Date: Fri, 2 Jan 2004 14:19:13 +0100 (CET) From: Lukas Ertl <l.ertl@univie.ac.at> To: "M. Warner Losh" <imp@bsdimp.com> Cc: hackers@freebsd.org Subject: Re: Power Patches Message-ID: <20040102141109.N639@korben.in.tern> In-Reply-To: <20040101.233009.58826299.imp@bsdimp.com> References: <20040101.233009.58826299.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 1 Jan 2004, M. Warner Losh wrote: > You should try it if: > > 1) You are using hw.pci.unsupported_io=1. Turn it off and use > these patches. Let me know if it doesn't. Typically it > appears that this helps people hitting the double > allocation problem. > 2) You have suspend/resume issues. This should make them suck > less if they are with a specific device (not ata). Hi Warner, I experienced the following with this patch: *) I still need to set hw.pci.allow_unsupported_io_range="1", otherwise cbb0 wouldn't attach: cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 4 at device 0.0 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 5 at device 0.1 on pci2 cbb0: Could not map register memory device_probe_and_attach: cbb0 attach returned 12 *) My UHCI controller finally survives suspend/resume - YAY! :-) But there is still something bogus with EHCI: *) boot - kldload usb -> ehci0 fails to attach. *) boot - suspend/resume - kldload usb -> ehci0 attaches successfully Failing looks like this: uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 4 at device 29.0 on pci0 uhci0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 uhci1: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 6 at device 29.2 on pci0 uhci2: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 11 at device 29.7 on pci0 ehci0: Bus reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version ff.ff usb3: wrong number of companions (15 != 3) ehci0: USB init failed err=13 device_probe_and_attach: ehci0 attach returned 5 *) I'm seeing some "Failed to set ACPI power state" on boot, dmesg is attached. *) Otherwise, everything seems fine. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #80: Fri Jan 2 13:45:19 CET 2004 le@korben:/usr/obj/usr/src/sys/KORBEN Preloaded elf kernel "/boot/kernel/kernel" at 0xc0852000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc085226c. Preloaded acpi_dsdt "/boot/DSDT.aml" at 0xc08522bc. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0852300. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) M processor 1300MHz (598.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 536215552 (511 MB) avail memory = 514973696 (491 MB) Pentium Pro MTRR support enabled ACPI: DSDT was overridden. ACPI-0374: *** Info: Table [DSDT] replaced by host OS npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1R > on motherboard acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0 pcibios: BIOS version 2.10 Using $PIR table, 15 entries at 0xc00fdea0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0:0:0: setting power state D0 pci0:29:0: setting power state D0 pcib0: slot 29 INTA is routed to irq 4 pci0:29:1: setting power state D0 pcib0: slot 29 INTB is routed to irq 9 pci0:29:2: setting power state D0 pcib0: slot 29 INTC is routed to irq 6 pci0:29:7: setting power state D0 pcib0: slot 29 INTD is routed to irq 11 pci0:31:0: setting power state D0 pci0:31:1: setting power state D0 pci0:31:3: setting power state D0 pcib0: slot 31 INTB is routed to irq 5 pci0:31:5: setting power state D0 pcib0: slot 31 INTB is routed to irq 5 pci0:31:6: setting power state D0 pcib0: slot 31 INTB is routed to irq 5 agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Bus reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1:0:0: setting power state D0 pcib1: slot 0 INTA is routed to irq 4 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0:29:0: setting power state D3 pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0:29:1: setting power state D3 pci0: <serial bus, USB> at device 29.2 (no driver attached) pci0:29:2: setting power state D3 pci0: <serial bus, USB> at device 29.7 (no driver attached) pci0:29:7: setting power state D3 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 start (b0000000) < sc->membase (c0200000) start (b0000000) < sc->pmembase (e8000000) pcib2: slot 0 INTA is routed to irq 4 start (b1000000) < sc->membase (c0200000) start (b1000000) < sc->pmembase (e8000000) pcib2: slot 0 INTB is routed to irq 5 pci2:2:0: setting power state D0 pcib2: slot 2 INTA is routed to irq 6 pci2:8:0: setting power state D0 pcib2: slot 8 INTA is routed to irq 10 cbb0: <TI1520 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 4 at device 0.0 on pci2 cbb0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: <TI1520 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 5 at device 0.1 on pci2 cbb1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] pci2: <network> at device 2.0 (no driver attached) pci2: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER pci2:2:0: setting power state D3 fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xc0201000-0xc0201fff irq 10 at device 8.0 on pci2 fxp0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0201000 fxp0: Ethernet address 00:0d:60:38:76:78 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f at device 31.1 on pci0 atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0:31:3: setting power state D3 pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xc0000800-0xc00008ff,0xc0000c00-0xc0000dff irq 5 at device 31.5 on pci0 pcm0: Bus reserved 0x200 bytes for rid 0x18 type 3 at 0xc0000c00 pcm0: Bus reserved 0x100 bytes for rid 0x1c type 3 at 0xc0000800 pcm0: <Analog Devices AD1981B AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) pci0: Failed to set ACPI power state D3 on (null): AE_BAD_PARAMETER pci0:31:6: setting power state D3 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 598062117 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% system power profile changed to 'economy' start (88000000) < sc->membase (c0200000) end (ffffffff) > sc->memlimit (cfffffff) start (88000000) < sc->pmembase (e8000000) end (ffffffff) > sc->pmemlimit (cfffffff) start (88000000) < sc->membase (c0200000) end (ffffffff) > sc->memlimit (cfffffff) start (88000000) < sc->pmembase (e8000000) end (ffffffff) > sc->pmemlimit (cfffffff) ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 5 at device 0.0 on cardbus1 start (88000000) < sc->membase (c0200000) start (88000000) < sc->pmembase (e8000000) ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 802.11 address: 00:09:5b:41:8d:ac GEOM: create disk ad0 dp=0xc456b660 ad0: 57231MB <TOSHIBA MK6021GAS> [116280/16/63] at ata0-master UDMA100 acd0: CDRW <TOSHIBA DVD-ROM SD-R9012> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s2a regards, le -- Lukas Ertl eMail: l.ertl@univie.ac.at UNIX Systemadministrator Tel.: (+43 1) 4277-14073 Vienna University Computer Center Fax.: (+43 1) 4277-9140 University of Vienna http://mailbox.univie.ac.at/~le/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040102141109.N639>