Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 25 May 2003 12:13:07 -0400 (EDT)
From:      "hgjsdfkhfjkl" <testing12351@excite.com>
To:        freebsd-current@freebsd.org
Subject:   FreeBSD 5.1 BETA 2 make cvsup-without-gui fails
Message-ID:  <20030525161307.41B4BB703@xmxpita.excite.com>

next in thread | raw e-mail | index | archive | help

after a fresh "kernel developer" install from the x86 5.1 beta 2 ISO, i successfully configured the network and ping a domain name. Then I attempted to install /usr/ports/net/cvsup-without-gui. This fails and repeated attempts provide differing failures. output follows

===>  Extracting for cvsup-without-gui-16.1h
>> Checksum OK for cvsup-snap-16.1h.tar.gz.
===>  Patching for cvsup-without-gui-16.1h
===>   cvsup-without-gui-16.1h depends on file: /usr/local/lib/m3/pkg/tcp/FreeBSD4/libm3tcp.a - not found
===>    Verifying install for /usr/local/lib/m3/pkg/tcp/FreeBSD4/libm3tcp.a in /usr/ports/lang/ezm3
===>  Extracting for ezm3-1.1
>> Checksum OK for ezm3/ezm3-1.1-FreeBSD4-boot.tar.bz2.
>> Checksum OK for ezm3/ezm3-1.1-src.tar.bz2.
===>  Patching for ezm3-1.1
===>  Applying FreeBSD patches for ezm3-1.1
===>   ezm3-1.1 depends on executable: gmake - not found
===>    Verifying install for gmake in /usr/ports/devel/gmake
===>  Extracting for gmake-3.80
>> Checksum OK for make-3.80.tar.bz2.
===>  Patching for gmake-3.80
===>  Applying FreeBSD patches for gmake-3.80
/bin/rm /usr/ports/devel/gmake/work/make-3.80/doc/make.info*
===>   gmake-3.80 depends on shared library: intl.4 - not found
===>    Verifying install for intl.4 in /usr/ports/devel/gettext
===>  Extracting for gettext-0.11.5_1
>> Checksum OK for gettext-0.11.5.tar.gz.
===>  Patching for gettext-0.11.5_1
===>  Applying FreeBSD patches for gettext-0.11.5_1
===>   gettext-0.11.5_1 depends on executable: libtool - not found
===>    Verifying install for libtool in /usr/ports/devel/libtool
>> libtool-1.3.4.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
>> Attempting to fetch from ftp://ftp.gnu.org/gnu/libtool/.

