Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 12 Apr 2005 22:13:50 +0200
From:      Victor Balada Diaz <victor@bsdes.net>
To:        freebsd-alpha@FreeBSD.org
Subject:   MiataGL doesn't boot in 5.4-RC2
Message-ID:  <20050412201350.GD602@pato.euesrg02.net>

next in thread | raw e-mail | index | archive | help
When i try to boot the bootonly cd of FreeBSD 5.4-RC2 it hangs forever after
probing the isp(4) card.

>>>show conf

Firmware
SRM Console:	V7.2-1		Mar  6 2000 14:47:02
ARC Console:	5.70
PALcode:	OpenVMS PALcode V1.20-16, Tru64 UNIX PALcode V1.22-18
SROM Version:   v5.90

Processor
DECchip (tm) 21164A-2	Pass   500 MHz  96 KBytes SCache 
2 MB BCache
PYXIS ASIC Pass 257

MEMORY


Memory Size = 128Mb

Bank      Size/Sets   Base Addr
------    ----------  ---------
   0        128Mb      00000000


BCache Size = 2Mb

Tested Memory =  128Mbytes

PCI Bus 
     Bus 00  Slot 03: Digital Semiconductor 21143 Network Controller
                                   ewa0.0.0.3.0          08-00-2B-86-35-88   

     Bus 00  Slot 07: Cypress PCI Peripheral Controller
                                                                             

     Bus 00  Slot 07: Function 1: PCI IDE  
                                                                             

     Bus 00  Slot 07: Function 2: PCI IDE  
                                                                             
                                   dkb0.0.0.207.0         TOSHIBA CD-ROM XM-63

     Bus 00  Slot 07: PCI USB
     Bus 00  Slot 11: Digital TGA2 Graphics Controller
                                                                             

     Bus 00  Slot 20: DECchip 21152 PCI to PCI Bridge
       Bus 01  Slot 04: ISP1040 Scsi Controller
                                   pkc0.7.0.1004.0       SCSI Bus ID 7       
                                   dkc0.0.0.1004.0        RZ2CC-KB            
                                   dkc100.1.0.1004.0      SEAGATE ST39175LW   

ISA
Slot	Device	Name	Type		Enabled	BaseAddr	IRQ	DMA
0
	0	MOUSE	Embedded	Yes	60		12
	1	KBD	Embedded	Yes	60		1
	2	COM1	Embedded	Yes	3f8		4
	3	COM2	Embedded	Yes	2f8		3
	4	LPT1	Embedded	Yes	3bc		7
	5	FLOPPY	Embedded	Yes	3f0		6	2
	6	EIDE	Embedded	Yes	1f0		14	
						3f6		15	
						170
						376
	7	ES1888	Embedded	Yes	220		5	1
									5
	8	USB	Embedded	Yes	10


dmesg:

OK boot -v -h
Entering /boot/kernel/kernel at 0xfffffc0000345de0...
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC2 #0: Sun Apr 10 21:51:00 UTC 2005
    root@ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e1c000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e1c0e0.
Digital Personal Workstation (Miata)
Digital Personal WorkStation 500au, 500MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=0 extensions=0x1<BWX>
OSF PAL rev: 0x1000000020116
real memory  = 132276224 (126 MB)
Physical memory chunk(s):
0x00e3c000 - 0x07df9fff, 117170176 bytes (14303 pages)
avail memory = 115458048 (110 MB)
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
        map[10]: type 4, range 32, base 00009000, size  7, enabled
        map[14]: type 1, range 32, base 80159000, size  7, enabled
found-> vendor=0x1011, dev=0x0019, revid=0x30
        bus=0, slot=3, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0047, statreg=0x0280, cachelnsz=16 (dwords)
        lattimer=0xff (7650 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
        intpin=a, irq=0
found-> vendor=0x1080, dev=0xc693, revid=0x00
        bus=0, slot=7, func=0
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        map[20]: type 4, range 32, base 000090a0, size  4, enabled
found-> vendor=0x1080, dev=0xc693, revid=0x00
        bus=0, slot=7, func=1
        class=01-01-80, hdrtype=0x00, mfdev=1
        cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=238
        map[10]: type 4, range 32, base 00000170, size  3, enabled
        map[14]: type 4, range 32, base 00000374, size  2, enabled
        map[20]: type 1, range 32, base 80140000, size 16, memory disabled
found-> vendor=0x1080, dev=0xc693, revid=0x00
        bus=0, slot=7, func=2
        class=01-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0045, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=239
        map[10]: type 1, range 32, base 80158000, size 12, enabled
found-> vendor=0x1080, dev=0xc693, revid=0x00
        bus=0, slot=7, func=3
        class=0c-03-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords)
        lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=234
        map[10]: type 3, range 32, base 90000000, size 25, enabled
found-> vendor=0x1011, dev=0x000d, revid=0x22
        bus=0, slot=11, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0047, statreg=0x8280, cachelnsz=0 (dwords)
        lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x40 (16000 ns)
        intpin=a, irq=4
found-> vendor=0x1011, dev=0x0024, revid=0x03
        bus=0, slot=20, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0107, statreg=0x0290, cachelnsz=16 (dwords)
        lattimer=0xff (7650 ns), mingnt=0x20 (8000 ns), maxlat=0x00 (0 ns)
dc0: <Intel 21143 10/100BaseTX> port 0x9000-0x907f mem 0x80159000-0x8015907f ir0
dc0: Reserved 0x80 bytes for rid 0x10 type 4 at 0x9000
miibus0: <MII bus> on dc0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 08:00:2b:86:35:88
dc0: if_start running deferred for Giant
dc0: interrupting at CIA irq 0
dc0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Cypress 82C693 ATA controller> port 0x90a0-0x90af,0x376,0x170-0x177,00
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x90a0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x04 lsb=0xff msb=0xff
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atapci1: <GENERIC ATA controller> port 0x377-0x37a,0x170-0x177 mem 0x80140000-00
atapci1: failed: rid 0x20 is memory, requested 4
atapci1: unable to map interrupt
ata2: channel #0 on atapci1
device_attach: ata2 attach returned 6
ohci0: <OHCI (generic) USB controller> mem 0x80158000-0x80158fff irq 234 at dev0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80158000
ohci0: (New OHCI DeviceId=0xc6931080)
ohci0: interrupting at ISA irq 10
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1080) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <display, VGA> at device 11.0 (no driver attached)
pcib1: <PCI-PCI bridge> at device 20.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   0
pcib1:   I/O decode        0x8000-0x8fff
pcib1:   memory decode     0x80000000-0x800fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
        map[10]: type 4, range 32, base 00008000, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x8000-0x80ff
        map[14]: type 1, range 32, base 80010000, size 12, enabled
pcib1: device (null) requested decoded memory range 0x80010000-0x80010fff
found-> vendor=0x1077, dev=0x1020, revid=0x05
        bus=1, slot=4, func=0
        class=01-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0047, statreg=0x0200, cachelnsz=16 (dwords)
        lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=3
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.9
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem 0x80010000
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x80010000
isp0: using Memory space register mapping
isp0: interrupting at CIA irq 3
isp0: [GIANT-LOCKED]
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0

-- 
La prueba mas fehaciente de que existe vida inteligente en otros
planetas, es que no han intentado contactar con nosotros. 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050412201350.GD602>