Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 6 Nov 2007 06:47:49 -0800
From:      Jeremy Chadwick <koitsu@FreeBSD.org>
To:        Rusty Nejdl <rnejdl@ringofsaturn.com>
Cc:        d@delphij.net, "Andrey V. Elsukov" <bu7cher@yandex.ru>, "Aryeh M. Friedman" <aryeh.friedman@gmail.com>, Justin Hibbits <jrh29@alumni.cwru.edu>, freebsd-current@freebsd.org
Subject:   Re: [ANNOUNCEMENT] Wiki for discussing P35/IHC9(R)/SATA issues set up
Message-ID:  <20071106144749.GA91218@eos.sc1.parodius.com>
In-Reply-To: <62151.71.164.232.42.1194356793.squirrel@mail.ringofsaturn.com>
References:  <472EB211.7050001@delphij.net> <472EEADF.1000008@gmail.com> <472F466E.8050405@delphij.net> <472F5846.1020304@gmail.com> <472F5D9A.9050900@delphij.net> <472FCC15.9040903@gmail.com> <472FD0FB.9090608@delphij.net> <473001E7.2090201@yandex.ru> <473017DF.7070105@gmail.com> <62151.71.164.232.42.1194356793.squirrel@mail.ringofsaturn.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Nov 06, 2007 at 07:46:33AM -0600, Rusty Nejdl wrote:
> <Intel ICH8 SATA300 controller>
> ata5: <ATA channel 0> on atapci1
> ata6: <ATA channel 1> on atapci1
> ata7: <ATA channel 0> on atapci2
> ata8: <ATA channel 1> on atapci2
> ad10: 143089MB <WDC WD1500ADFD-00NLR1 20.07P20> at ata5-master SATA150
> ad16: 715404MB <Seagate ST3750640AS 3.AAK> at ata8-master SATA150
> acd0: DVDR <LITE-ON DVDRW LH-20A1L/BL01> at ata7-master SATA150
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00

Those devices are connected to the ICH8.  Let's break down the
capabilities of each disk:

> ad10: 143089MB <WDC WD1500ADFD-00NLR1 20.07P20> at ata5-master SATA150

Only does SATA150, according to the manufacturer's documentation:

http://www.westerndigital.com/en/products/Products.asp?DriveID=189

> ad16: 715404MB <Seagate ST3750640AS 3.AAK> at ata8-master SATA150

Does SATA300, but has the same "feature" as the OP's Seagate drive:
a small jumper that limits the drive to SATA150 unless removed.
See below PDF.

http://www.seagate.com/ww/v/index.jsp?vgnextoid=e2af99f4fa74c010VgnVCM100000dd04090aRCRD&locale=en-US
http://www.seagate.com/staticfiles/support/disc/manuals/desktop/Barracuda%207200.10/100402371h.pdf

> acd0: DVDR <LITE-ON DVDRW LH-20A1L/BL01> at ata7-master SATA150
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00

Does not disclose what SATA protocol it supports, and my bet is
version 1 (SATA150), like most other SATA ATAPI devices.

http://us.liteonit.com/us/index.php?option=com_content&task=view&id=205&Itemid=67&limit=1&limitstart=1

> <JMicron JMB363 SATA300 controller>
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> ata4: <ATA channel 2> on atapci0

This controller has AHCI enabled, but has absolutely nothing connected
to it.

-- 
| Jeremy Chadwick                                    jdc at parodius.com |
| Parodius Networking                           http://www.parodius.com/ |
| UNIX Systems Administrator                      Mountain View, CA, USA |
| Making life hard for others since 1977.                  PGP: 4BD6C0CB |




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20071106144749.GA91218>