Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 17 Jan 1998 11:02:37 +0800 (SGT)
From:      chas <panda@peace.com.my>
To:        freebsd-questions@FreeBSD.ORG
Subject:   NIC woes : server visible on our network only.
Message-ID:  <3.0.32.19980117110938.009379b0@peace.com.my>

next in thread | raw e-mail | index | archive | help
We have been having woes

- When our machine boots/restarts, the messages appear on the screen 
  and all seems to be going well in the boot process until
  it gets to the NIC config.
  ep0 : .<blah>..... ether
  Once this appears on the screen, the process seems to halt.
  I then have to press CTRL + C to get it to finish booting.
  (the next line says something about clearing /tmp)

- I have since learned that this is not a very cool thing to do.
  For the past few days, it appears that all incoming mail on this
  mailserver was not arriving. Anyone outside our network could
  not even ping the machine, even by IP number. Yet internally we could
  use the mail server without problem for sending / receiving.
  We could also ping it fine. Basically the machine was invisible
  to anyone not on our network.
  
So, now, when the bootup stalls, I ping the machine or 
try to check my mail from another machine. Whilst both of these
will fail, it does seem to persuade the mailserver to complete
the boot process.

Has anyone any explanation for the above ? (we are using 
3com etherlink III NICs)

Cheers,

chas





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.19980117110938.009379b0>