Date: Fri, 16 Feb 2007 10:24:42 +0300 From: AstraSerg <astraserg@proc.ru> To: freebsd-stable@freebsd.org Subject: Re: Failed to mount umass with Motorola Razr V3x Message-ID: <200702161024.42389.astraserg@proc.ru> In-Reply-To: <1171593233.1674.5.camel@localhost> References: <1171593233.1674.5.camel@localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
>>> xptioctl: pass driver is not in the kernel <<<< >>> xptioctl: put "device pass0" in your kernel config <<<< On Friday 16 February 2007 05:33, Eric L. Chen wrote: > Hi, > I have a Motorola V3x phone with 1GB T-Flash memory card. > It can mount as a removal drive on Windows XP and Ubuntu, but on FreeBSD > (6.2 stable) will cause these message (see below) and failed to mount. > Does any one know how to fix it? > BTW, If I switch V3x USB as UMTS modem, FreeBSD still cannot use it as > modem device. > > /Eric > > ---------- > umass0: Motorola Inc. Motorola Phone (RAZRV3x), rev 1.10/0.01, addr 2 > umass0: Get Max Lun not supported (SHORT_XFER) > xptioctl: pass driver is not in the kernel > xptioctl: put "device pass0" in your kernel config filexptioctl: put "device pass0" in your kernel config file > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Motorola Motorola Phone 2.31> Removable Direct Access SCSI-2 > device > da0: 1.000MB/s transfers > da0: 952MB (1950721 512 byte sectors: 64H 32S/T 952C) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 1d c4 0 0 0 1 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): MEDIUM ERROR asc:0,0 > (da0:umass-sim0:0:0:0): No additional sense information > (da0:umass-sim0:0:0:0): Retries Exhausted > ---------- -- Sergey Yaroshevsky, astraserg@proc.ru
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200702161024.42389.astraserg>