data "/boot/images/daemon.bmp" at 0xc051114c.
Intel Pentium detected, installing workaround for F00F bug
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
WARNING: Driver mistake: destroy_dev on 154/0
Math emulator present
splash: image@0xc04ff2fc, size:65074
splash_bmp: beyond screen capacity (320x200, 255 colors)
bmp_start(): splash_mode:28
splash: image decoder found: splash_bmp
Using $PIR table, 4 entries at 0xc00fdf90
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 158052789 bytes/sec
bzero() bandwidth = 514138817 bytes/sec
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7100, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=1, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000fcc0, size 5, port disabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=1, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=255
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=1, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base fea00000, size 21, enabled
map[18]: type 1, range 32, base fed00000, size 20, enabled
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=0
found-> vendor=0x1180, dev=0x0475, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on pcib0
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 1.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 1.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at 1.3 (no driver attached)
pci0: <display, VGA> at 2.0 (no driver attached)
pccbb0: <RF5C475 PCI-CardBus Bridge> at device 10.0 on pci0
pccbb0: PCI Memory allocated: 44000000
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:10 INTA routed to irq 3
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
ex_isa_identify()
pnpbios: 18 devices, largest 138 bytes
PNP0c01: adding fixed memory32 range 0xca000-0xcbfff, size=0x2000
PNP0c01: skipping empty range
PNP0c01: skipping empty range
PNP0c01: skipping empty range
PNP0c01: skipping empty range
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xd000-0xd000, size=0x1, align=0x1
PNP0c02: adding io range 0xd004-0xd004, size=0x1, align=0x1
PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c02: end config
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000
PNP0c01: end config
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
PNP0100: end config
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
PNP0303: end config
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
PNP0e03: end config
pnpbios: handle 11 device ID PNP0e03 (030ed041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0400: adding irq mask 0x80
PNP0400: end config
pnpbios: handle 19 device ID PNP0400 (0004d041)
CSC0000: adding io range 0x530-0x537, size=0x8, align=0x1
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x8
CSC0000: adding irq mask 0x20
CSC0000: end config
pnpbios: handle 23 device ID CSC0000 (0000630e)
CSC0010: adding io range 0xf00-0xf07, size=0x8, align=0x8
CSC0010: end config
pnpbios: handle 26 device ID CSC0010 (1000630e)
PNP0f13: end config
pnpbios: handle 27 device ID PNP0f13 (130fd041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 28 device ID PNP0700 (0007d041)
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
adv0 failed to probe at port 0x330 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 10 on isa0
pcic ident regs: 0x83 0xff 0xff 0xff
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pccard1: <16-bit PCCard bus> on pcic0
pcic0: bus_space_alloc range 0x0330-0x03ff (probed)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x65 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0b00> can't assign resources
unknown: <PNP0b00> at port 0x70-0x71 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0e03> can't assign resources
unknown: <PNP0e03> at port 0x3e0-0x3e1 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x378-0x37f on isa0
pcm0: <CS423x> at port 0x530-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,3 on isa0
pcm: setmap 6c7000, 1000; 0xc5d13000 -> 6c7000
pcm: setmap 6c8000, 1000; 0xc5d14000 -> 6c8000
adv1: Invalid baseport of 0xf00 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <CSC0010> failed to probe at port 0xf00-0xf0f on isa0
