Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Sep 2010 17:18:00 +0200
From:      Jeremie Le Hen <jeremie@le-hen.org>
To:        Jeremy Chadwick <freebsd@jdc.parodius.com>
Cc:        freebsd-stable@freebsd.org, pluknet <pluknet@gmail.com>, Jeremie Le Hen <jeremie@le-hen.org>
Subject:   Re: Cannot install using serial console
Message-ID:  <20100910151800.GX16902@felucia.tataz.chchile.org>
In-Reply-To: <20100910112726.GA9262@icarus.home.lan>
References:  <20100907145028.GF16902@felucia.tataz.chchile.org> <AANLkTi=qhUspTMaW-608TKhVZ9PJHBydhQHKQCiwgb6b@mail.gmail.com> <20100910111434.GU16902@felucia.tataz.chchile.org> <20100910112726.GA9262@icarus.home.lan>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Jeremy,

On Fri, Sep 10, 2010 at 04:27:26AM -0700, Jeremy Chadwick wrote:
> > > As far as I know you need also to enable a serial terminal in /etc/ttys.
> > 
> > Yeah, this came to my mind too but I check on the installation CD, there
> > is no /etc/ttys.
> 
> This is normal.
> 
> Can you try hacking up a solution for yourself based on what I've
> documented with regards to PXE booting?  There will be pieces which
> obviously don't apply to you because you're booting from physical media,
> but some of the adjustments (to the bootloader, etc.) you can try.
> 
> http://jdc.parodius.com/freebsd/pxeboot_serial_install_8.html

But as far as I understand the handbook, this is not required to perform
the installation through sysinstall(8) on a serial console.  Modifying
/boot/loader.conf on the installation media is enough according to
chapter 2.12.1.  Am I wrong?


> One thing worth pointing out is that you stated the system that you're
> trying to use serial console on is actually running under a VM on Linux:
> 
> > I tried to install FreeBSD (201008 -CURRENT snapshot, but I don't think
> > it's important here) in a KVM-backed virtual machine on a headless Linux
> > host, following section 2.12.1 of the handbook.
> 
> Can you provide a full dmesg prior to the "/stand/sysinstal" output
> happening?  You don't need to boot verbose (yet), but it would help with
> regards to determining what the kernel is seeing device-wise.  Yes it
> matters.

Yes, I've actually already posted it in my original message:
http://lists.freebsd.org/pipermail/freebsd-stable/2010-September/058703.html

Thanks for you attention.
Regards,
-- 
Jeremie Le Hen

Humans are born free and equal.  But some are more equal than others.
					    Coluche



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100910151800.GX16902>