Date: Mon, 28 Dec 2009 13:56:07 +0000 From: Anton Shterenlikht <mexas@bristol.ac.uk> To: freebsd-sparc64@freebsd.org Subject: usb mount error: g_vfs_done():da0s1[READ(offset=512, length=8192)]error = 5 Message-ID: <20091228135607.GA6907@mech-cluster241.men.bris.ac.uk>
next in thread | raw e-mail | index | archive | help
I need to mount a usb device (digital camera in this case). On i386 9.0-current all is well. On sparc 9.0-current I get on the console: mount_msdosfs: /dev/da0s1: Input/output error and in dmesg: g_vfs_done():da0s1[READ(offset=512, length=8192)]error = 5 On both systems dmesg gives: ugen0.2: <OLYMPUS> at usbus0 umass0: <OLYMPUS C4100Z/C4000Z, class 0/0, rev 1.10/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:2:0:-1: Attached to scbus2 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <OLYMPUS C4100Z/C4000Z 1.00> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) GEOM: da0: partition 1 does not start on a track boundary. GEOM: da0: partition 1 does not end on a track boundary. On both systems I have in /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/da0s1 /mnt msdosfs rw,noauto Please advise many thanks anton -- Anton Shterenlikht Room 2.6, Queen's Building Mech Eng Dept Bristol University University Walk, Bristol BS8 1TR, UK Tel: +44 (0)117 331 5944 Fax: +44 (0)117 929 4423
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091228135607.GA6907>