Date: Sat, 19 May 2018 10:10:30 +0200 From: Roger Pau =?utf-8?B?TW9ubsOp?= <roger.pau@citrix.com> To: Pratyush Yadav <pratiy0100@gmail.com> Cc: FreeBSD-Xen <freebsd-xen@freebsd.org>, Akshay Jaggi <jaggi@freebsd.org>, Edward Napierala <trasz@freebsd.org> Subject: Re: Xen kernel fails to boot, d0v1 triple fault looks like the cuplrit Message-ID: <20180519081030.qhzyjdrpwcekmcac@MacBook-Pro-de-Roger.local> In-Reply-To: <CA%2BX=3T%2BYiUmNNPSSA36QmwYsamgAf0hHEsEock-FcomCHc-Jww@mail.gmail.com> References: <CA%2BX=3T%2BYiUmNNPSSA36QmwYsamgAf0hHEsEock-FcomCHc-Jww@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, May 18, 2018 at 05:29:06PM +0530, Pratyush Yadav wrote: > Hi, > > So I have been trying to get Xen to boot on my laptop. It is getting > stuck with the following error messages: > > (XEN) Scrubbing free RAM on 1 nodes using 4 CPUs > (XEN) [VT-D] DMAR: [DMA Read} Request device [0000:00:1a.0] fault addr > 9ce13000. iommu reg - ffff82c000203000 > (XEN) [VT-D] DMAR: reason 06 - PTE read access is not set > (XEN) ........... done > (XEN) initial low memory virq threshold set at 0x200 pages. > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) Xen is keeping VGA console > (XEN) Boot video device 00:02.0 > (XEN) ***Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) > (XEN) Freed 320 kB init memory > FreeBSD PVH running on xen-3.0-x86_64p > Copyright (c) 1992-2018 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 The regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 12.0-CURRENT #0 r333606: Mon May 14 19:59:08 UTC 2018 > root@releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 > WARNING: WITNESS option enabled, expect reduced performance. > VT(vga): text 80x25 > CPU: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (2494.22-MHz K8-class CPU) > Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 > Features=0x17c1cbf5<FPU,DE,TSC,MSR,PAE,MCE.CX8.APIC,SEP,MCA,CMOV,PAT,ACPI,MMX > FXSR,SSE,SSE2,HTT> > Features2=0xf6f83203<SSE3,PCLMULQDQ,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE > POPCNT,AESNI,XSAVE,AVX,F16C,RDRAND,HV> > AMD Features=0x20101800<SYSCALL,<s12>NX,LM> > AMD Features2=0x21<<LAHF,ABM> > Structured Extended Features=0x2329<FSGSBASE,BMI1,AVX2,BMI2,ERMS,NFPUSG> > Hypervisor: Origin = "XenVMMXenVMM" > real memory = 9991770112 (9528 MB) > avail memory = 7936724992 (7569 MB) > (XEN) d0v1 Triple fault - invoking HVM shutdown action 0 > (XEN) *** Dumping Dom0 vcpu#1 state: *** > (XEN) ----[ Xen-4.7.2 x86_64 debug=n Not tainted ]---- > (XEN) CPU: 1 > (XEN) RIP: 0020:[<ffffffff8102042b>] > (XEN) RFLAGS: 0000000000010016 CONTEXT: hvm guest (d0v1) > (XEN) rax: 0000000000000000 rbx: ffffffff8201c100 rcx: 0000000000000001 > (XEN) rdx: 0000000000003078 rsi: ffffffff81b992f8 rdi: fffffe0003bb6078 > (XEN) rbp: fffffe00009ffff0 rsp: fffffe00009fffa0 r8: 00000000ffffffff > (XEN) r15: 0000000000000400 cr0: 0000000000000011 cr4: 0000000000000020 > (XEN) cr3: 00000000035a4000 cr2: 0000000000000ff0 > (XEN) ds: 0028 es: 0028 fs: 0028 gs: 0028 ss: 0028 cs: 0020 > (XEN) Guest stack trace from rsp=fffffe00009fffa0: > (XEN) Fault while accessing guest memory. > (XEN) Hardware Dom0 halted: halting machine > > Any idea why this is happening and how can I fix this? Can you execute: addr2line -e /usr/lib/debug/boot/kernel/kernel.debug ffffffff8102042b This should print a file and line number that would help in order to debug what's going on. Since it seems like the crash is caused by a triple fault on an AP, you can try to boot with dom0_max_vcpus=1 on the xen_cmdline, that might prevent the panic from happening. We need however to figure out what's going on and fix it. Thanks, Roger.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180519081030.qhzyjdrpwcekmcac>