Date: Thu, 23 Sep 2004 10:34:15 -0700 (PDT) From: Doug White <dwhite@gumbysoft.com> To: Evren Yurtesen <yurtesen@ispro.net.tr> Cc: freebsd-current@freebsd.org Subject: Re: panic: sorele Message-ID: <20040923103227.C43015@carver.gumbysoft.com> In-Reply-To: <415359EF.3050008@ispro.net.tr> References: <415359EF.3050008@ispro.net.tr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 23 Sep 2004, Evren Yurtesen wrote: > Does anybody know what is panic: sorele? :) This panic is triggered if a socket's reference count is reduced below 0. This usually indicates corruption of the socket structure. If you got a crashdump it would be interesting to inspect the structure and see if its filled with 0xdeadc0de, which indicates reuse of a freed socket structure. Can you do anything to reproduce this? > FreeBSD proxy.ispro.net.tr 5.3-BETA4 FreeBSD 5.3-BETA4 #0: Fri Sep 17 > 19:17:14 EEST 2004 > toor@proxy.ispro.net.tr:/usr/obj/usr/src/sys/PROXY i386 > > I just got this error and the machine got frozen... > > panic: sorele > cpuid = 1 > boot() called on cpu#1 > Uptime: 5d19h48m4s > > I wonder if it might be some hardware problem or ? > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.3-BETA4 #0: Fri Sep 17 19:17:14 EEST 2004 > toor@proxy.ispro.net.tr:/usr/obj/usr/src/sys/PROXY > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3059.02-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 3216179200 (3067 MB) > avail memory = 3149369344 (3003 MB) > ACPI APIC Table: <A M I OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > module_register_init: MOD_LOAD (splash_bmp, 0xc0788810, 0) error 2 > acpi0: <A M I OEMRSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xefe0-0xefe7 mem > 0xfe780000-0xfe7fffff,0xf0000000-0xf7ffffff irq 16 at device 2.0 on pci0 > agp0: detected 3964k stolen memory > agp0: aperture size is 128M > pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xdf00-0xdf3f mem > 0xfe5ff000-0xfe5fffff irq 20 at device 8.0 on pci1 > miibus0: <MII bus> on fxp0 > inphy0: <i82562ET 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: Ethernet address: 00:0e:a6:0a:51:36 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 SATA150 controller> port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > pmtimer0 on isa0 > fdc0: ready for input in output > fdc0: cmd 3 failed at out byte 1 of 3 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 10.000 msec > ipfw2 initialized, divert disabled, rule-based forwarding enabled, > default to accept, logging disabled > ad0: 76319MB <ST380011A/3.06> [155061/16/63] at ata0-master UDMA100 > ad2: 114473MB <ST3120026AS/3.05> [232581/16/63] at ata1-master SATA150 > ad3: 114473MB <ST3120026AS/3.05> [232581/16/63] at ata1-slave SATA150 > SMP: AP CPU #1 Launched! > Mounting root from ufs:/dev/ad0s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040923103227.C43015>