Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 22 May 2010 13:04:42 +0200
From:      Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no>
To:        freebsd-multimedia@FreeBSD.org
Subject:   Re: usleep's pvrxxx  port and FreeBSD 8.0-stable
Message-ID:  <20100522130442.7dd0c114.torfinn.ingolfsen@broadpark.no>
In-Reply-To: <201005212042.42604.shoesoft@gmx.net>
References:  <20100520215645.0f506ba7.torfinn.ingolfsen@broadpark.no> <20100521105145.56bcd718.torfinn.ingolfsen@broadpark.no> <20100521165407.5a7da822.torfinn.ingolfsen@broadpark.no> <201005212042.42604.shoesoft@gmx.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 21 May 2010 20:42:42 +0200
Stefan Ehmann <shoesoft@gmx.net> wrote:

> Okay, another thing I forgot. Just disable -Werror:
> $ make WERROR=

That made the compile go allright, at least. I haven't tested it yet, but it looks promising.
Here is the output from dmesg:
cxm0: <Conexant iTVC16 MPEG Coder> mem 0xe0000000-0xe3ffffff irq 18 at device 8.0 on pci2
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
<2>tveeprom: Second (radio) tuner idx 101
<2>tveeprom: ivtv version
<2>tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990584
<2>tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
<2>tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
<2>tveeprom: audio processor = CX25843 (type = 25)
<2>tveeprom: decoder processor = CX25843 (type = 1e)
tuner type: 56
cxm0: Eeprom PAL
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by cxm
tuner: switching to v4l2
before tuner_command!
tuner: tv freq set to 55.25
tuner: tv 0x05 0xe3 0xce 0x01
<2>cxm 0-0000: Video signal:              not present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       forced mode
<2>cxm 0-0000: Detected audio standard:   forced audio standard
<2>cxm 0-0000: Audio muted:               yes
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode:     undefined
<2>cxm 0-0000: Specified standard:        PAL-BDGHI
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
<2>cxm 0-0000: Selected 65 MHz format:    autodetect
<2>cxm 0-0000: Selected 45 MHz format:    chroma
cxm0: [ITHREAD]
cxm0: encoder firmware version 0x2060039
cxm1: <Conexant iTVC16 MPEG Coder> mem 0xe4000000-0xe7ffffff irq 19 at device 9.0 on pci2
cxm_iic1: <Conexant iTVC15 / iTVC16 I2C controller> on cxm1
iicbb1: <I2C bit-banging driver> on cxm_iic1
iicbus1: <Philips I2C bus> on iicbb1 master-only
<2>tveeprom: Second (radio) tuner idx 101
<2>tveeprom: ivtv version
<2>tveeprom: Hauppauge: model = 23559, rev = D591, serial# = 2990584
<2>tveeprom: tuner = Philips FQ1216AME MK4 (idx = 91, type = 56)
<2>tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
<2>tveeprom: audio processor = CX25843 (type = 25)
<2>tveeprom: decoder processor = CX25843 (type = 1e)
tuner type: 56
cxm1: Eeprom PAL
tuner: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) by cxm
tuner: switching to v4l2
before tuner_command!
tuner: tv freq set to 55.25
tuner: tv 0x05 0xe3 0xce 0x01
<2>cxm 0-0000: Video signal:              not present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       forced mode
<2>cxm 0-0000: Detected audio standard:   forced audio standard
<2>cxm 0-0000: Audio muted:               yes
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: A2-BG
<2>cxm 0-0000: Configured audio mode:     undefined
<2>cxm 0-0000: Specified standard:        PAL-BDGHI
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
<2>cxm 0-0000: Selected 65 MHz format:    autodetect
<2>cxm 0-0000: Selected 45 MHz format:    chroma
cxm1: [ITHREAD]
cxm1: encoder firmware version 0x2060039

(this is a PVR-500)
root@kg-fil# uname -a
FreeBSD kg-fil.kg4.no 8.1-PRERELEASE FreeBSD 8.1-PRERELEASE #4: Fri May 21 00:20:01 CEST 2010     root@kg-fil.kg4.no:/usr/obj/usr/src/sys/GENERIC  amd64
-- 
Torfinn




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100522130442.7dd0c114.torfinn.ingolfsen>