535519 bytes transferred in 4.1 seconds (127.88 kBps)
===>  Extracting for libtool-1.3.4_4
>> Checksum OK for libtool-1.3.4.tar.gz.
===>  Patching for libtool-1.3.4_4
===>  Applying FreeBSD patches for libtool-1.3.4_4
===>  Configuring for libtool-1.3.4_4
creating cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... cc
checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) works... yes
checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether cc accepts -g... yes
checking for ranlib... ranlib
checking host system type... i386-portbld-freebsd5.1
checking build system type... i386-portbld-freebsd5.1
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking for mawk... no
checking for gawk... no
checking for nawk... nawk
updating cache ./config.cache
creating ./config.status
creating Makefile
creating doc/Makefile
creating tests/Makefile
configuring in libltdl
running /bin/sh ./configure  --prefix=/usr/local i386-portbld-freebsd5.1 --enable-ltdl-install --cache-file=.././config.cache --srcdir=.
loading cache .././config.cache
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for working aclocal... missing
checking for working autoconf... missing
checking for working automake... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... (cached) cc
checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) works... yes
checking whether the C compiler (cc -O -pipe -mcpu=pentiumpro ) is a cross-compiler... no
checking whether we are using GNU C... (cached) yes
checking whether cc accepts -g... (cached) yes
checking for working const... yes
checking for inline... inline
checking host system type... i386-portbld-freebsd5.1
checking build system type... i386-portbld-freebsd5.1
checking for ranlib... (cached) ranlib
checking for ld used by GCC... (cached) /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... (cached) yes
checking for BSD-compatible nm... (cached) /usr/bin/nm -B
checking whether ln -s works... (cached) yes
updating cache .././config.cache
loading cache .././config.cache within ltconfig
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... freebsd5.1 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
updating cache .././config.cache
loading cache .././config.cache
checking which extension is used for shared libraries... .so
checking which variable specifies run-time library path... LD_LIBRARY_PATH
checking for objdir... .libs
checking how to run the C preprocessor... cc -E
checking for ANSI C header files... yes
checking for malloc.h... no
checking for memory.h... yes
checking for stdlib.h... yes
checking for stdio.h... yes
checking for ctype.h... yes
checking for dlfcn.h... yes
checking for dl.h... no
checking for dld.h... no
checking for string.h... yes
checking for strchr... yes
checking for strrchr... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for dlopen in -ldl... no
checking for dlopen... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dld_link in -ldld... no
checking for dlerror... yes
checking command to parse /usr/bin/nm -B output... yes
checking for _ prefix in compiled symbols... (cached) no
updating cache .././config.cache
creating ./config.status
creating Makefile
creating config.h
===>  Building for libtool-1.3.4_4
Making all in .
CC="cc" CFLAGS="-O -pipe -mcpu=pentiumpro" CPPFLAGS=""  LD="/usr/bin/ld" LDFLAGS="" LIBS=""  LN_S="ln -s" NM="/usr/bin/nm -B" RANLIB="ranlib"  DLLTOOL="" OBJDUMP="" AS=""  /bin/sh ./ltconfig --cache-file=./config.cache --with-gcc --with-gnu-ld --enable-dlopen --srcdir=.  --output=libtool ./ltmain.sh
loading cache ./config.cache within ltconfig
checking host system type... i386-unknown-freebsdelf5.1
checking for object suffix... o
checking for executable suffix... (cached) no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... freebsdelf5.1 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
