Date: Thu, 27 Sep 2018 19:59:17 +0200 From: Petr Fischer <petr.fischer@me.com> To: freebsd-acpi@freebsd.org Subject: suspend to RAM stopped working on 11.2 (11.1 was OK) Message-ID: <20180927175917.7iea6w4ckyngrpto@pf-bsd>
next in thread | raw e-mail | index | archive | help
Hello, suspend to RAM stopped working on my laptop on 11.2 (11.1 was OK) freebsd: 11.2-RELEASE-p3 hardware: Toshiba Portege Z30 - Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz tried with i915kms from FreeBSD base (default) and also with drm-next-kmod-4.11.g20180822 (drm-stable-kmod-g20180822 freezes graphics 1 second after load) tried with hw.acpi.reset_video=0 and also with hw.acpi.reset_video=1 Is there someone who can help me with debug this problem? I can compile something and test when you say. Thanks very much! Petr Fischer /var/log/messages after acpiconf -s 3 command: --------------------- Sep 27 19:49:40 pf-bsd acpi: suspend at 20180927 19:49:40 Sep 27 19:49:54 pf-bsd kernel: Power well on Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested pci_set_powerstate Sep 27 19:49:54 pf-bsd kernel: pci0: failed to set ACPI power state D3 on \_SB_.PCI0.GFX0: AE_BAD_PARAMETER Sep 27 19:49:54 pf-bsd kernel: hdac0: Command timeout on address 0 Sep 27 19:49:54 pf-bsd kernel: uhub0: at usbus0, port 1, addr 1 (disconnected) Sep 27 19:49:54 pf-bsd kernel: ugen0.2: <vendor 0x0458 product 0x0154> at usbus0 (disconnected) Sep 27 19:49:54 pf-bsd kernel: ums0: at uhub0, port 5, addr 1 (disconnected) Sep 27 19:49:54 pf-bsd kernel: ums0: detached Sep 27 19:49:54 pf-bsd kernel: uhid0: at uhub0, port 5, addr 1 (disconnected) Sep 27 19:49:54 pf-bsd kernel: uhid0: detached Sep 27 19:49:54 pf-bsd kernel: ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 (disconnected) Sep 27 19:49:54 pf-bsd kernel: uhub3: at uhub0, port 6, addr 2 (disconnected) Sep 27 19:49:54 pf-bsd kernel: ugen0.4: <vendor 0x0b97 product 0x7761> at usbus0 (disconnected) Sep 27 19:49:54 pf-bsd kernel: uhub4: at uhub3, port 3, addr 3 (disconnected) Sep 27 19:49:54 pf-bsd kernel: ugen0.5: <O2 O2Micro CCID SC Reader> at usbus0 (disconnected) Sep 27 19:49:54 pf-bsd kernel: uhub4: detached Sep 27 19:49:54 pf-bsd kernel: uhub3: detached Sep 27 19:49:54 pf-bsd kernel: wlan0: link state changed to DOWN Sep 27 19:49:54 pf-bsd kernel: uhub1: at usbus1, port 1, addr 1 (disconnected) Sep 27 19:49:54 pf-bsd kernel: ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 (disconnected) Sep 27 19:49:54 pf-bsd kernel: uhub2: at uhub1, port 1, addr 2 (disconnected) Sep 27 19:49:54 pf-bsd kernel: uhub2: detached Sep 27 19:49:54 pf-bsd kernel: pcib0: failed to set ACPI power state D2 on \_SB_.PCI0: AE_BAD_PARAMETER Sep 27 19:49:54 pf-bsd kernel: acpi0: cleared fixed power button status Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested pci_set_powerstate Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested pci_enable_io Sep 27 19:49:54 pf-bsd kernel: vgapci0: child drmn0 requested pci_enable_io Sep 27 19:49:54 pf-bsd kernel: hdac0: Device stuck in reset Sep 27 19:49:54 pf-bsd kernel: hdac0: Command timeout on address 0 Sep 27 19:49:54 pf-bsd last message repeated 21 times Sep 27 19:49:54 pf-bsd kernel: xhci0: Port routing mask set to 0xffffffff Sep 27 19:49:54 pf-bsd kernel: uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Sep 27 19:49:54 pf-bsd kernel: uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Sep 27 19:49:54 pf-bsd wpa_supplicant[58136]: wlan0: CTRL-EVENT-DISCONNECTED bssid=f0:79:59:d2:7a:00 reason=0 Sep 27 19:49:54 pf-bsd wpa_supplicant[58136]: ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Can't assign requested address Sep 27 19:49:54 pf-bsd acpi: resumed at 20180927 19:49:54 Sep 27 19:49:55 pf-bsd kernel: uhub0: 13 ports with 13 removable, self powered Sep 27 19:49:55 pf-bsd kernel: uhub1: 2 ports with 2 removable, self powered Sep 27 19:49:56 pf-bsd kernel: ugen0.2: <vendor 0x0458 product 0x0154> at usbus0 Sep 27 19:49:56 pf-bsd kernel: ums0 on uhub0 Sep 27 19:49:56 pf-bsd kernel: ums0: <vendor 0x0458 product 0x0154, class 0/0, rev 1.10/33.52, addr 1> on usbus0 Sep 27 19:49:56 pf-bsd kernel: ums0: 5 buttons and [XYZT] coordinates ID=1 Sep 27 19:49:56 pf-bsd kernel: uhid0 on uhub0 Sep 27 19:49:56 pf-bsd kernel: uhid0: <vendor 0x0458 product 0x0154, class 0/0, rev 1.10/33.52, addr 1> on usbus0 Sep 27 19:49:56 pf-bsd kernel: ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 Sep 27 19:49:56 pf-bsd kernel: uhub2 on uhub1 Sep 27 19:49:56 pf-bsd kernel: uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 Sep 27 19:49:56 pf-bsd kernel: ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 Sep 27 19:49:56 pf-bsd kernel: uhub3 on uhub0 Sep 27 19:49:56 pf-bsd kernel: uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.37, addr 2> on usbus0 Sep 27 19:49:56 pf-bsd kernel: uhub2: 8 ports with 8 removable, self powered Sep 27 19:49:57 pf-bsd kernel: uhub3: 3 ports with 0 removable, self powered Sep 27 19:49:57 pf-bsd kernel: ugen0.4: <vendor 0x0b97 product 0x7761> at usbus0 Sep 27 19:49:58 pf-bsd kernel: uhub4 on uhub3 Sep 27 19:49:58 pf-bsd kernel: uhub4: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 3> on usbus0 Sep 27 19:49:58 pf-bsd kernel: uhub4: 4 ports with 3 removable, self powered Sep 27 19:49:59 pf-bsd kernel: ugen0.5: <O2 O2Micro CCID SC Reader> at usbus0 Sep 27 19:49:59 pf-bsd root: Unknown USB device: vendor 0x0b97 product 0x7772 bus uhub4 Sep 27 19:50:02 pf-bsd wpa_supplicant[58136]: wlan0: Trying to associate with f0:79:59:d2:7a:00 (SSID='pf's Network' freq=2427 MHz) Sep 27 19:50:02 pf-bsd wpa_supplicant[58136]: wlan0: Associated with f0:79:59:d2:7a:00 Sep 27 19:50:02 pf-bsd kernel: wlan0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180927175917.7iea6w4ckyngrpto>