unknown: <PNP0f13> failed to probe at port 0x330 on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
BIOS Geometries:
0:020cfe3f 0..524=525 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
ata0-master: success setting UDMA2 on PIIX4 chip
Creating DISK ad0
ad0: <TOSHIBA MK4309MAT/G5.01 B> ATA-4 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4126MB <TOSHIBA MK4309MAT> [8944/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 819314, size 819252 : OK
ad0s2: type 0xa5, start 819315, end = 8450189, size 7630875 : OK
pccbb0: card inserted: event=0x00000000, state=30000410
pccard0: chip_socket_enable
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is mem
pccard0: read_cis
pccbb_pcic_mem_map window 0 bus 44001000+400+bbfff000 card addr 0
pccbb_pcic_do_mem_map window 0: 8001 8001 3fff 44 (44001000+00000400.00001000*bbfff000)
pccbb_pcic_do_mem_map window 0: 8001 8001 7fff 44 (44001000+00000400.00001000*bbfff000)
cis mem map c6365000
pccard0: CIS tuple chain:
CISTPL_DEVICE type=null speed=null
01 02 00 ff
CISTPL_DEVICE_A type=eeprom speed=150ns
17 03 43 02 ff
CISTPL_MANFID
20 04 01 01 89 05
CISTPL_FUNCID
21 02 06 00
CISTPL_VERS_1
15 39 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61
74 69 6f 6e 00 33 43 35 38 39 00 54 50 2f 42 4e
43 20 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20
32 61 00 30 30 30 30 30 32 00 ff
CISTPL_CONFIG
1a 06 02 03 00 00 01 03
CISTPL_CFTABLE_ENTRY
1b 0f c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff
ff
CISTPL_CFTABLE_ENTRY
1b 07 03 01 71 55 26 26 54
unhandled CISTPL 19
19 03 00 00 ff
CISTPL_NO_LINK
14 00
CISTPL_CHECKSUM addr=0 len=80 cksum=0 ok
10 05 89 ff 80 00 00
CISTPL_END
ff
pccard0: check_cis_quirks
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002
pccard0: Manufacturer code 0x101, product 0x589
pccard0: function 0: network adapter, ccr addr 10000 mask 3
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pccard0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; rdybsy_active wp_active bvd_active io8 io16 irqlevel
pccard0: functions scanning
pccbb_pcic_socket_enable:
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_5V and CARD_VPP_VCC [15]
pccbb0: pccbb_pcic_wait_ready: status 0x7f
pccbb0: card type is io
pccard0: ++enabled_count = 1
pccbb_pcic_mem_map window 0 bus 44001000+400+bbfff000 card addr 0
pccbb_pcic_do_mem_map window 0: 8001 8001 3fff 44 (44001000+00000400.00001000*bbfff000)
pccard0: ccr_res == 44001000-440013ff, base=10000
pccbb_pcic_do_mem_map window 0: 8001 8001 7fff 44 (44001000+00000400.00001000*bbfff000)
pccbb_pcic_do_mem_map window 0: 8001 8001 400f 44 (44001000+00000400.00001000*bc00f000)
pccard0: function 0 CCR at 0 offset 0: 41 0 41 0, 0 41 0 41, 0
ep0: <3Com 3c589 10Mbps Ethernet> at port 0x100-0x10f irq 3 function 0 config 1 on pccard0
pccbb_pcic_io_map window 0 auto port 100+10
pccbb_pcic_do_io_map window 0: 0100 010f (00000100+00000010)
pccbb_pcic_io_map window 0 auto port 100+10
pccbb_pcic_do_io_map window 0: 0100 010f (00000100+00000010)
ep0: Ethernet address 00:a0:24:a5:4b:22
bpf: ep0 attached
pccard0: function 0 CCR at 0 offset 0: 45 0 45 0, 0 45 0 45, 0
start_init: trying /sbin/init
Connection attempt to UDP 192.44.67.2:1024 from 192.44.67.6:53
Connection attempt to UDP 192.44.67.2:1025 from 192.44.67.6:53
--azLHFNyN32YCQGCU
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename=dmesg-xl0
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Wed Feb 14 09:21:41 CET 2001
root@biceps:/users/obj/usr/src/sys/NEWCARD
Calibrating clock(s) ... TSC clock: 262364233 Hz, i8254 clock: 1193059 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium/P55C (quarter-micron) (262.39-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x582 Stepping = 2
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00537000 - 0x03fe7fff, 61542400 bytes (15025 pages)
avail memory = 60059648 (58652K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f62f0
bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7e0+0x21a
pnpbios: Found PnP BIOS data at 0xc00f6340
pnpbios: Entry = f0000:b99b Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0511000.
Preloaded elf module "splash_bmp.ko" at 0xc05110a8.
Preloaded splash_image_data "/boot/images/daemon.bmp" at 0xc051114c.
