Date: Fri, 23 Jun 2006 22:51:15 +1000 From: Geoff Roberts <robertsg@westnet.com.au> To: freebsd-acpi@freebsd.org Subject: acpi: bad write to port Message-ID: <200606232251.15593.robertsg@westnet.com.au>
next in thread | raw e-mail | index | archive | help
--Boundary-00=_DP+mEJdOd56bA4e
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I'm not sure if this is the correct list, please let me know if it
belongs on another list.
Since upgrading from 6.0 to the latest RELENG_6 branch the following
message appears every 10 seconds (exactly):
Jun 22 15:00:06 emmapc kernel: acpi: bad write to port 0x070 (8), val
0x59
Jun 22 15:00:06 emmapc kernel: acpi: bad read from port 0x071 (8)
I am using a Gigabyte GA60MM7E Rev 2.0 motherboard. It also has a PCI
SATA controller using a Si 3112 chip, a RealTek network card and a
Netgear WG311 wireless card.
I've included the output of dmesg and pciconf -lv
Any idea as to what might be causing this? Please let me know if there
is some more information required.
Kind regards,
Geoff
--
Geoff Roberts
--Boundary-00=_DP+mEJdOd56bA4e
Content-Type: text/plain;
charset="us-ascii";
name="pciDevices.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="pciDevices.txt"
agp0@pci0:0:0: class=0x060000 card=0x11308086 chip=0x11308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82815/EM/EP/P 815/EM/EP/P (Solano) Host to I/O Hub Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x11318086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82815/EM/EP/P 815/EM/EP/P (Solano) PCI to AGP Bridge'
class = bridge
subclass = PCI-PCI
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24408086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA (ICH2) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci1@pci0:31:1: class=0x010180 card=0x00000000 chip=0x244b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA (ICH2) UltraATA/100 IDE Controller'
class = mass storage
subclass = ATA
uhci0@pci0:31:2: class=0x0c0300 card=0x00000000 chip=0x24428086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:31:4: class=0x0c0300 card=0x00000000 chip=0x24448086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM (ICH2/ICH2-M) USB Universal Host Controller'
class = serial bus
subclass = USB
pcm0@pci0:31:5: class=0x040100 card=0x76008384 chip=0x24458086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801BA/BAM (ICH2/ICH2-M) AC'97 Audio Controller'
class = multimedia
subclass = audio
none0@pci1:0:0: class=0x030000 card=0x00000000 chip=0x002d10de rev=0x15 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'NV5 TNT2 Model 64 / TNT2 Model 64 Pro'
class = display
subclass = VGA
rl0@pci2:0:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
class = network
subclass = ethernet
atapci0@pci2:1:0: class=0x010400 card=0x61121095 chip=0x31121095 rev=0x01 hdr=0x00
vendor = 'Silicon Image Inc (Was: CMD Technology Inc)'
device = 'SiI 3112 SATALink/SATARaid Controller'
class = mass storage
subclass = RAID
ath0@pci2:2:0: class=0x020000 card=0x4d001385 chip=0x0013168c rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter'
class = network
subclass = ethernet
--Boundary-00=_DP+mEJdOd56bA4e
Content-Type: text/plain;
charset="us-ascii";
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC2 #0: Thu May 4 13:48:53 EST 2006
root@emmapc.home.wollongong:/usr/obj/usr/src/sys/HOMESRV
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (868.64-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536805376 (511 MB)
avail memory = 515948544 (492 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <GBT AWRDACPI> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x5000-0x500f,0x4000-0x40f7 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0x9000-0x90ff mem 0xd9011000-0xd90110ff irq 5 at device 0.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:bf:7a:01:61
rl0: [GIANT-LOCKED]
atapci0: <SiI 3112 SATA150 controller> port 0x9400-0x9407,0x9800-0x9803,0x9c00-0x9c07,0xa000-0xa003,0xa400-0xa40f mem 0xd9010000-0xd90101ff irq 11 at device 1.0 on pci2
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
ath0: <Atheros 5212> mem 0xd9000000-0xd900ffff irq 9 at device 2.0 on pci2
ath0: [GIANT-LOCKED]
ath0: Ethernet address: 00:09:5b:c9:83:4c
ath0: mac 5.6 phy 4.1 radio 1.7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb000-0xb01f irq 9 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb800-0xb81f irq 9 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel ICH2 (82801BA)> port 0xbc00-0xbcff,0xc000-0xc03f irq 9 at device 31.5 on pci0
pcm0: <SigmaTel STAC9700/83/84 AC97 Codec>
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd47ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 868639705 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
acd0: CDROM <CD-ROM CDU511/1.0h> at ata1-master PIO3
ad6: 194481MB <Maxtor 6L200M0 BANC1E00> at ata3-master SATA150
Trying to mount root from ufs:/dev/ad6s1a
ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=14647359
ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=16540427
ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
ad6: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=6981247
--Boundary-00=_DP+mEJdOd56bA4e--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606232251.15593.robertsg>