Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 19 Nov 2014 15:14:54 +0000
From:      Waitman Gobble <waitman@waitman.net>
To:        Felix Palmen <felix@palmen-it.de>
Cc:        freebsd-x11@freebsd.org
Subject:   Re: DRI not working, AMD E 300 with Radeon HD 6310
Message-ID:  <20141119071451.6613dc13f59c491f7b9887a5@waitman.net>
In-Reply-To: <546CAD30.3060600@palmen-it.de>
References:  <546CAD30.3060600@palmen-it.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 19 Nov 2014 15:46:08 +0100
Felix Palmen <felix@palmen-it.de> wrote:

> Hello all,
> 
> I'm just trying out whether FreeBSD could replace my Linux installation 
> on my notebook, so not entirely sure whether this is the right place to 
> ask -- if not, sorry for that and please give directions to the right 
> place, thank you.
> 
> Most things work just fine, but DRI does not work:
> 
> [    49.676] (II) AIGLX: Screen 0 is not DRI2 capable
> [    49.676] (II) AIGLX: Screen 0 is not DRI capable
> [    51.511] (II) AIGLX: Loaded and initialized swrast
> [    51.511] (II) GLX: Initialized DRISWRAST GL provider for screen 0
> 
> So I checked the kernel output and found the following:
> 
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>          The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.0-CURRENT #0 r274426: Wed Nov 12 22:49:15 CET 2014
>      root@photon.home.palmen-it.de:/usr/obj/usr/src/sys/NODEBUG amd64
> FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
> VT: running with driver "efifb".
> 
> [...]
> 
> vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 
> 0xe0000000-0xefffffff,0xf0300000-0xf033ffff irq 18 at device 1.0 on pci0
> drmn0: <Wrestler [Radeon HD 6310]> on vgapci0
> info: [drm] MSI enabled 1 message(s)
> info: [drm] RADEON_IS_PCIE
> info: [drm] initializing kernel modesetting (PALM 0x1002:0x9802 
> 0x17AA:0x21EC).
> info: [drm] register mmio base: 0xF0300000
> info: [drm] register mmio size: 262144
> info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
> info: [drm] radeon_atrm_get_bios: IGP card detected, skipping this method...
> info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
> info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
> info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
> info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
> info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
> info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800e0000000 
> (262144 bytes)
> info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
> info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
> info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
> info: [drm] ATOM BIOS: Lenovo
> drmn0: info: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
> drmn0: info: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
> info: [drm] Detected VRAM RAM=384M, BAR=256M
> info: [drm] RAM width 32bits DDR
> [TTM] Zone  kernel: Available graphics memory: 1872740 kiB
> [TTM] Initializing pool allocator
> info: [drm] radeon: 384M of VRAM memory ready
> info: [drm] radeon: 512M of GTT memory ready.
> info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> info: [drm] Driver supports precise vblank timestamp query.
> info: [drm] radeon: irq initialized.
> info: [drm] GART: num cpu pages 131072, num gpu pages 131072
> info: [drm] Loading PALM Microcode
> info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
> drmn0: info: WB enabled
> drmn0: info: fence driver on ring 0 use gpu addr 0x0000000018000c00 and 
> cpu addr 0x0xfffff8011efc9c00
> drmn0: info: fence driver on ring 3 use gpu addr 0x0000000018000c0c and 
> cpu addr 0x0xfffff8011efc9c0c
> info: [drm] ring test on 0 succeeded in 1 usecs
> error: [drm:pid0:r600_dma_ring_test] *ERROR* radeon: ring 3 test failed 
> (0xCAFEDEAD)
> 
> ** ^ This seems to be the source of the problem....
> 
> drmn0: error: disabling GPU acceleration
> drmn0: warning: 0xfffff80002af6000 unpin not necessary
> info: [drm] radeon_device_init: Taking over the fictitious range 
> 0xe0000000-0xf0000000
> 
> [...]
> 
> info: [drm] Radeon Display Connectors
> info: [drm] Connector 0:
> info: [drm]   LVDS-1
> info: [drm]   HPD1
> info: [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
> info: [drm]   Encoders:
> info: [drm]     LCD1: INTERNAL_UNIPHY
> info: [drm] Connector 1:
> info: [drm]   HDMI-A-1
> info: [drm]   HPD2
> info: [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
> info: [drm]   Encoders:
> info: [drm]     DFP1: INTERNAL_UNIPHY
> info: [drm] Connector 2:
> info: [drm]   VGA-1
> info: [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
> info: [drm]   Encoders:
> info: [drm]     CRT1: INTERNAL_KLDSCP_DAC1
> drmn0: warning: Can't enable IRQ/MSI because no handler is installed
> info: [drm] Internal thermal controller without fan control
> info: [drm] radeon: power management initialized
> info: [drm] Connector LVDS-1: get mode from tunables:
> info: [drm]   - kern.vt.fb.modes.LVDS-1
> info: [drm]   - kern.vt.fb.default_mode
> info: [drm] Connector HDMI-A-1: get mode from tunables:
> info: [drm]   - kern.vt.fb.modes.HDMI-A-1
> info: [drm]   - kern.vt.fb.default_mode
> info: [drm] Connector VGA-1: get mode from tunables:
> info: [drm]   - kern.vt.fb.modes.VGA-1
> info: [drm]   - kern.vt.fb.default_mode
> info: [drm] fb mappable at 0xE0142000
> info: [drm] vram apper at 0xE0000000
> info: [drm] size 4325376
> info: [drm] fb depth is 24
> info: [drm]    pitch is 5632
> fbd0 on drmn0
> VT: Replacing driver "efifb" with new "fb".
> info: [drm] Initialized radeon 2.29.0 20080528
> vgapci0: Boot video device
> 
> As https://wiki.freebsd.org/Graphics lists my chip with "Works", what 
> could I have missed here? Could it be anything in 11-current breaking 
> this, so trying 10.1 could help?
> 
> Thanks for help/ideas/hints ...
> 
> Best regards,
> Felix
> 
> -- 
>   Dipl.-Inform. Felix Palmen  <felix@palmen-it.de>   ,.//..........
>   {web}  http://palmen-it.de  {jabber} [see email]   ,//palmen-it.de
>   {pgp public key}     http://palmen-it.de/pub.txt   //   """""""""""
>   {pgp fingerprint} ED9B 62D0 BE39 32F9 2488 5D0C 8177 9D80 5ECF F683
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"

An article on wikipedia 'claims' the Radeon HD 6310 'Zacate' using Evergreen chipset, however the wiki page on FreeBSD graphics shows Northern Islands / Palm... see in your posted log that PALM firmware is being loaded.

http://en.wikipedia.org/wiki/AMD_Accelerated_Processing_Unit#Bobcat_architecture_.282011.29:_Ontario.2C_Zacate.2C_Desna.2C_Hondo

(6310 does not appear on http://en.wikipedia.org/wiki/Radeon_HD_6000_Series)

It appears to me this product was released in 2011 'in-between-stage' Evergreen/Northern Islands.

Maybe that's the issue? Can you try booting a Linux kernel (maybe mainline) from USB or something to see what firmware is loaded? 

also.. It would be nice to import a newer kernel version.. 3.8 (if my recollection is correct) is getting dated. +I'd still love to have BONAIR support. :)



-- 
Waitman Gobble <waitman@waitman.net>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20141119071451.6613dc13f59c491f7b9887a5>