Date: Tue, 16 Sep 2003 23:09:57 +0200 From: Arjan van Leeuwen <avleeuwen@piwebs.com> To: current@freebsd.org Subject: ATAng hangs with kernel from september 15 Message-ID: <200309162309.57465.avleeuwen@piwebs.com>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_lw3Z/qSLdkshTAq
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
If I start my kernel from september 15, my computer hangs after this message:
atapci0: <VIA 82C686B UDMA100 controller> port 0xa400-0xa40f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
A kernel from september 7 works normally. A normal dmesg is attached. Anything
I can try?
Arjan
--Boundary-00=_lw3Z/qSLdkshTAq
Content-Type: text/plain;
charset="us-ascii";
name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Sun Sep 7 01:04:52 CEST 2003
root@vincent.piwebs.com:/usr/obj/usr/src/sys/AMD760
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc0780000.
Preloaded elf module "/boot/kernel.old/sbp.ko" at 0xc07801f8.
Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc07802a4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2000+ (1668.71-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 513282048 (489 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <761686 AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fdeb0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 5
pcib0: slot 7 INTD is routed to irq 5
pcib0: slot 8 INTA is routed to irq 5
pcib0: slot 11 INTA is routed to irq 5
pcib0: slot 13 INTA is routed to irq 11
pcib0: slot 15 INTA is routed to irq 11
agp0: <AMD 761 host to AGP bridge> port 0xa000-0xa003 mem 0xf6000000-0xf6000fff,0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci_cfgintr: 1:5 INTA BIOS irq 10
drm0: <ATI Radeon QD R100> port 0x9000-0x90ff mem 0xf5000000-0xf507ffff,0xe8000000-0xefffffff irq 10 at device 5.0 on pci1
info: [drm] AGP at 0xf0000000 64MB
info: [drm] Initialized radeon 1.9.0 20020828 on minor 0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xa400-0xa40f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 5 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xac00-0xac1f irq 5 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
fwohci0: <VIA VT6306> port 0xb000-0xb07f mem 0xf6001000-0xf60017ff irq 5 at device 8.0 on pci0
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:1c:f1:57
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S100, max_rec 2 bytes.
fwohci0: max_rec 2 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:1c:f1:57
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcm0: <Creative EMU10K1> port 0xb400-0xb41f irq 5 at device 11.0 on pci0
pcm0: <TriTech TR28023 AC97 Codec>
sym0: <810a> port 0xbc00-0xbcff mem 0xf6002000-0xf60020ff irq 11 at device 13.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
rl0: <RealTek 8139 10/100BaseTX, rev. B> port 0xc000-0xc0ff mem 0xf6003000-0xf60030ff irq 11 at device 15.0 on pci0
rl0: Ethernet address: 00:10:a7:01:65:54
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1668713439 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk ad0 dp=0xc41e4470
ad0: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata0-master UDMA100
acd0: DVDROM <CREATIVEDVD5240E-1> at ata1-master WDMA2
Waiting 2 seconds for SCSI devices to settle
cd1 at ata1 bus 0 target 0 lun 0
cd1: <CREATIVE DVD5240E-1 1.30> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: cd present [1633955956 x 845479936 byte records]
Mounting root from ufs:/dev/ad0s1a
cd0 at sym0 bus 0 target 2 lun 0
cd0: <PLEXTOR CD-R PX-R412C 1.07> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
drm0: [MPSAFE]
--Boundary-00=_lw3Z/qSLdkshTAq--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309162309.57465.avleeuwen>