Date: Thu, 22 Jun 2006 13:55:54 -0600 From: "Andrew Falanga" <af300wsm@gmail.com> To: "Derek Ragona" <derek@computinginnovations.com>, freebsd-questions@freebsd.org Subject: Re: Serial programming on FreeBSD 6.0 RELEASE Message-ID: <340a29540606221255xd82aa33qf0dc96b95cb0cb12@mail.gmail.com> In-Reply-To: <6.0.0.22.2.20060622141710.0203b870@mail.computinginnovations.com> References: <340a29540606220828i500905afq6d1ff81cf095cf88@mail.gmail.com> <6.0.0.22.2.20060622115945.02533de8@mail.computinginnovations.com> <340a29540606221119o16cab29ak5ae46156a3feca09@mail.gmail.com> <6.0.0.22.2.20060622132439.0253b160@mail.computinginnovations.com> <340a29540606221139w7b257b26j5c115c3976bd2927@mail.gmail.com> <6.0.0.22.2.20060622134310.02533080@mail.computinginnovations.com> <340a29540606221157s71e3fb15n4187b4329722fbab@mail.gmail.com> <6.0.0.22.2.20060622141710.0203b870@mail.computinginnovations.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm not sure I understand what you mean. Andy On 6/22/06, Derek Ragona <derek@computinginnovations.com> wrote: > > Kermit may be manipulating the uart directly. > > Unless you are not getting the uart to flush the characters. I have only > had that problem with doing low-level direct programing. Typically not a > problem with high-level coding where you just open the device and set it for > non-buffered output. > > Your problem though may be in the stack overflows. You may need to > explicitly compile and link it with a larger stack. It may be these > overflows causing the output to never get there. > > -Derek > > > > At 01:57 PM 6/22/2006, Andrew Falanga wrote: > > Unfortunately, it looks like getty isn't running on /dev/cuad1. I did the > ps command you suggest below and it apears that getty is only running on the > virtual terminals (ttyvx). > > Would you have any idea what it is that kermit is doing differently that > I? > > Andy > > On 6/22/06, *Derek Ragona* <derek@computinginnovations.com> wrote: > > I would do a > ps -ax|more > to see what is running. > > Depending on your version FreeBSD may not have enabled the getty in > /etc/ttys > > -Derek > > > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean. > MailScanner thanks transtec Computers <http://www.transtec.co.uk/> for > their support. > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean. > MailScanner thanks transtec Computers <http://www.transtec.co.uk/> for > their support. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?340a29540606221255xd82aa33qf0dc96b95cb0cb12>