Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 21 Mar 1998 08:54:02 -0800
From:      Scott Long <slafla@home.com>
To:        freebsd-current@FreeBSD.ORG
Subject:   current breakage
Message-ID:  <3513F0AA.E817DA74@home.com>

next in thread | raw e-mail | index | archive | help
Hi.  I just cvsuped current at 0730pst and tried to make world.  It
fails
here:

building standard ln library
ranlib libln.a
install -c -o bin -g bin -m 444   libln.a /usr/obj/usr/src/tmp/usr/lib
/usr/obj/usr/src/tmp/usr/lib/libl.a ->
/usr/obj/usr/src/tmp/usr/lib/libln.a
/usr/obj/usr/src/tmp/usr/lib/libfl.a ->
/usr/obj/usr/src/tmp/usr/lib/libln.a
/usr/obj/usr/src/usr.bin/lex/lib created for /usr/src/usr.bin/lex/lib
cd /usr/src/usr.bin/mk_cmds && /usr/obj/usr/src/tmp/usr/bin/make
-DNOINFO -DNOMA
N -DNOPROFILE -DNOSHARED depend &&  /usr/obj/usr/src/tmp/usr/bin/make
-DNOINFO -
DNOMAN -DNOPROFILE -DNOSHARED all &&  /usr/obj/usr/src/tmp/usr/bin/make
-DNOINFO
 -DNOMAN -DNOPROFILE -DNOSHARED -B install && 
/usr/obj/usr/src/tmp/usr/bin/make
 -DNOINFO -DNOMAN -DNOPROFILE -DNOSHARED -B cleandir obj
yacc -d /usr/src/usr.bin/mk_cmds/ct.y
mv y.tab.c ct.c
lex -t -l /usr/src/usr.bin/mk_cmds/cmd_tbl.l > cmd_tbl.c
Bus error - core dumped
*** Error code 138

Stop.

A subsequent try at make world results in a panic during the "rm -rf
/usr/obj/usr/src/tmp" at the beginning.  Is the tree in a rather
unstable state right now?
My dmesg output is:

Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
FreeBSD 3.0-CURRENT #2: Thu Mar 19 20:25:03 PST 1998
    scottl@cx67628-a.dt1.sdca.home.com:/usr/src/sys/compile/SLAFLA
Timecounter "i8254"  frequency 1193210 Hz  cost 2687 ns
Timecounter "TSC"  frequency 200458990 Hz  cost 176 ns
CPU: Pentium (200.46-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping=3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 50331648 (49152K bytes)
avail memory = 47079424 (45976K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB USB host controller> rev 0x01 int d irq 11 on
pci0.7.2
chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
vga0: <S3 968 graphics accelerator> rev 0x00 int a irq 10 on pci0.18.0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 9 on
pci0.19.0
ed0: address 00:40:05:5e:b0:a7, type NE2000 (16 bit)
Probing for PnP devices:
CSN 1 Vendor ID: USR2050 [0x50207256] Serial 0x46464646
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 85250D6>, DMA, 32-bit, multi-block-16
wd0: 5009MB (10258920 sectors), 10856 cyls, 15 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <MATSHITA CR-583/107J>, removable, accel, dma,
iordis
wcd0: 1378Kb/sec, 128Kb cache, audio play, 256 volume levels, ejectable
tray
wcd0: no disc inside, unlocked
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <Conner Peripherals 1080MB - CFS1081A>, DMA, 32-bit,
multi-b
lock-16
wd2: 1032MB (2113776 sectors), 2097 cyls, 16 heads, 63 S/T, 512 B/S
wdc1: unit 1 (wd3): <WDC AC2420H>, 32-bit, multi-block-16
wd3: 405MB (830760 sectors), 989 cyls, 15 heads, 56 S/T, 512 B/S
npx0 on motherboard
npx0: INT 16 interface
sb0 at 0x220 irq 5 drq 1 on isasbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM>
Intel Pentium F00F detected, installing workaround
WARNING: / was not properly dismounted.
pid 19187 (lex), uid 0: exited on signal 10 (core dumped)

Hope this helps

Scott

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3513F0AA.E817DA74>