checking for dlopen in -ldl... (cached) no
checking for dlopen... (cached) yes
checking for dlfcn.h... (cached) yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
creating libtool
updating cache ./config.cache
CONFIG_FILES=libtoolize CONFIG_HEADERS= ./config.status
creating libtoolize
chmod +x libtoolize
Making all in libltdl
/bin/sh ./libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.     -O -pipe -mcpu=pentiumpro -c ltdl.c
mkdir .libs
cc -DHAVE_CONFIG_H -I. -I. -I. -O -pipe -mcpu=pentiumpro -c ltdl.c  -fPIC -DPIC -o .libs/ltdl.lo
cc -DHAVE_CONFIG_H -I. -I. -I. -O -pipe -mcpu=pentiumpro -c ltdl.c -o ltdl.o >/dev/null 2>&1
mv -f .libs/ltdl.lo ltdl.lo
/bin/sh ./libtool --mode=link cc  -O -pipe -mcpu=pentiumpro  -o libltdl.la -rpath /usr/local/lib -version-info 1:2:1 ltdl.lo  
rm -fr .libs/libltdl.la .libs/libltdl.* .libs/libltdl.*
cc -shared  -Wl,--rpath -Wl,/usr/local/lib  ltdl.lo   -Wl,-soname -Wl,libltdl.so.1 -o .libs/libltdl.so.1
(cd .libs && rm -f libltdl.so && ln -s libltdl.so.1 libltdl.so)
ar cru .libs/libltdl.a  ltdl.o 
ranlib .libs/libltdl.a
creating libltdl.la
(cd .libs && rm -f libltdl.la && ln -s ../libltdl.la libltdl.la)
Making all in doc
cd .  && makeinfo --no-split `echo libtool.texi | sed 's,.*/,,'`
libtool.texi:2906: warning: `(' follows defined name `LTDL_SET_PRELOADED_SYMBOLS' instead of whitespace.
Making all in tests
===>  Installing for libtool-1.3.4_4
Making install in .
/bin/sh ./mkinstalldirs /usr/local/bin
/usr/libexec/ld-elf.so.1: /usr/lib/libc.so.5: Undefined symbol "_nsyylen"
 install  -o root -g wheel -m 555 libtool /usr/local/bin/libtool
 install  -o root -g wheel -m 555 libtoolize /usr/local/bin/libtoolize
/bin/sh ./mkinstalldirs /usr/local/share/libtool
mkdir /usr/local/share/libtool
 install  -o root -g wheel -m 555 config.guess /usr/local/share/libtool/config.guess
 install  -o root -g wheel -m 555 config.sub /usr/local/share/libtool/config.sub
 install  -o root -g wheel -m 555 ltconfig /usr/local/share/libtool/ltconfig
/bin/sh ./mkinstalldirs /usr/local/share/aclocal
 install  -o root -g wheel -m 444 ./libtool.m4 /usr/local/share/aclocal/libtool.m4
/bin/sh ./mkinstalldirs /usr/local/share/libtool
 install  -o root -g wheel -m 444 ./ltmain.sh /usr/local/share/libtool/ltmain.sh
make  install-data-hook
cd libltdl && make local-install-files
rm -rf /usr/local/share/libtool/libltdl
/bin/sh ./../mkinstalldirs /usr/local/share/libtool/libltdl
mkdir /usr/local/share/libtool/libltdl
Making install in libltdl
/bin/sh ./../mkinstalldirs /usr/local/lib
/bin/sh ./libtool  --mode=install /usr/bin/install -c -o root -g wheel libltdl.la /usr/local/lib/libltdl.la
/usr/bin/install -c -o root -g wheel .libs/libltdl.so.1 /usr/local/lib/libltdl.so.1
(cd /usr/local/lib && rm -f libltdl.so && ln -s libltdl.so.1 libltdl.so)
/usr/bin/install -c -o root -g wheel .libs/libltdl.a /usr/local/lib/libltdl.a
ranlib /usr/local/lib/libltdl.a
chmod 644 /usr/local/lib/libltdl.a
/usr/bin/env OBJFORMAT="elf" /sbin/ldconfig -m /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
/bin/sh ./../mkinstalldirs /usr/local/include
 install  -o root -g wheel -m 444 ltdl.h /usr/local/include/ltdl.h
Making install in doc
/bin/sh ../mkinstalldirs /usr/local/info
 install  -o root -g wheel -m 444 ./libtool.info /usr/local/info/libtool.info
 install-info --info-dir=/usr/local/info /usr/local/info/libtool.info
Making install in tests
===>   Generating temporary packing list
===>   Running ldconfig
/sbin/ldconfig -m /usr/local/lib
===>   Registering installation for libtool-1.3.4_4
===>   Returning to build of gettext-0.11.5_1
===>   gettext-0.11.5_1 depends on shared library: iconv.3 - not found
===>    Verifying install for iconv.3 in /usr/ports/converters/libiconv
>> libiconv-1.8.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
>> Attempting to fetch from ftp://ftp.gnu.org/gnu/libiconv/.

