Date: Sun, 28 Sep 2008 17:02:26 -0700 From: Jeremy Chadwick <koitsu@FreeBSD.org> To: Bruce Cran <bruce@cran.org.uk> Cc: freebsd-hackers@freebsd.org, Andrey Elsukov <bu7cher@yandex.ru>, Pegasus McCleaft <ken@hercules.mthelicon.com>, sos@freebsd.org Subject: Re: atacontrol broken in 7.1-PR Message-ID: <20080929000226.GA92057@icarus.home.lan> In-Reply-To: <20080928232438.5d0c4a55@tau.draftnet> References: <20080928103937.U51561@hercules.mthelicon.com> <20080928232438.5d0c4a55@tau.draftnet>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Sep 28, 2008 at 11:24:38PM +0100, Bruce Cran wrote:
> On Sun, 28 Sep 2008 10:43:58 +0000 (UTC)
> Pegasus McCleaft <ken@hercules.mthelicon.com> wrote:
>
> > Hello everyone.
> >
> > I was wondering if anyone else is experiencing this problem.
> > I have recently reloaded my machine (due to a meltdown of my primary
> > boot drive) and noticed that under 7.0-rel the atacontrol command
> > seems to work great, however, under 7.1 I get and error
> >
> > atacontrol: ioctl(IOCATADEVICES): Device not configured
> >
> > Has anyone else seen this error. I wouldent be conserned if
> > it wasent for the fact that it worked under 7.0-rel but now dosent.
> > The machine is using both the:
> >
> > atapci0: <SiI SiI 3132 SATA300 controller>
> > atapci1: <JMicron JMB363 SATA300 controller>
>
> I'm also seeing this problem on my amd64 7.1-PRERELEASE system:
>
> > atacontrol list
> ATA channel 0:
> Master: acd0 <HL-DT-ST DVD+/-RW GSA-T11N/A102> ATA/ATAPI revision 5
> Slave: no device present
> atacontrol: ioctl(IOCATADEVICES): Device not configured
>
> I've attached the dmesg, and truss output from "atacontrol list".
Your dmesg output implies you're not using atapicam, while Pegasus is.
So I believe that rules that out.
Are you using ATA_STATIC_ID? If not, then I'm out of "simple" ideas as
to what could be causing this.
> open("/dev/ata",O_RDWR,037777766320) = 3 (0x3)
> ioctl(3,IOCATAGMAXCHANNEL,0xffffec20) = 0 (0x0)
> ioctl(3,IOCATADEVICES,0xffffe590) = 0 (0x0)
> fstat(1,{ mode=-rw-r--r-- ,inode=307828,size=2281,blksize=4096 }) = 0 (0x0)
> __sysctl(0x7fffffffdba0,0x2,0x800845b48,0x7fffffffdbb8,0x0,0x0) = 0 (0x0)
> __sysctl(0x7fffffffd6f0,0x2,0x8008547d8,0x7fffffffd6e8,0x0,0x0) = 0 (0x0)
> __sysctl(0x7fffffffd730,0x2,0x7fffffffd74c,0x7fffffffd740,0x0,0x0) = 0 (0x0)
> readlink("/etc/malloc.conf",0x7fffffffd790,1024) ERR#2 'No such file or directory'
> issetugid(0x80071c2aa,0x7fffffffd790,0xffffffffffffffff,0x0,0xffffffff80ac1c40,0x7fffffffd768) = 0 (0x0)
> break(0x600000) = 0 (0x0)
> break(0x700000) = 0 (0x0)
> ioctl(3,IOCATADEVICES,0xffffe590) ERR#6 'Device not configured'
I've snipped the truss output to the relevant piece.
fd 3 points to /dev/ata, and there are no man pages which document
the IOCATADEVICES ioctl. I'll have to look at the source.
--
| Jeremy Chadwick jdc at parodius.com |
| Parodius Networking http://www.parodius.com/ |
| UNIX Systems Administrator Mountain View, CA, USA |
| Making life hard for others since 1977. PGP: 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080929000226.GA92057>