Date: Thu, 12 Apr 2007 15:32:31 -1000 From: Robert Marella <rmarella@gmail.com> To: Dave <dmehler26@woh.rr.com> Cc: freebsd-questions@freebsd.org Subject: Re: locking down scsi device id's in 6.2 Message-ID: <20070412153231.6cdc124e@p4> In-Reply-To: <001701c77d69$360a20e0$0200a8c0@satellite> References: <000501c778a1$769989b0$0200a8c0@satellite> <20070407124555.3243bbcb@p4> <000501c7797b$961a9010$0200a8c0@satellite> <20070409072701.0687c6cd@p4> <001701c77d69$360a20e0$0200a8c0@satellite>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 12 Apr 2007 21:15:22 -0400 "Dave" <dmehler26@woh.rr.com> wrote: > Hello, > My thanks to everyone who has helped thus far with this > situation. I've gone over scsi(4) and have added the below to > device.hints: > > hint.sa.0.at="scbus0" > hint.sa.0.target="5" > hint.sa.0.unit="0" > hint.cd.0.at="scbus0" > hint.cd.0.target="0" > hint.cd.0.unit="0" > hint.cd.1.at="scbus0" > hint.cd.1.target="1" > hint.cd.1.unit="0" > > camcontrol devlist shows: > <Quantum DLT4000 D996> at scbus0 target 5 lun 0 > (sa0,pass0) <LITE-ON LTR-48246S SS06> at scbus2 target 0 lun > 0 (cd2,pass1) <LITE-ON DVDRW SOHW-1633S BS0K> at scbus2 target 1 > lun 0 (cd3,pass2) > > I used the wired example, but my device didn't wire. Any suggestions > as to what i missed? > Thanks. > Dave. > Dave I still think you are missing the scsi controller. I used to use a scsi hard drive in one of my computers and here is what I had hint.scbus.0.at="ahc0" #find this with dmesg hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" I do not think you have to do anything with the Cd devices. At least I never did. At this time I have an external hard drive on firewire that I have wired down with the following. ### Wire down external hd to da0### hint.scbus.0.at="sbp0" #find this with dmesg hint.da.0.at="scbus0" hint.da.0.target="0" hint.da.0.unit="0" I hope this helps Robert
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070412153231.6cdc124e>