3514117 bytes transferred in 36.3 seconds (94.64 kBps)
===>  Extracting for libiconv-1.8_2
>> Checksum OK for libiconv-1.8.tar.gz.
===>  Patching for libiconv-1.8_2
===>  Applying FreeBSD patches for libiconv-1.8_2
===>   libiconv-1.8_2 depends on executable: libtool - found
===>  Configuring for libiconv-1.8_2
configure: WARNING: you should use --build, --host, --target
checking whether make sets ${MAKE}... yes
checking for i386-portbld-freebsd5.1-gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking how to run the C preprocessor... cc -E
checking whether cc needs -traditional... no
checking for ranlib... ranlib
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking how to copy files... cp -p
checking how to make hard links... ln
checking whether ln -s works... yes
checking build system type... i386-portbld-freebsd5.1
checking host system type... i386-portbld-freebsd5.1
checking for AIX... no
checking for minix/config.h... no
checking for strerror in -lcposix... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking how to recognise dependant libraries... pass_all
checking command to parse nm output... ok
checking for dlfcn.h... yes
checking for i386-portbld-freebsd5.1-ranlib... (cached) ranlib
checking for i386-portbld-freebsd5.1-strip... no
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd5.1 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... yes
creating libtool
checking host system type... i386-unknown-freebsdelf5.1
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... freebsdelf5.1 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... no, consider installing GNU libiconv
checking for msgfmt... no
checking for gmsgfmt... :
checking for xgettext... no
checking for msgmerge... no
checking whether NLS is requested... yes
checking for GNU gettext in libc... no
checking for iconv... (cached) no, consider installing GNU libiconv
checking for GNU gettext in libintl... no
checking for locale.h... yes
checking for stdlib.h... yes
checking for mbstate_t... yes
checking for mbrtowc... yes
checking for wcrtomb... yes
checking for mbsinit... yes
checking for setlocale... yes
checking for wchar.h... yes
checking for EILSEQ... yes
checking byte ordering... little endian
configure: creating ./config.status
config.status: creating Makefile
config.status: creating lib/Makefile
config.status: creating src/Makefile
config.status: creating po/Makefile.in
config.status: creating man/Makefile
config.status: creating tests/Makefile
config.status: creating include/iconv.h
config.status: creating lib/config.h
config.status: creating src/config.h
config.status: creating po/POTFILES
config.status: creating po/Makefile
configure: configuring in libcharset
configure: running /bin/sh './configure'  --enable-static --without-libintl-prefix --prefix=/usr/local i386-portbld-freebsd5.1 'CFLAGS=-O -pipe -mcpu=pentiumpro' host_alias=i386-portbld-freebsd5.1 build_alias=i386-portbld-freebsd5.1 target_alias=i386-portbld-freebsd5.1 CC=cc --cache-file=/dev/null --srcdir=.
configure: WARNING: you should use --build, --host, --target
checking whether make sets ${MAKE}... yes
checking for i386-portbld-freebsd5.1-gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking how to run the C preprocessor... cc -E
checking whether cc needs -traditional... no
checking for a BSD compatible install... /usr/bin/install -c -o root -g wheel
checking build system type... i386-portbld-freebsd5.1
checking host system type... i386-portbld-freebsd5.1
checking for AIX... no
checking for minix/config.h... no
checking for POSIXized ISC... no
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... nm
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking command to parse nm output... ok
checking for dlfcn.h... yes
checking for i386-portbld-freebsd5.1-ranlib... no
checking for ranlib... ranlib
checking for i386-portbld-freebsd5.1-strip... no
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd5.1 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... yes
creating libtool
checking host system type... i386-unknown-freebsdelf5.1
checking for ranlib... ranlib
checking whether we are using GNU C... yes
checking for object suffix... o
checking for executable suffix... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... yes
checking if cc supports -fno-rtti -fno-exceptions ... yes
checking if cc static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... freebsdelf5.1 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool
checking for langinfo.h... yes
