Date: Mon, 8 Feb 2010 15:33:29 +0100 From: Guido Falsi <mad@madpilot.net> To: FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: ATA_CAM + ZFS gives short 1-2 seconds system freeze on disk load Message-ID: <20100208143329.GA12057@megatron.madpilot.net>
next in thread | raw e-mail | index | archive | help
--T4sUOijqQbZv57TR
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi!
I'm seeing this problem on my machine at work. It's an HP DC 7800,
mounts an ich9 chipset(not ahci capable). I'm attaching the dmesg.
I noticed this in the past, but it got evident(and very annoying)
while recompiling many ports today after the jpeg-8 update.
It looks like it freezes the system for the second or two it takes
to flush buffers to disk when there are big outputs. This happens
when decompressiong big distfiles, mainly. The openoffice port
triggers this almost continuosly every few seconds during compilation.
I've also seen this when working with big files(for example graphic
images in uncompressed formats).
It gets very annoying and I don't remember this happening before
activating the ATA_CAM flag. There was some slowdown with big disk
access, but not a total freeze.
The input I give during the freeze is not lost though, but replayed in a
bunch as soon as the system becomes responsive again.
BTW there's another thing that shows up on this machine. Lately, this
too after putting the option ATA_CAM in the kernel, during boot there is
a long pause(exactly one minute, as the message below states) in this
point of the dmesg:
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen2.2: <Logitech> at usbus2
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
usbus2
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on
usbus2
ugen1.2: <vendor 0x0df6> at usbus1
ubt0: <vendor 0x0df6 Sitecom USB bluetooth2.0 class 2 dongle CN-512,
class 224/1
, rev 2.00/19.58, addr 2> on usbus1
---------- 60 seconds pause happens here ------------
run_interrupt_driven_hooks: still waiting after 60 seconds for
xpt_config
ada0 at ata0 bus 0 scbus2 target 0 lun 0
ada0: <ST3160815AS 3.CHF> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO size 8192bytes)cd0 at
ata1 bus
0 scbus3 target 0 lun 0
This is not a big problem but quite annoying too.
Maybe they're related, maybe not. I don't relly know.
Hope these indications help. If needed I could provide more information
and test patches.
Thanks to the developers for they're great work on FreeBSD. Hope this
email helps make it even better!
Thanks in advance for any attention to this problem!
--
Guido Falsi <mad@madpilot.net>
--T4sUOijqQbZv57TR
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #38: Mon Feb 8 10:27:55 CET 2010
root@vwg82.xxx.it:/usr/obj/usr/src/sys/VWG82 amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2327.51-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4299161600 (4100 MB)
avail memory = 4037332992 (3850 MB)
ACPI APIC Table: <COMPAQ BEARLAKE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
netsmb_dev: loaded
iscsi: version 2.1.0
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1230-0x1237 mem 0xf0100000-0xf017ffff,0xe0000000-0xefffffff,0xf0000000-0xf00fffff irq 16 at device 2.0 on pci0
agp0: <Intel Q35 SVGA controller> on vgapci0
agp0: detected 6140k stolen memory
agp0: aperture size is 256M
drm0: <Intel Q35> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port 0x1238-0x123f,0x1270-0x1273,0x1240-0x1247,0x1274-0x1277,0x11e0-0x11ef irq 18 at device 3.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 6.9.14> port 0x1100-0x111f mem 0xf0180000-0xf019ffff,0xf01a5000-0xf01a5fff irq 19 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:1e:0b:ab:e6:a7
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1120-0x113f irq 20 at device 26.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1140-0x115f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1160-0x117f irq 22 at device 26.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6000-0xf01a63ff irq 22 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf01a0000-0xf01a3fff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100122_0141
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci32: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci48: <ACPI PCI bus> on pcib2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1180-0x119f irq 20 at device 29.0 on pci0
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x11a0-0x11bf irq 21 at device 29.1 on pci0
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6400-0xf01a67ff irq 20 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus6: EHCI version 1.0
usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x11f0-0x11ff,0x1200-0x120f irq 18 at device 31.2 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
atapci2: <Intel ICH9 SATA300 controller> port 0x1260-0x1267,0x1280-0x1283,0x1268-0x126f,0x1284-0x1287,0x1210-0x121f,0x1220-0x122f irq 18 at device 31.5 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0xfc offMax=0x25a
Waiting 5 seconds for SCSI devices to settle
hdac0: HDA Codec #0: Analog Devices AD1884
pcm0: <HDA Analog Devices AD1884 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Analog Devices AD1884 PCM #1 Analog> at cad 0 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen2.2: <Logitech> at usbus2
ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on usbus2
ums0: 16 buttons and [XYZ] coordinates ID=0
uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on usbus2
ugen1.2: <vendor 0x0df6> at usbus1
ubt0: <vendor 0x0df6 Sitecom USB bluetooth2.0 class 2 dongle CN-512, class 224/1, rev 2.00/19.58, addr 2> on usbus1
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
ada0 at ata0 bus 0 scbus2 target 0 lun 0
ada0: <ST3160815AS 3.CHF> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO size 8192bytes)cd0 at ata1 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-H653N HB01> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO size 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada1 at ata4 bus 0 scbus4 target 0 lun 0
ada1: <ST3160815AS 3.CHF> ATA-7 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO size 8192bytes)
ada1: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
Trying to mount root from zfs:tank
em0: link state changed to UP
--T4sUOijqQbZv57TR--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100208143329.GA12057>