Date: Tue, 3 Sep 2002 01:17:12 +0200 From: Thomas Quinot <thomas@melusine.cuivre.fr.eu.org> To: freebsd-multimedia@freebsd.org Subject: ES1371 full duplex strangeness Message-ID: <20020903011712.C3808@melusine.cuivre.fr.eu.org>
next in thread | raw e-mail | index | archive | help
When my -stable box boots, /dev/audio seems to work fine.
I can play sound files, or cat /dev/audio and see the gibberish happily
react to my speaking in the mike. Unfortunately, if I try anything
involving full duplex (eg: cat /dev/audio > /dev/audio), all I can
subsequently get on any access to the sound card is 'device busy'.
Using gnomemeeting will also always result in loads of '/dev/dsp busy'
messages.
dmesg below. Please feel free to request more information or tests.
Thomas.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #4: Wed Aug 21 02:33:01 CEST 2002
thomas@melusine.cuivre.fr.eu.org:/usr2/obj/usr2/src/sys/MELUSINE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 671076352 (655348K bytes)
config> enable apm
avail memory = 648798208 (633592K bytes)
Preloaded elf kernel "kernel" at 0xc039b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc039b09c.
Pentium Pro MTRR support enabled
Using $PIR table, 6 entries at 0xc00f0d10
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
bktr0: <BrookTree 848A> mem 0xe3000000-0xe3000fff irq 9 at device 9.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicbus1: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Detected a DPL34-1@-@0 at 0x84
bktr0: Intel Smart Video III/VideoLogic Captivator PCI, <no> tuner, dpl3518a dolby.
xl0: <3Com 3c900-COMBO Etherlink XL> port 0xb000-0xb03f irq 9 at device 10.0 on pci0
xl0: Ethernet address: 00:60:97:7c:8c:2c
xl0: selecting 10baseT transceiver, half duplex
pcm0: <AudioPCI ES1371-A> port 0xa800-0xa83f irq 9 at device 11.0 on pci0
sym0: <875> port 0xa400-0xa4ff mem 0xdf800000-0xdf800fff,0xe0000000-0xe00000ff irq 11 at device 12.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 5 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 at port 0x3e8-0x3ef irq 4 on isa0
sio2: type 16550A
sio3 at port 0x2e8-0x2ef irq 10 on isa0
sio3: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc1: <Parallel port> at port 0x278-0x27f on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt1: <Printer> on ppbus1
lpt1: Polled port
ppi1: <Parallel I/O> on ppbus1
IP Filter: v3.4.27 initialized. Default = pass all, Logging = enabled
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA33
ad1: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-slave UDMA33
Waiting 3 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-105F 1.22> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [345351 x 2048 byte records]
cd1 at ata1 bus 0 target 1 lun 0
cd1: <LITE-ON LTR-16102B OS0B> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
da0 at sym0 bus 0 target 6 lun 0
da0: <IBM DDRS-39130W S71D> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
--
Thomas.Quinot@Cuivre.FR.EU.ORG
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020903011712.C3808>