checking for nl_langinfo... yes
checking for nl_langinfo and CODESET... yes
checking whether we are using the GNU C Library 2.1 or newer... no
checking for stddef.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for setlocale... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating lib/Makefile
config.status: creating config.h
===>  Building for libiconv-1.8_2
builddir="`pwd`"; cd libcharset && make all && make install-lib libdir="$builddir/lib" includedir="$builddir/lib" sysconfdir="$builddir/lib"
if [ ! -d include ] ; then mkdir include ; fi
cp ./include/libcharset.h.in include/libcharset.h
cd lib && make all
/bin/sh ../libtool --mode=compile cc -I. -I. -I.. -I./.. -O -pipe -mcpu=pentiumpro  -DHAVE_CONFIG_H -DLIBDIR=\"/usr/local/libdata\" -c ./localcharset.c
mkdir .libs
cc -I. -I. -I.. -I./.. -O -pipe -mcpu=pentiumpro -DHAVE_CONFIG_H -DLIBDIR=\"/usr/local/libdata\" -c ./localcharset.c  -fPIC -DPIC -o .libs/localcharset.lo
cc -I. -I. -I.. -I./.. -O -pipe -mcpu=pentiumpro -DHAVE_CONFIG_H -DLIBDIR=\"/usr/local/libdata\" -c ./localcharset.c -o localcharset.o >/dev/null 2>&1
mv -f .libs/localcharset.lo localcharset.lo
/bin/sh ../libtool --mode=link cc  -o libcharset.la -rpath /usr/local/lib -version-info 1 -no-undefined localcharset.lo
rm -fr .libs/libcharset.la .libs/libcharset.* .libs/libcharset.*
cc -shared  -Wl,--rpath -Wl,/usr/local/lib  localcharset.lo   -Wl,-soname -Wl,libcharset.so.1 -o .libs/libcharset.so.1
(cd .libs && rm -f libcharset.so && ln -sf libcharset.so.1 libcharset.so)
ar cru .libs/libcharset.a  localcharset.o 
ranlib .libs/libcharset.a
creating libcharset.la
(cd .libs && rm -f libcharset.la && ln -sf ../libcharset.la libcharset.la)
/bin/sh ./config.charset 'i386-portbld-freebsd5.1' > t-charset.alias
mv t-charset.alias charset.alias
sed -e '/^#/d' -e 's/@''PACKAGE''@//g' ./ref-add.sin > t-ref-add.sed
mv t-ref-add.sed ref-add.sed
sed -e '/^#/d' -e 's/@''PACKAGE''@//g' ./ref-del.sin > t-ref-del.sed
mv t-ref-del.sed ref-del.sed
cd lib && make all
cd lib && make install-lib libdir='/usr/ports/converters/libiconv/work/libiconv-1.8/lib' includedir='/usr/ports/converters/libiconv/work/libiconv-1.8/lib' sysconfdir='/usr/ports/converters/libiconv/work/libiconv-1.8/lib'
/bin/sh ./../autoconf/mkinstalldirs /usr/ports/converters/libiconv/work/libiconv-1.8/lib
/bin/sh ../libtool --mode=install install  -o root -g wheel -m 444 libcharset.la /usr/ports/converters/libiconv/work/libiconv-1.8/lib/libcharset.la
install -o root -g wheel -m 444 .libs/libcharset.so.1 /usr/ports/converters/libiconv/work/libiconv-1.8/lib/libcharset.so.1
(cd /usr/ports/converters/libiconv/work/libiconv-1.8/lib && rm -f libcharset.so && ln -sf libcharset.so.1 libcharset.so)
install -o root -g wheel -m 444 .libs/libcharset.a /usr/ports/converters/libiconv/work/libiconv-1.8/lib/libcharset.a
ranlib /usr/ports/converters/libiconv/work/libiconv-1.8/lib/libcharset.a
chmod 644 /usr/ports/converters/libiconv/work/libiconv-1.8/lib/libcharset.a
libtool: install: warning: remember to run `libtool --finish /usr/local/lib'
/bin/sh ./../autoconf/mkinstalldirs /usr/ports/converters/libiconv/work/libiconv-1.8/lib
test -f /usr/ports/converters/libiconv/work/libiconv-1.8/lib/charset.alias && orig=/usr/ports/converters/libiconv/work/libiconv-1.8/lib/charset.alias  || orig=charset.alias;  sed -f ref-add.sed $orig > /usr/ports/converters/libiconv/work/libiconv-1.8/lib/t-charset.alias;  install  -o root -g wheel -m 444 /usr/ports/converters/libiconv/work/libiconv-1.8/lib/t-charset.alias /usr/ports/converters/libiconv/work/libiconv-1.8/lib/charset.alias;  rm -f /usr/ports/converters/libiconv/work/libiconv-1.8/lib/t-charset.alias
/bin/sh ./autoconf/mkinstalldirs /usr/ports/converters/libiconv/work/libiconv-1.8/lib
install  -o root -g wheel -m 444 include/libcharset.h /usr/ports/converters/libiconv/work/libiconv-1.8/lib/libcharset.h
cd lib && make all
/bin/sh ../libtool --mode=compile cc -I. -I. -I../include -I./../include  -O -pipe -mcpu=pentiumpro -c ./iconv.c
../libtool: 1048: Syntax error: ";" unexpected
*** Error code 2

Stop in /usr/ports/converters/libiconv/work/libiconv-1.8/lib.
*** Error code 1

Stop in /usr/ports/converters/libiconv/work/libiconv-1.8.
*** Error code 1

Stop in /usr/ports/converters/libiconv.
*** Error code 1

Stop in /usr/ports/devel/gettext.
*** Error code 1

Stop in /usr/ports/devel/gmake.
*** Error code 1

Stop in /usr/ports/lang/ezm3.
*** Error code 1

Stop in /usr/ports/net/cvsup-without-gui.


_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030525161307.41B4BB703>