Date: Sun, 21 Sep 2003 21:23:21 -0400 (EDT) From: Tuc <tuc@ttsg.com> To: freebsd-alpha@freebsd.org Subject: Winning the 4/266 battle! Message-ID: <200309220123.h8M1NLSU026668@himinbjorg.tucs-beachin-obx-house.com>
next in thread | raw e-mail | index | archive | help
Hi,
Major breakthrough.... I did some controller setting changes,
and it cooperated! I loaded a base Developer system on it, and configured
ethernet, and its up!
I pulled the ports off, and am compiling cvsup, and compiling, and
compiling, and .... YEESH! Seems like only 1 CPU is running. I can't see
anything that any of the other CPU's started :
Unrecognized boot flag '0'.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Fri Apr 4 03:45:38 GMT 2003
root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
AlphaServer 1000/1000A
AlphaServer 1000 4/266, 266MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=2
OSF PAL rev: 0x100000002012e
real memory = 199303168 (194632K bytes)
avail memory = 186458112 (182088K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007f8000.
md0: Malloc disk
pci0: <PCI bus> on pcib0
sym0: <810> port 0x10000-0x100ff mem 0x82010000-0x820100ff irq 12 at device 6.0
on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: interrupting at APECS irq 12
isab0: <Intel 82375EB PCI-EISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21040 Ethernet> port 0x10180-0x101ff mem 0x82010180-0x820101ff irq 0 at device 11.0 on pci0
de0: interrupting at APECS irq 0
de0: DEC 21040 [10Mb/s] pass 2.4
de0: address 00:00:f8:22:34:f8
pci0: <VGA-compatible display device> at 12.0 irq 4
mlx0: <Mylex version 2 RAID interface> port 0x10100-0x1017f mem 0x82010100-0x820
1017f irq 8 at device 13.0 on pci0
mlx0: interrupting at APECS irq 8
mlx0: DAC960P/PD, 1 channel, firmware 2.70-0-00, 4MB RAM
mlxd0: <Mylex System Drive> on mlx0
mlxd0: 8182MB (16756736 sectors) RAID 5 (online)
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd0: interrupting at ISA irq 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: interrupting at ISA irq 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio0: interrupting at ISA irq 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
Timecounter "alpha" frequency 266681192 Hz
Waiting 15 seconds for SCSI devices to settle
de0: enabling 10baseT port
sa0 at sym0 bus 0 target 2 lun 0
sa0: <DEC TLZ07 (C)DEC 553B> Removable Sequential Access SCSI-2 device
sa0: 7.812MB/s transfers (7.812MHz, offset 8)
Mounting root from ufs:/dev/mlxd0a
cd0 at sym0 bus 0 target 4 lun 0
cd0: <DEC RRD45 (C) DEC 1645> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 8)
cd0: cd present [426632 x 512 byte records]
How do I get SMP running? I'll do a CVSUP of the ports and of the
source as soon as I can.. What can/should I be doing otherwise?!
Thanks, Tuc/TTSG Internet Services, Inc.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200309220123.h8M1NLSU026668>