Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 3 Nov 2003 19:01:26 -0500
From:      Adam Weinberger <adamw@FreeBSD.org>
To:        Vivek Khera <khera@kcilink.com>
Cc:        ports@freebsd.org
Subject:   Re: ports containing perl modules go into /lib instead of /usr/local/lib
Message-ID:  <20031104000126.GD96543@toxic.magnesium.net>
In-Reply-To: <16294.34255.356451.725973@yertle.int.kciLink.com>
References:  <16294.34255.356451.725973@yertle.int.kciLink.com>

next in thread | previous in thread | raw e-mail | index | archive | help
>> (11.03.2003 @ 1143 PST): Vivek Khera said, in 2.9K: <<
> For a while now, it seems that ports containing perl modules (such as
> ImageMagick, rrdtool, and net-snmp to name a few) install the perl
> components into /lib/perl5 instead of /usr/local/lib/perl5 like they
> should (and as the pkg-plist expects).
> 
> Needless to say, this is bad. :-(
> 
> Anyhow, has anyone else experienced this?  I'm running a 4.8-STABLE
> from mid-July, but it also happens on my recently upgraded
> 4.9-RELEASE.  Both boxes are running perl 5.6.1 from ports, with the
> appropriate settings in the /etc/make.conf file (ie, I ran "use.perl
> port"; /usr/bin/perl -v says "5.6.1")

You're not the only one with this problem. A friend of mine has this
problem on his server, which runs 4.8-STABLE from around August, and
perl 5.8.1. He noticed the problem with irssi installing stuff into
/lib. Sure enough, ${prefix} was being emptied, for some bizarre reason.

I have no idea why this is, and I look forward to hearing input from
others on this list.

But, you're not alone in experiencing this.

# Adam


> 
> I tried tracking the problem for the rrdtool build.  When the port is
> built, it goes something like this:
> 
> cd perl-shared && /usr/bin/perl Makefile.PL  
> Checking if your kit is complete...
> Looks good
> Writing Makefile for RRDs
> cd perl-shared && gmake
> 
>  .. then goes on to build the module and a bunch of other stuff.  when
>     we get around to the install phase ...
> 
> cd perl-shared && gmake install
> gmake[3]: Entering directory `/var/tmp/u/sources/usr/ports/net/rrdtool/work/rrdt
> ool-1.0.45/perl-shared'
> Installing /lib/perl5/site_perl/5.6.1/mach/auto/RRDs/RRDs.so
> Installing /lib/perl5/site_perl/5.6.1/mach/auto/RRDs/RRDs.bs
> Files found in blib/arch: installing files in blib/lib into architecture depende
> nt library tree
> Installing /lib/perl5/site_perl/5.6.1/mach/ntmake.pl
> Installing /lib/perl5/site_perl/5.6.1/mach/RRDs.pm
> Writing /lib/perl5/site_perl/5.6.1/mach/auto/RRDs/.packlist
> Appending installation info to /usr/local/lib/perl5/5.6.1/mach/perllocal.pod
> 
> 
> If I go to that perl-shared directory and type "/usr/bin/perl
> Makefile.PL" the resulting Makefile is significanly different:
> 
> 82c82
> < INSTALLSITELIB = $(PREFIX)/lib/perl5/site_perl/5.6.1
> ---
> > INSTALLSITELIB = $(SITEPREFIX)/lib/perl5/site_perl/5.6.1
> 88c88
> < INSTALLSITEARCH = $(PREFIX)/lib/perl5/site_perl/5.6.1/mach
> ---
> > INSTALLSITEARCH = $(SITEPREFIX)/lib/perl5/site_perl/5.6.1/mach
> 92c92
> < INSTALLBIN = $(PREFIX)/bin
> ---
> > INSTALLBIN = $(PERLPREFIX)/bin
> 98c98
> < INSTALLSCRIPT = $(PREFIX)/bin
> ---
> > INSTALLSCRIPT = $(PERLPREFIX)/bin
> 100c100
> < INSTALLMAN1DIR = $(PREFIX)/man/man1
> ---
> > INSTALLMAN1DIR = $(PERLPREFIX)/man/man1
> 106c106
> < INSTALLMAN3DIR = $(PREFIX)/lib/perl5/5.6.1/man/man3
> ---
> > INSTALLMAN3DIR = $(PERLPREFIX)/lib/perl5/5.6.1/man/man3
> 
> 
> Note also that "PREFIX" is *empty* in the resulting Makefiles, which
> is why the modules are installed in /lib rather than /usr/local/lib.
> 
> What could cause this to generate such significantly different output?
> I don't really see anything in my environment that would cause perl to
> behave differently.
> 
> Right now I just go back into those build directories and re-run the
> build + install to get the bits installed, but this is a painful
> workaround.
> 
> _______________________________________________
> freebsd-ports@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ports
> To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org"
>> end of "ports containing perl modules go into /lib instead of /usr/local/lib" from Vivek Khera <<


--
Adam Weinberger
vectors.cx	>>  adam@vectors.cx	>>  http://www.vectors.cx
magnesium.net	<<  adamw@magnesium.net	<<  http://www.magnesium.net/~adamw
FreeBSD		>>  adamw@FreeBSD.org	>>  http://people.freebsd.org/~adamw
#vim:set ts=8: 8-char tabs prevent tooth decay.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031104000126.GD96543>