Date: Sun, 20 May 2007 15:24:29 +0300 From: Laganakos Vassilis <elfshadow@physics.upatras.gr> To: Kris Kennaway <kris@obsecurity.org> Cc: ports@FreeBSD.org Subject: Re: HEADS UP: xorg 7.2 ready for testing Message-ID: <20070520122429.GB12636@pythagoras.physics.upatras.gr> In-Reply-To: <20070519185406.GA27079@pythagoras.physics.upatras.gr> References: <20070510212817.GA67897@xor.obsecurity.org> <20070519125728.GA17457@pythagoras.physics.upatras.gr> <20070519185406.GA27079@pythagoras.physics.upatras.gr>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok, everything upgraded fine after some more pkgdb -F and portupgrade -a, except : x11-toolkits/tix x11-toolkits/qt4-gui I removed them since they were left overs from some app I used some time ago and I don't need them any more. However the mergebase script is complaining now that the following files are in both /usr/local and /usr/X11R6: http://www.physics.upatras.gr/~laganakos/files/freebsd/mergebase.fail I'm not sure what I should do now, and which file to erase or move. Help! X11 still works fine, although I noticed that some applications that still work, use quite larger fonts... Strange, any ideas about this? Kind regards, Vassilis On Sat, May 19, 2007 at 09:54:06PM +0300, Laganakos Vassilis wrote: > The problem with sdl12 was related to evas port. If DirectFB rendering > is enabled in graphics/evas, then devel/sdl does not compile and gives > the error I reported. > > I disabled the DirectFB rendering in evas, and sdl installed correctly. > The other ones failed again, but I hope after a few "portupgrade -a" > they will compile and upgrade. > > Kind regards, > > Vassilis > > On Sat, May 19, 2007 at 03:57:28PM +0300, Laganakos Vassilis wrote: > > On Thu, May 10, 2007 at 05:28:17PM -0400, Kris Kennaway wrote: > > > We're asking all FreeBSD ports committers and other interested > > > developers to participate in this process: it's now up to you guys to > > > test the upgrade and report problems you encounter, before we unleash > > > it on the general user base. > > > > Hi, > > > > A bit delayed :) but I finally got the tarball (the "latest" one from the > > Wiki page) and I proceeded to upgrading. Everything related to the xorg-* > > ports seemed to go just fine. After ~36 hours of compiling and numerous > > "portupgrade -a" it came down to the failure of the following, that > > prevented the upgrade of the rest ports. The "faulted" ones are: > > > > x11-toolkits/tix > > x11-toolkits/qt4-gui > > devel/sdl12 > > graphics/gimp > > print/gutenprint > > > > I'm not sure why the gimp and related port, showed up problems. I had > > upgraded it the way the UPGRADE said a month ago. Anyway, I can remove > > them and try again. > > > > The links to the scripts of the failing ones (bziped and bunzipped): > > > > http://www.physics.upatras.gr/~laganakos/files/freebsd/x11-toolkits_tix > > http://www.physics.upatras.gr/~laganakos/files/freebsd/x11-toolkits_tix.bz2 > > http://www.physics.upatras.gr/~laganakos/files/freebsd/x11-toolkits_qt4-gui > > http://www.physics.upatras.gr/~laganakos/files/freebsd/x11-toolkits_qt4-gui.bz2 > > http://www.physics.upatras.gr/~laganakos/files/freebsd/devel_sdl12 > > http://www.physics.upatras.gr/~laganakos/files/freebsd/devel_sdl12.bz2 > > > > Any clues about this? I followed exactly the procedure you described for > > the upgrading. I havent though executed the merging script, because I'm > > not sure if I should run this after the first portupgrade -a, or wait > > until everything has compliled and upgraded correctly. (This was not > > very clear) > > > > Xorg 7.2 though, works sweet and I have the impression that my X600 > > radeon is going faster :) > > > > Thanx to everyone that worked on the port! > > > > Kind regards, > > > > > > Vassilis > > -- > > > > _______________________________________________ > > freebsd-ports@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > > To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org" > > -- > > _______________________________________________ > freebsd-ports@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-ports > To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org" --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070520122429.GB12636>