Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 1 Feb 2006 11:42:49 +0100
From:      Holm Tiffe <holm@freibergnet.de>
To:        Johan =?iso-8859-1?Q?Str=F6m?= <johan@stromnet.org>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: SCSI device timeout
Message-ID:  <20060201104249.GA1263@pegasus.freiberg-net.de>
In-Reply-To: <938E255B-24CC-4844-B077-A623795300D9@stromnet.org>
References:  <001c01c62666$76b26400$0102a8c0@bogomip> <20060201095718.GA1025@pegasus.freiberg-net.de> <938E255B-24CC-4844-B077-A623795300D9@stromnet.org>

next in thread | previous in thread | raw e-mail | index | archive | help
Johan Ström wrote:

> On 1 feb 2006, at 10.57, Holm Tiffe wrote:
> 
> >Derkjan de Haan wrote:
> >
> >>All,
> >>
> >>Today, after a cvsup (RELENG_6) and a rebuild of kernel and world, my
> >>system no longer boots. It hangs on
> >>
> >>Waiting 5 seconds for SCSI devices to settle
> >>
> >>Booting from the previous kernel allows my system to boot again.  
> >>Please let
> >>me know if I can do anything to diagnose further.
> >>
> >>
> >>regards,
> >>
> >>Derkjan de Haan
> >>
> >
> >I have exactly the same problem here on a ASUS A7V333 Motherboard and
> >an Adaptec 3960D SCSI Controller.
> >
> >The problem seems to be in the acpi interrupt routing, I've updated
> >the mainboard Bios to the last available version in the meantime
> >(1018.004 Beta) with no luck. Disabling acpi completly helps booting
> >the machine again..
> 
> Hi
> 
> I got one of those motherboards.. however no SCSI card but a promise.  
> Ive hade huge problems with it (check out the "Page fault, GEOM  
> problem??" thread). The problems i had was random crashes and very  
> bad speed to the disks.
> It was solved by throwing the mobo out with a new one with nforce2  
> chipset... Got great speeds now and haven't had a crash since i  
> installed it (roughly a week now).
> 
> Johan Ström
> johan@stromnet.org
> http://www.stromnet.org/
> 

No Johan, my A7V333 has no problem, it runs for arounrd 2 years now as my
personal workstation here at work 24/7.

I've cvsupped RELENG_6 again for an hour or so and the now build kernel
runs flawlessly. There are some new patches in the pci code.

Regards,

Holm
-- 
L&P::Kommunikation GbR          Holm Tiffe  * Administration, Development
FreibergNet.de Internet Systems                     phone +49 3731 419010
Bereich Server & Technik                             fax +49 3731 4196026 
D-09599 Freiberg * Am St. Niclas Schacht 13     http://www.freibergnet.de




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060201104249.GA1263>