Date: Thu, 28 Feb 2013 14:35:58 +0900 From: YongHyeon PYUN <pyunyh@gmail.com> To: Miroslav Lachman <000.fbsd@quip.cz> Cc: freebsd-net@freebsd.org Subject: Re: FreeBSD 9.1-RELEASE + bge0 == watchdog timeout Message-ID: <20130228053558.GA1474@michelle.cdnetworks.com> In-Reply-To: <512DE968.4020409@quip.cz> References: <F02BE044-1C4F-43EB-8091-BC62362C2E5F@sd63.bc.ca> <D557DE29-DED8-4B89-9D1C-171FC17D435E@hub.org> <201302241106.42477.vegeta@tuxpowered.net> <20130225082042.GB1426@michelle.cdnetworks.com> <512CF97B.8030805@norma.perm.ru> <20130227020123.GA3581@michelle.cdnetworks.com> <512DE968.4020409@quip.cz>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Feb 27, 2013 at 12:09:28PM +0100, Miroslav Lachman wrote: > YongHyeon PYUN wrote: > >On Wed, Feb 27, 2013 at 12:05:47AM +0600, Eugene M. Zheganin wrote: > > [...] > > >bge(4)'s IPMI support for old controllers had many issues and > >didn't work well. Only some of users had luck to enjoy it. However > >IPMI support for 5717/5718/5719/5720 has no known issues and it > >should work. I also got a report that mentions IPMI does not work > >any more on 5715 after adding support for 5717/5718/5719/5720. > >The sanitized public data sheet does not mention IPMI interface so > >Linux tg3 would be the only source of information. Given that I > >don't have access to IPMI-capable controllers I have no idea when > >it could be fixed. Somebody with the IPMI-capable controllers have > >to sit down and verify all possible combinations. > > I have a spare machine Sun Fire X2100 M2 with 5715C: > > bge0@pci0:6:4:0: class=0x020000 card=0x534c108e chip=0x167814e4 > rev=0xa3 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM5715C 10/100/100 PCIe Ethernet Controller' > class = network > subclass = ethernet > bge1@pci0:6:4:1: class=0x020000 card=0x534c108e chip=0x167814e4 > rev=0xa3 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM5715C 10/100/100 PCIe Ethernet Controller' > class = network > subclass = ethernet > > I can provide you full access to this machine (if you want) or let me > know, what version I should check. Older versions (6.x - 8.3) are > working fine with hw.bge.allow_asf="1" in loader.conf. I didn't test > newer releases on these old machines. The reporter said the machine was Sun Fire X2200 M2 so I guess you may see the same issue on both stable/9 and stable/8. Ideally the loader tunable hw.bge.allow_asf should not be there and driver should take care of it by checking the existence of ASF/IPMI firmware. Can you setup a remote debugging environments(+ IPMI access) like the following URL? http://people.freebsd.org/~yongari/remote_debugging.txt > > Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130228053558.GA1474>