Date: Sat, 12 May 2007 08:41:08 -0700 (PDT) From: mjacob@freebsd.org To: Pawel Jakub Dawidek <pjd@freebsd.org> Cc: freebsd-scsi@freebsd.org Subject: Re: isp(4) mutex recursion. Message-ID: <20070512084036.U37624@ns1.feral.com> In-Reply-To: <20070512110338.GA88520@garage.freebsd.pl> References: <20070512110338.GA88520@garage.freebsd.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
Interesting and noted. Try doing it not as a module. On Sat, 12 May 2007, Pawel Jakub Dawidek wrote: > I've this panic on isp.ko load with recent current: > > isp0: <Qlogic ISP 2300 PCI FC-AL Adapter> port 0x3000-0x30ff mem 0xfc400000-0xfc400fff irq 27 at device 4.0 on pci2 > registered firmware set <isp_2300> > isp0: [ITHREAD] > isp0: Board Type 2300, Chip Revision 0x1, loaded F/W Revision 3.3.19 > panic: _mtx_lock_sleep: recursed on non-recursive mutex isp @ /usr/home/src/HEAD/src/sys/modules/isp/../../dev/isp/isp_freebsd.c:688 > > cpuid = 1 > KDB: enter: panic > [thread pid 560 tid 100030 ] > Stopped at kdb_enter+0x2b: nop > db> tr > Tracing pid 560 tid 100030 td 0xc36ee870 > kdb_enter(c06022ed) at kdb_enter+0x2b > panic(c06014aa,c3c40298,c3c3fb2b,2b0,c04c636f,...) at panic+0x11c > _mtx_lock_sleep(c3778690,c36ee870,0,c3c3fb2b,2b0) at _mtx_lock_sleep+0x3a > _mtx_lock_flags(c3778690,0,c3c3fb2b,2b0,0,...) at _mtx_lock_flags+0x94 > isp_intr_enable(c3778600,c0671a60,0,c0604304,47,...) at isp_intr_enable+0x20 > run_interrupt_driven_config_hooks(0) at run_interrupt_driven_config_hooks+0x43 > config_intrhook_establish(c3778638,c3778638,c3778690,3e5b3000,0,...) at config_intrhook_establish+0xb9 > isp_attach(c3778600,c05f7a2a,1,c3c41560,30,...) at isp_attach+0x81 > isp_pci_attach(c3789680) at isp_pci_attach+0x127d > device_attach(c3789680,c3789680,c3789680,0,c37e4600,...) at device_attach+0x58 > device_probe_and_attach(c3789680,c3789680,c37e4600) at device_probe_and_attach+0xe0 > pci_driver_added(c3789700,c3c414b0) at pci_driver_added+0xd1 > devclass_add_driver(c36dac00,c3c414b0) at devclass_add_driver+0xd5 > driver_module_handler(c3b152c0,0,c3c4149c,c066ca10,c0601132,7b) at driver_module_handler+0x59 > module_register_init(c3c41490) at module_register_init+0x66 > linker_file_sysinit(c3bdd100,c3bdd100,c066c564,c05ffa8f,196,...) at linker_file_sysinit+0x9d > linker_load_file(c383a520,e2296c20) at linker_load_file+0x102 > linker_load_module(0,c37e6000,0,0,e2296c58,c066c564,c05ffa8f,364) at linker_load_module+0xdb > kern_kldload(c36ee870,c37e6000,e2296c7c) at kern_kldload+0x92 > kldload(c36ee870,e2296d00) at kldload+0x4f > syscall(e2296d38) at syscall+0x242 > Xint0x80_syscall() at Xint0x80_syscall+0x20 > --- syscall (304, FreeBSD ELF32, kldload), eip = 0x280c17ab, esp = > 0xbfbfec1c, ebp = 0xbfbfec58 --- > > -- > Pawel Jakub Dawidek http://www.wheel.pl > pjd@FreeBSD.org http://www.FreeBSD.org > FreeBSD committer Am I Evil? Yes, I Am! >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070512084036.U37624>