Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 5 Feb 2004 15:37:26 +0100
From:      Bernd Walter <ticso@cicely12.cicely.de>
To:        "Daniel O'Connor" <doconnor@gsoft.com.au>
Cc:        FreeBSD current users <current@freebsd.org>
Subject:   Re: EHCI USB MFC?
Message-ID:  <20040205143724.GB44313@cicely12.cicely.de>
In-Reply-To: <200402051839.43204.doconnor@gsoft.com.au>
References:  <Pine.BSF.4.21.0402042239310.8277-100000@InterJet.elischer.org> <200402051839.43204.doconnor@gsoft.com.au>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 05, 2004 at 06:39:42PM +1030, Daniel O'Connor wrote:
> On Thursday 05 February 2004 17:10, Julian Elischer wrote:
> > > > if not I will give it a try..
> > >
> > > Can it be fixed to work in -current first :-)
> >
> > huh? seemed to work for me when I tested it a few months ago..

There are conditions were EHCI don't work - in the same way as there
are still conditions were OHCI/UHCI don't work.
But it's not unsusual for say OHCI to work and EHCI not on the same
chip.
On the other hand EHCI is not complete - e.g. hub support is missing
and high speed hubs are quite common today, which is the may reason to
not have it in GENERIC.

Porting to -stable should basicly just MFC'ing the -current version and
taking care about the lockmgr usage - at least if lockmgr was not
already MFC'ed.
That said - I don't have stable test machine with required USB hardware
here, so it's up to someone else to do :)

> Well, my trackball works fine, but last time I tried a umass device it worked 
> OK on a USB1 port but wouldn't talk on a USB2.0 port :(
> 
> My pocket PC is very unreliable when connecting to my new laptop (USB2.0) but 
> it was much more solid with my old (USB1.1) one.. 

PR?

> That said, I guess you can always disable ehci if it's a problem :)

You don't have to enable ehci if its a problem :)

-- 
B.Walter                   BWCT                http://www.bwct.de
ticso@bwct.de                                  info@bwct.de



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040205143724.GB44313>