Date: Thu, 2 Jan 2003 16:18:48 +0100 (CET) From: Marcel Stangenberger <marcel@hayholt.org> To: "Brent J. Ermlick" <brent@bermls.oau.org> Cc: questions@freebsd.org Subject: Re: XFree86 lockfile? Message-ID: <20030102161006.M177@eldar.hayholt.org> In-Reply-To: <20030102143903.GA71301@bermls.oau.org> References: <20030102111401.GA65231@bermls.oau.org> <20030102123215.I207@eldar.hayholt.org> <20030102131257.GA4945@fishballoon.dyndns.org> <20030102145019.G199@eldar.hayholt.org> <20030102141916.GA59713@bermls.oau.org> <20030102152110.I199@eldar.hayholt.org> <20030102143903.GA71301@bermls.oau.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 2 Jan 2003, Brent J. Ermlick wrote:
> On Thu, Jan 02, 2003 at 03:29:58PM +0100, Marcel Stangenberger wrote:
> . . .
> > (==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 1 10:02:54 2003
> > (EE) Unable to locate/open config file
> > (EE) Error from xf86HandleConfigFile()
>
> Ah -- I think this is important. You need to reconfigure X.
>
> XFree86 -configure
>
I just did so and reconfigured X, i placed the file in /etc/ en restarted
xdm.
It now says the following in XFree86.0.log
--
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 4.7-RELEASE-p2 i386 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 2 16:02:37 2003
(++) Using config file: "/root/XF86Config.new"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Sp
eedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0635 card 0000,0000 rev 11 class 06,00,00 hdr
80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr
01
(II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr
80
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr
80
(II) PCI: 00:09:0: chip 5333,8a01 card 5333,8a01 rev 01 class 03,00,00 hdr
00
(II) PCI: 00:0d:0: chip 10b7,9004 card 10b7,9004 rev 04 class 02,00,00 hdr
00
(II) PCI: 00:0f:0: chip 1000,0001 card 1000,1000 rev 23 class 01,00,00 hdr
00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x02 (VGA_EN is cleared)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xd7e00000 - 0xd7efffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xd7c00000 - 0xd7cfffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:2:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:9:0) S3 ViRGE/DX or /GX rev 1, Mem @ 0xdc000000/26, BIOS @
0xdbff00
00/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xdbfeff00 - 0xdbfeffff (0x100) MX[B]E
[1] -1 0xdbfefe80 - 0xdbfefeff (0x80) MX[B]E
[2] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E
[3] -1 0xdbff0000 - 0xdbffffff (0x10000) MX[B](B)
[4] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[5] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[6] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[7] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xdbfeff00 - 0xdbfeffff (0x100) MX[B]E
[1] -1 0xdbfefe80 - 0xdbfefeff (0x80) MX[B]E
[2] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E
[3] -1 0xdbff0000 - 0xdbffffff (0x10000) MX[B](B)
[4] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[5] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[6] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[7] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdbfeff00 - 0xdbfeffff (0x100) MX[B]E
[6] -1 0xdbfefe80 - 0xdbfefeff (0x80) MX[B]E
[7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E
[8] -1 0xdbff0000 - 0xdbffffff (0x10000) MX[B](B)
[9] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[13] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[14] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.8.3
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) S3VIRGE: driver (version 1.8.3) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 00:09:0
(--) Chipset virge dx found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdbfeff00 - 0xdbfeffff (0x100) MX[B]E
[6] -1 0xdbfefe80 - 0xdbfefeff (0x80) MX[B]E
[7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E
[8] -1 0xdbff0000 - 0xdbffffff (0x10000) MX[B](B)
[9] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[13] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[14] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdbfeff00 - 0xdbfeffff (0x100) MX[B]E
[6] -1 0xdbfefe80 - 0xdbfefeff (0x80) MX[B]E
[7] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E
[8] -1 0xdbff0000 - 0xdbffffff (0x10000) MX[B](B)
[9] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[16] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[17] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E
[18] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(==) S3VIRGE(0): Depth 8, (==) framebuffer bpp 8
(==) S3VIRGE(0): Default visual is PseudoColor
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(==) S3VIRGE(0): XVideo allowed (depends on chipset).
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) S3VIRGE(0): initializing int10
(==) S3VIRGE(0): Write-combining range (0xa0000,0x20000) was already clear
(==) S3VIRGE(0): Write-combining range (0xf0000,0x10000)
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B
(--) S3VIRGE(0): Chipset: "virge dx"
(==) S3VIRGE(0): Write-combining range (0xdd000000,0x10000) was already
clear
(==) S3VIRGE(0): Write-combining range (0xdd000000,0x8000) was already
clear
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(==) S3VIRGE(0): Write-combining range (0xa0000,0x10000) was already clear
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level none
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 0 sec.
(II) S3VIRGE(0): VESA VBE DDC read failed
(--) S3VIRGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) S3VIRGE(0): I2C bus "I2C bus" initialized.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 50.114 MHz
(WW) S3VIRGE(0): Monitor0: Using default hsync range of 28.00-33.00kHz
(WW) S3VIRGE(0): Monitor0: using default vrefresh range of 43.00-72.00Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "640x350" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "320x175" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "640x400" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "320x200" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "720x400" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "360x200" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "576x432" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out
of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out
of ra
nge)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "832x624" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "416x312" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode
clock/interlace/doub
lescan)
(II) S3VIRGE(0): Not using default mode "1600x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "800x512" (bad mode
clock/interlace/doub
lescan)
(--) S3VIRGE(0): Virtual size is 640x480 (pitch 640)
(**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -h
sync -vsync
(==) S3VIRGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xdc000000 - 0xdfffffff (0x4000000) MS[B]
[1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0xdbfeff00 - 0xdbfeffff (0x100) MX[B]E
[7] -1 0xdbfefe80 - 0xdbfefeff (0x80) MX[B]E
[8] -1 0xe0000000 - 0xffffffff (0x20000000) MX[B]E
[9] -1 0xdbff0000 - 0xdbffffff (0x10000) MX[B](B)
[10] -1 0xdc000000 - 0xdfffffff (0x4000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]E
[17] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[18] -1 0x0000ff00 - 0x0000ffff (0x100) IX[B]E
[19] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[20] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) S3VIRGE(0): Write-combining range (0xdd000000,0x10000) was already
clear
(==) S3VIRGE(0): Write-combining range (0xdd000000,0x8000) was already
clear
(==) S3VIRGE(0): Write-combining range (0xdc000000,0x400000)
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(==) S3VIRGE(0): Write-combining range (0xa0000,0x10000) was already clear
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
7 512x512 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "MouseSystems"
(**) Mouse0: Protocol: "MouseSystems"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(**) Option "BaudRate" "1200"
(**) Option "StopBits" "2"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "0"
(**) Option "FlowControl" "None"
(==) Mouse0: Buttons: 3
(**) Mouse0: BaudRate: 1200
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Option "BaudRate" "1200"
--
so i assume X is working on the server now (i don't have a monitor on the
server) but i'm not getting a login prompt on my Exceed :(
the xdm.log is empty so there are no errors reported by xdm.
xdm is started properly from /etc/ttys
i also rechecked the xdm config files (Xaccess, Xsession, xdm-config and
others) and they are still correct.
Marcel
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030102161006.M177>