Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 16 Jun 2014 08:50:50 +0200
From:      Matthias Apitz <guru@unixarea.de>
To:        Hans Petter Selasky <hps@selasky.org>
Cc:        freebsd-usb@freebsd.org
Subject:   Re: Fwd: USB to parallel for printer HP LaserJet 4mL
Message-ID:  <20140616065050.GA1552@La-Habana>
In-Reply-To: <539E87EF.9080404@selasky.org>
References:  <20140602150802.GA1950@La-Habana> <538C9A83.7050606@selasky.org> <20140610054403.GA1589@La-Habana> <539964AB.1030909@selasky.org> <20140613184921.GA1748@La-Habana> <539BEE2E.9050108@selasky.org> <20140614181138.GA1598@La-Habana> <539C9181.10304@selasky.org> <20140616054141.GA1358@La-Habana> <539E87EF.9080404@selasky.org>

next in thread | previous in thread | raw e-mail | index | archive | help
El día Monday, June 16, 2014 a las 08:00:15AM +0200, Hans Petter Selasky escribió:

> Hi,
> 
> Can you also use only the no-reset version: /dev/unlpt0 ?
> 
> Make sure device is power cycled first.

Hi,

I did

- detached USB cable
- power cycled device
- wait until device ready

# kldunload ulpt.ko
# kldload modules/usb/ulpt/ulpt.ko
# sysctl hw.usb.ulpt.debug=15
hw.usb.ulpt.debug: 0 -> 15

- now pluged in the USB cable

# date > /dev/unlpt0
^C
# date
lunes, 16 de junio de 2014, 08:44:49 CEST
#

messages are attached; thx

Jun 16 08:44:02 La-Habana root: Unknown USB device: vendor 0x0c45 product 0x62c0 bus uhub3
Jun 16 08:44:02 La-Habana root: Unknown USB device: vendor 0x0c45 product 0x62c0 bus uhub3
Jun 16 08:44:27 La-Habana kernel: ugen1.2: <Prlific Technology Inc.> at usbus1
Jun 16 08:44:27 La-Habana kernel: ulpt_probe: 
Jun 16 08:44:27 La-Habana kernel: ulpt_probe: 
Jun 16 08:44:27 La-Habana kernel: ulpt_attach: sc=0xc596c580
Jun 16 08:44:27 La-Habana kernel: ulpt0: <Prlific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.00, addr 2> on usbus1
Jun 16 08:44:27 La-Habana kernel: ulpt_attach: setting alternate config number: 1
Jun 16 08:44:27 La-Habana kernel: ulpt0: using bi-directional mode
Jun 16 08:44:27 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status
Jun 16 08:44:33 La-Habana last message repeated 6 times
Jun 16 08:44:34 La-Habana kernel: ulpt_write_callback: state=0x0 actlen=0
Jun 16 08:44:34 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status
Jun 16 08:44:47 La-Habana last message repeated 13 times
Jun 16 08:44:48 La-Habana kernel: ulpt0: at uhub1, port 1, addr 2 (disconnected)
Jun 16 08:44:48 La-Habana kernel: ulpt_detach: sc=0xc596c580
Jun 16 08:44:48 La-Habana kernel: ulpt_write_callback: state=0x2 actlen=0
Jun 16 08:44:49 La-Habana kernel: ulpt_probe: 
Jun 16 08:44:49 La-Habana kernel: ulpt_probe: 
Jun 16 08:44:49 La-Habana kernel: ulpt_attach: sc=0xc5839880
Jun 16 08:44:49 La-Habana kernel: ulpt0: <Prlific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.00, addr 2> on usbus1
Jun 16 08:44:49 La-Habana kernel: ulpt_attach: setting alternate config number: 1
Jun 16 08:44:49 La-Habana kernel: ulpt0: using bi-directional mode
Jun 16 08:44:49 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status
Jun 16 08:44:53 La-Habana last message repeated 4 times
Jun 16 08:44:54 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status

	matthias
-- 
Matthias Apitz               |  /"\   ASCII Ribbon Campaign:
E-mail: guru@unixarea.de     |  \ /   - No HTML/RTF in E-mail
WWW: http://www.unixarea.de/ |   X    - No proprietary attachments
phone: +49-170-4527211       |  / \   - Respect for open standards
                             | en.wikipedia.org/wiki/ASCII_Ribbon_Campaign



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140616065050.GA1552>