Date: Wed, 15 Oct 2003 23:16:29 -0500 From: Vulpes Velox <kitbsdlist2@HotPOP.com> To: questions@freebsd.org Subject: cvsup problem on router Message-ID: <20031015231629.7e90d1c1.kitbsdlist2@HotPOP.com>
next in thread | raw e-mail | index | archive | help
How do I go about cvsuping on a router?
Yes, I know about the -A switch... here is what happens... yeah, I am probally
missing something annoyingly obvious, but I can't figure it out what so ever...
any ways, much thanks in advance =)
here is the command I try...
cdm-207-33-7-sunv# cvsup -A <ip-address-omitted> ports
Cannot get IP address of my own host -- is its hostname correct?
cdm-207-33-7-sunv#
here is what ifconfig looks like
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::290:27ff:fe14:d169%fxp0 prefixlen 64 scopeid 0x1
inet <ip-address-omitted> netmask 0xfffff000 broadcast 68.109.63.255
ether 00:90:27:14:d1:69
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::290:27ff:fe25:cea0%fxp1 prefixlen 64 scopeid 0x2
ether 00:90:27:25:ce:a0
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
here is what the supfile looks like...
*default tag=.
*default host=cvsup4.FreeBSD.org
*default prefix=/usr
*default base=/usr/local/etc/cvsup
*default release=cvs delete use-rel-suffix compress
ports-all release=cvs
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031015231629.7e90d1c1.kitbsdlist2>