Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 18 Dec 2010 20:30:20 +0200
From:      Ivan Klymenko <fidaj@ukr.net>
To:        freebsd-current@FreeBSD.ORG
Subject:   dev/psm0 not found
Message-ID:  <20101218203020.1cec8dc7@ukr.net>

next in thread | raw e-mail | index | archive | help
http://svn.freebsd.org/viewvc/base/head/sys/dev/atkbdc/psm.c?view=log

after updating svn revision => 216491 system is not detecting the device
psm
http://svn.freebsd.org/viewvc/base?view=revision&revision=216491




Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0 r216524: Sat Dec 18 19:51:17 EET 2010
    ivan@nonamehost:/usr/obj/usr/src/sys/mk9 amd64
CPU: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (1994.47-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fd  Family = 6  Model = f  Stepping = 13
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2039611392 (1945 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL   M08    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Cuse4BSD v0.1.13 @ /dev/cuse
kbd1 at kbdmux0
acpi0: <DELL M08    > on motherboard
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, 7fd6d800 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfd000000-0xfdffffff,0xe0000000-0xefffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
nvidia0: <GeForce 8400M GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib3
pci12: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci13: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib5
bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xf9bf0000-0xf9bfffff irq 17 at device 0.0 on pci9
bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
bge0: Ethernet address: 00:1c:23:f9:bb:5f
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib6
fwohci0: <1394 Open Host Controller Interface> mem 0xf9aff800-0xf9afffff irq 19 at device 1.0 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 32:4f:c0:00:1c:e5:20:70
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x3814000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:e5:20:70
fwe0: Ethernet address: 32:4f:c0:e5:20:70
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 32:4f:c0:00:1c:e5:20:70 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
pci3: <base peripheral, SD host controller> at device 1.1 (no driver attached)
pci3: <base peripheral> at device 1.2 (no driver attached)
pci3: <base peripheral> at device 1.3 (no driver attached)
pci3: <base peripheral> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ahci0: <Intel ICH8M AHCI SATA controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eff mem 0xfebfb800-0xfebfbfff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 2 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 2 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <12 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
acd0: DVDR <PBDS DVD+/-RW DS-8W1P/BD1B> at ata0-master UDMA33 
hdac0: HDA Codec #0: Sigmatel STAC9228X
hdac0: HDA Codec #1: Conexant (Unknown)
pcm0: <HDA Sigmatel STAC9228X PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Sigmatel STAC9228X PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Sigmatel STAC9228X PCM #2 Digital> at cad 0 nid 1 on hdac0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ugen6.2: <Mobile> at usbus6
umass0: <Mobile disk by philips, class 0/0, rev 2.00/1.03, addr 2> on usbus6
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST9320325AS 0001SDM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Mobile disk by philips 1.03> Fixed Direct Access SCSI-4 device 
da0: 40.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors: 255H 63S/T 19457C)
SMP: AP CPU #1 Launched!
ugen4.2: <A4Tech> at usbus4
ums0: <A4Tech PS2+USB Mouse, class 0/0, rev 1.10/0.02, addr 2> on usbus4
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen6.3: <vendor 0x05a9> at usbus6
Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]...
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:ata0:0:0:0): CAM status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI status: Check Condition
(probe0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata0 bus 0 scbus4 target 0 lun 0
cd0: <PBDS DVD+-RW DS-8W1P BD1B> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
kqemu version 0x00010400
kqemu: KQEMU installed, max_locked_mem=1034776kB.
sdhci0: <RICOH R5C822 SD> mem 0xf9aff400-0xf9aff4ff irq 18 at device 1.1 on pci3
sdhci0: 1 slot(s) allocated
GEOM: md0: geometry does not match label (1h,63s != 1h,1s).
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
acd0: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0
ugen4.2: <A4Tech> at usbus4 (disconnected)
ums0: at uhub4, port 2, addr 2 (disconnected)
ugen4.2: <A4Tech> at usbus4
ums0: <A4Tech PS2+USB Mouse, class 0/0, rev 1.10/0.02, addr 2> on usbus4
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen4.2: <A4Tech> at usbus4 (disconnected)
ums0: at uhub4, port 2, addr 2 (disconnected)
ugen4.2: <A4Tech> at usbus4
ums0: <A4Tech PS2+USB Mouse, class 0/0, rev 1.10/0.02, addr 2> on usbus4
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen4.2: <A4Tech> at usbus4 (disconnected)
ums0: at uhub4, port 2, addr 2 (disconnected)
ugen4.2: <A4Tech> at usbus4
ums0: <A4Tech PS2+USB Mouse, class 0/0, rev 1.10/0.02, addr 2> on usbus4
ums0: 8 buttons and [XYZ] coordinates ID=0






What happened and how do I fix this?

Thanks!



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20101218203020.1cec8dc7>