Date: Fri, 20 Apr 2001 04:39:20 -0700 (PDT) From: Teddy Lionard <goldentuxedo@rocketmail.com> To: freebsd-questions@FreeBSD.ORG Subject: SB Live! Problem... Message-ID: <20010420113920.31958.qmail@web12903.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
well, i am kind of a newbie around the freebsd,
so, i've decided to send this mail, with the boot
message below...
well, currently i am trying to recompile the kernel,
so it can use the sb live! that is mounted on the
system. and i have followed every procedure on the
freebsd's handbook, and also asking friends that also
have live and freebsd installed on the system...
but it seems that a very uncommon error has occured
after i recompile the kernel and reboot, so i tried to
do some modification on the kernel emu10k1.c, but
still unable to get rid the error...
( i only add the line "device pcm" to the GENERIC
kernel)
so plzzzzz, helppppppp me...
thx in advance...
best regard...
teddy
/////////////////////////////////////////////////////
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 4.2-RELEASE #0: Thu Apr 19 22:16:22 JAVT 2001
root@:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (602.71-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134201344 (131056K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> q
avail memory = 126087168 (123132K bytes)
Preloaded elf kernel "kernel" at 0xc047d000.
Preloaded userconfig_script "/boot/kernel.conf" at
0xc047d09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP)
bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <3Dfx Voodoo 3 graphics accelerator> at 0.0 irq
11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port
0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f
irq 10 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f
irq 10 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
// well, it is still alright here
pcm0: <Creative EMU10K1> at device 9.0 on pci0
// this is my own modification to emu10k1.c
// when they are trying to detect something,
// which i don't know anything about...
pcm0: try = 0
pcm0: reg id = 10
pcm0: reg type = 3
pcm0: trying reg type = 4
pcm0: Failed here
pcm0: try = 1
pcm0: reg id = 14
pcm0: reg type = 3
pcm0: trying reg type = 4
pcm0: Failed here
pcm0: try = 2
pcm0: reg id = 18
pcm0: reg type = 3
pcm0: trying reg type = 4
pcm0: Failed here
pcm0: try = 3
pcm0: reg id = 1d
pcm0: reg type = 3
pcm0: trying reg type = 4
pcm0: Failed here
pcm0: try = 4
pcm0: reg id = 20
pcm0: reg type = 3
pcm0: trying reg type = 4
pcm0: Failed here
pcm0: try = 5
pcm0: reg id = 24
pcm0: reg type = 3
pcm0: trying reg type = 4
pcm0: Failed here
// end of modification
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6
// the above two line is the problem
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 16555MB <QUANTUM FIREBALLlct08 17> [33637/16/63]
at ata0-master UDMA66
acd0: CDROM <ASUS CD-S400/A> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s3a
/////////////////////////////////////////////////////
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010420113920.31958.qmail>