Date: Fri, 12 Oct 2001 01:15:38 +0100 From: Brian Somers <brian@freebsd-services.com> To: current@FreeBSD.org Cc: Mike Smith <msmith@FreeBSD.org>, Brian Somers <brian@freebsd-services.com> Subject: ACPI panic at boot time in -current Message-ID: <200110120015.f9C0FcP00724@hak.lan.Awfulhak.org>
next in thread | raw e-mail | index | archive | help
Hi,
I was wondering if anybody has any suggestions about why this might
be happening in -current:
Booting [/boot/kernel/kernel]...
/boot/kernel/acpi.ko text=0x32f34 data=0xf9c+0x1028 syms=[0x4+0x49c0+0x4+0x61a]-
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Wed Oct 10 06:33:14 BST 2001
root@hak.lan.Awfulhak.org:/usr/obj/usr/src/sys/HAK
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 97342057 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (97.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201261056 (196544K bytes)
avail memory = 191459328 (186972K bytes)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc043e000.
Preloaded elf module "/boot/kernel/snd_neomagic.ko" at 0xc043e0a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc043e15c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc043e208.
Pentium Pro MTRR support enabled
VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc0354cc2 (1000022)
VESA: MagicGraph 256 AV 48K
Using $PIR table, 6 entries at 0xc00fdf60
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0: <display, VGA> at device 8.0 (no driver attached)
pcm0: <NeoMagic 256AV> mem 0xfec00000-0xfecfffff,0xfe000000-0xfe3fffff irq 9 at device 8.1 on pci0
pci0: <serial bus, FireWire> at device 9.0 (no driver attached)
pccbb0: <RF5C478 PCI-CardBus Bridge> irq 0 at device 10.0 on pci0
pccbb0: PCI Memory allocated: 10000000
acpi_pcib0: device is routed to IRQ 9
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccard0: <16-bit PCCard bus> on pccbb0
pccbb1: <RF5C478 PCI-CardBus Bridge> irq 0 at device 10.1 on pci0
pccbb1: PCI Memory allocated: 10001000
acpi_pcib0: possible interrupts: 9
panic: free: multiple freed item 0xc14f75f0
Debugger("panic")
Stopped at Debugger+0x44: pushl %ebx
db> t
Debugger(c02d159b) at Debugger+0x44
panic(c02d0031,c14f75f0,0,c14f75f0,c0460adc) at panic+0x70
free(c14f75f0,c0430ba0,c0460a6c,c041f218,c14f75f0) at free+0x197
AcpiOsFree(c14f75f0,1,c150be9c,c0460b2c,c14ef9c0) at AcpiOsFree+0x10
AcpiRsSetSrsMethodData(c14e57a0,c0460adc,c0460b64,c0427626,c14e57a0) at AcpiRsSetSrsMethodData+0xc4
AcpiSetCurrentResources(c14e57a0,c0460adc,c14d5188,c14f3c80,c14f9d88) at AcpiSetCurrentResources+0x2b
acpi_pcib_route_interrupt(c14f3c80,c14f9d00,1) at acpi_pcib_route_interrupt+0x6a2
pci_alloc_resource(c14f8700,c14f9d00,1,c0460c0c,0) at pci_alloc_resource+0xa6
bus_alloc_resource(c14f9d00,1,c0460c0c,0,ffffffff) at bus_alloc_resource+0x5d
pccbb_attach(c14f9d00,c14f9d00,c14f3c80,c14f8700,0) at pccbb_attach+0x3d0
device_probe_and_attach(c14f9d00) at device_probe_and_attach+0x9a
bus_generic_attach(c14f8700,c14f8700,c0cdb680,c14f4a40,1) at bus_generic_attach+0x16
device_probe_and_attach(c14f8700) at device_probe_and_attach+0x9a
bus_generic_attach(c14f3c80,c14d5088,c0cdb680,c14f3c80,c0460c90) at bus_generic_attach+0x16
acpi_pcib_attach(c14f3c80,c14f3c80,c0cdb680,c0cdb680,0) at acpi_pcib_attach+0x189
device_probe_and_attach(c14f3c80) at device_probe_and_attach+0x9a
bus_generic_attach(c0cdb680,c0cdb61c,c0cdb600,c0cd2560,c0460cf8) at bus_generic_attach+0x16
acpi_probe_children(c0cdb680,c14cd088,c0cdb880,c0cdb680,6) at acpi_probe_children+0x62
acpi_attach(c0cdb680,c0cdb680,c0cdb880,c0cdb880,1) at acpi_attach+0x1d5
device_probe_and_attach(c0cdb680) at device_probe_and_attach+0x9a
bus_generic_attach(c0cdb880,c14a6088,c0cdbb80,c0460d5c,c01c2786) at bus_generic_attach+0x16
nexus_attach(c0cdb880,c0cdb880,c0cd8dc8,465000,1) at nexus_attach+0xe
device_probe_and_attach(c0cdb880) at device_probe_and_attach+0x9a
root_bus_configure(c0cdbb80,c02f07c0,0,4) at root_bus_configure+0x16
configure(0,45dc00,45d000,0,c0126aac) at configure+0x22
mi_startup() at mi_startup+0x90
begin() at begin+0x43
Cheers.
--
Brian <brian@freebsd-services.com> <brian@Awfulhak.org>
http://www.freebsd-services.com/ <brian@[uk.]FreeBSD.org>
Don't _EVER_ lose your sense of humour ! <brian@[uk.]OpenBSD.org>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200110120015.f9C0FcP00724>