Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 15 Oct 2007 16:42:51 -0700
From:      John-Mark Gurney <gurney_j@resnet.uoregon.edu>
To:        Michael Butler <imb@protected-networks.net>
Cc:        current@freebsd.org, Marius Strobl <marius@alchemy.franken.de>
Subject:   Re: HEADS UP: [cvs commit: src UPDATING src/share/man/man4 pci.4 src/share/man/man9 pci.9 src/sys/amd64/include legacyvar.h	src/sys/amd64/amd64 legacy.c src/sys/amd64/pci pci_bus.c	src/sys/arm/xscale/i80321 i80321_pci.c src/sys/arm/xscale/ixp425 ...
Message-ID:  <20071015234251.GR39759@funkthat.com>
In-Reply-To: <47001D02.4080700@protected-networks.net>
References:  <20070930114914.GB38896@alchemy.franken.de> <47001D02.4080700@protected-networks.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Michael Butler wrote this message on Sun, Sep 30, 2007 at 18:02 -0400:
> Marius Strobl wrote:
> > As mentioned in UPDATING the change below requires the hal port
> > to be recompiled in order to continue to work. On !386 you
> > additionally need to update to xorg-server-1.4_1,1.
> > Regarding common ports affected by the introduction of support
> > for PCI domains these two ports should be it.
> > Other consumers of <sys/pciio.h> potentially also need to be
> > recompiled and adjusted, f.e. sjog needs to be recompiled but
> > should need no changes. Generally, if a port uses pc_bus it
> > also needs to deal with pc_domain now.
> 
> This breaks [ls|set]pci even when recompiled.
> 
> It also breaks my ability to use an /etc/rc.early containing ..
> 
> 	pciconf -wb pci0:30:0 0x1a 8
> 
>  .. which is required to allow any cardbus devices, e.g. Netgear WG511T,
> to work. The problem is that we don't (and nor does the BIOS) properly
> set the subordinate bus of the parent PCI-PCI bridge and the above
> command sets it 'manually'.

Is there a PR for this?  Could you send a verbose boot message for this?
It shouldn't be hard to fix, and pretty easy one to fix too.

-- 
  John-Mark Gurney				Voice: +1 415 225 5579

     "All that I will do, has been done, All that I have, has not."



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071015234251.GR39759>