Date: Wed, 10 Jun 2009 09:23:30 -0400 From: Mike Tancsa <mike@sentex.net> To: Andre Oppermann <andre@freebsd.org>, freebsd-stable@freebsd.org Cc: scottl@freebsd.org Subject: Re: (probe23:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step Message-ID: <200906101321.n5ADLbds031697@lava.sentex.ca> In-Reply-To: <4A2FA4EF.5060603@freebsd.org> References: <4A2FA4EF.5060603@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
At 08:19 AM 6/10/2009, Andre Oppermann wrote: >Today I upgraded an AMD64 server from FreeBSD 6.4 to 7-STABLE and got a big >nasty surprise with the Areca RAID controller: > >arcmsr0: <Areca SATA Host Adapter RAID Controller (RAID6 capable) > > mem 0xfdbff000-0xfdb400000 irq16 at device 14.0 on pci18 >ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07 >ARECA RAID ADAPTER0: FIRMWARE VERSION V1.46 2009-01-06 >arcmsr0: [ITHREAD] >... >(probe23:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step >run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config Not sure if its a firmware issue or not, but I am running an AMD64 RELENG_7 kernel from Apr 23 and its works fine. The DV1 error seems "normal" in that I get it as well. I dont boot off the controller, so not sure if thats part of the issue or not. arcmsr0: <Areca SATA Host Adapter RAID Controller > mem 0xea600000-0xea600fff irq 18 at device 14.0 on pci3 ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07 ARECA RAID ADAPTER0: FIRMWARE VERSION V1.44 2008-2-1 arcmsr0: [ITHREAD] (probe48:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step da1 at arcmsr0 bus 0 target 0 lun 0 da1: <Areca usrvar R001> Fixed Direct Access SCSI-5 device da1: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da1: Command Queueing Enabled da1: 76293MB (156249600 512 byte sectors: 255H 63S/T 9726C) da0 at twa0 bus 0 target 0 lun 0 da0: <AMCC 9650SE-2LP DISK 3.08> Fixed Direct Access SCSI-5 device da0: 100.000MB/s transfers da0: 66747MB (136697856 512 byte sectors: 255H 63S/T 8509C) da2 at arcmsr0 bus 0 target 0 lun 1 da2: <Areca backup1 R001> Fixed Direct Access SCSI-5 device da2: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit) da2: Command Queueing Enabled da2: 2784728MB (5703123456 512 byte sectors: 255H 63S/T 355003C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200906101321.n5ADLbds031697>