Intel Pentium detected, installing workaround for F00F bug
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
WARNING: Driver mistake: destroy_dev on 154/0
Math emulator present
splash: image@0xc04ff2fc, size:65074
splash_bmp: beyond screen capacity (320x200, 255 colors)
bmp_start(): splash_mode:28
splash: image decoder found: splash_bmp
Using $PIR table, 4 entries at 0xc00fdf90
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
i586_bzero() bandwidth = 158077774 bytes/sec
bzero() bandwidth = 512820512 bytes/sec
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7100, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=1, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000fcc0, size 5, port disabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=1, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=255
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=1, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base fea00000, size 21, enabled
map[18]: type 1, range 32, base fed00000, size 20, enabled
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=0
found-> vendor=0x1180, dev=0x0475, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
pci0: <PCI bus> on pcib0
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 1.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 1.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at 1.3 (no driver attached)
pci0: <display, VGA> at 2.0 (no driver attached)
pccbb0: <RF5C475 PCI-CardBus Bridge> at device 10.0 on pci0
pccbb0: PCI Memory allocated: 44000000
pci_cfgintr_virgin: using routable interrupt 3
pci_cfgintr: 0:10 INTA routed to irq 3
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
ex_isa_identify()
pnpbios: 18 devices, largest 138 bytes
PNP0c01: adding fixed memory32 range 0xca000-0xcbfff, size=0x2000
PNP0c01: skipping empty range
PNP0c01: skipping empty range
PNP0c01: skipping empty range
PNP0c01: skipping empty range
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xd000-0xd000, size=0x1, align=0x1
PNP0c02: adding io range 0xd004-0xd004, size=0x1, align=0x1
PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c02: end config
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0x100000-0x3ffffff, size=0x3f00000
PNP0c01: end config
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
PNP0100: end config
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
PNP0303: end config
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
PNP0e03: end config
pnpbios: handle 11 device ID PNP0e03 (030ed041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 17 device ID PNP0501 (0105d041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0400: adding irq mask 0x80
PNP0400: end config
pnpbios: handle 19 device ID PNP0400 (0004d041)
CSC0000: adding io range 0x530-0x537, size=0x8, align=0x1
CSC0000: adding io range 0x388-0x38b, size=0x4, align=0x8
CSC0000: adding io range 0x220-0x22f, size=0x10, align=0x20
CSC0000: adding dma mask 0x2
CSC0000: adding dma mask 0x8
CSC0000: adding irq mask 0x20
CSC0000: end config
pnpbios: handle 23 device ID CSC0000 (0000630e)
CSC0010: adding io range 0xf00-0xf07, size=0x8, align=0x8
CSC0010: end config
pnpbios: handle 26 device ID CSC0010 (1000630e)
PNP0f13: end config
pnpbios: handle 27 device ID PNP0f13 (130fd041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 28 device ID PNP0700 (0007d041)
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
adv0 failed to probe at port 0x330 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 10 on isa0
pcic ident regs: 0x83 0xff 0xff 0xff
pcic0: controller 0 (Intel 82365SL Revision 1) has socket A only
pccard1: <16-bit PCCard bus> on pcic0
pcic0: bus_space_alloc range 0x0330-0x03ff (probed)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: Cannot allocate irq
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
adv1: Invalid baseport of 0x65 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0b00> can't assign resources
unknown: <PNP0b00> at port 0x70-0x71 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe.
adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <PNP0e03> can't assign resources
unknown: <PNP0e03> at port 0x3e0-0x3e1 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x378-0x37f on isa0
pcm0: <CS423x> at port 0x530-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,3 on isa0
pcm: setmap 6c7000, 1000; 0xc5d13000 -> 6c7000
pcm: setmap 6c8000, 1000; 0xc5d14000 -> 6c8000
adv1: Invalid baseport of 0xf00 specified. Nearest valid baseport is 0x330. Failing probe.
unknown: <CSC0010> failed to probe at port 0xf00-0xf0f on isa0
unknown: <PNP0f13> failed to probe at port 0x330 on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
BIOS Geometries:
0:020cfe3f 0..524=525 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
ata0-master: success setting UDMA2 on PIIX4 chip
Creating DISK ad0
ad0: <TOSHIBA MK4309MAT/G5.01 B> ATA-4 disk at ata0-master
ad0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 4126MB <TOSHIBA MK4309MAT> [8944/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 819314, size 819252 : OK
ad0s2: type 0xa5, start 819315, end = 8450189, size 7630875 : OK
pccbb0: card inserted: event=0x00000000, state=30000820
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
found-> vendor=0x10b7, dev=0x5157, revid=0x01
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=128
TUPLE: LINKTARGET [3]: 43 49 53
Manufacturer ID: 01015751
TUPLE: CONFIG_CB [6]: 03 01 00 00 00 00
TUPLE: CFTABLE_ENTRY_CB [12]: 41 9a 01 b5 1e 01 55 02 30 ff ff 01
cardbus0: Opening BAR: type=IO, bar=10, len=0040
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575BT | LAN Cardbus Card | 001 |
Functions: Network Adaptor, Memory
TUPLE: CFTABLE_ENTRY_CB [6]: 00 80 80 80 80 19
CIS reading done
xl0: <3Com 3c575B Fast Etherlink XL> port 0x3000-0x307f mem 0x44020000-0x4403ffff,0x44001080-0x440010ff,0x44001000-0x4400107f irq 3 at device 0.0 on cardbus0
xl0: Ethernet address: 00:50:04:8c:d4:ae
xl0: media options word: 40
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x00c000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
start_init: trying /sbin/init
xl0: watchdog timeout
--azLHFNyN32YCQGCU--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010214221923.A42439>