Date: Wed, 21 May 2003 16:06:37 -0700 (PDT) From: pat bey <phaza7@yahoo.com> To: freebsd-questions@freebsd.org Subject: lan problem Message-ID: <20030521230637.56870.qmail@web41215.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Can anyone help me solve this problem?? I have two boxes win xp and FreeBSD 4.6 and a DLink 704P router which has built-in nat and dhcp server. Here is a diagram of my setup. ----------------------------- | dsl modem | ------------------------------- | -------------------------------- | router | ------------------------------- | | --------------------------------| |------------------------------ | | ----------------------- ------------------------- | Win XP box | | FBSD4.6 box | ---------------------- ------------------------- I followed the online handbook to setup this box, everything is configured for dhcp. Using the GENERIC kernel. I tried pinging 127.0.0.1 & my nic which had 0% packet loss. But when I try to ping the router I get a message of route to host down. I have Bind running as a caching server . I updated the firmware for a unix sys and I can't get out to the world from this box. The windows box have no problem getting out to the world. On the router I have ports tcp,udp 20-2999 open for both mac address. The router sees both MAC's but the FBSD box can't even access the routers web page. I have another nic card should I install it and put the BSD box in front of the router. Or can anyone help me solve this problem. :D-------------------------------------------------------------------------------------------------:D # ifconfig sis0: flags=8843<UP,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.0.105 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:12:34:56:78 media: Ethernet autoselect (100baseTX <full duplex>) status: active lo0: flags=8049<UP, LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 ------------------------------------------------------------------------------------------------------- # rc.conf blanktime="300" hostname="phaza" ifconfig_sis0="DHCP" defaultrouter="192.168.0.1" named_enable="YES" inetd_enable="YES" kernel_secure_level_enable="YES" kepmap="us.unix" keyrate="normal" linux_enable="YES" and the rest is just set to the default. I had Redhat Linux 7.2 installed before and it work with no problem straight out of the box. I been working on this for a 2 months with no luck. Can anyone help me out. I chose the 4.6 version cause it was all that my local comp had as far as BSD that came with a handbook. Suppressed minds have no Freedom of Choice --------------------------------- Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030521230637.56870.qmail>