Date: Thu, 20 May 1999 16:35:40 +0200 From: Marcel Moolenaar <marcel@scc.nl> To: isdn@FreeBSD.ORG Subject: beta 00.81.0/4.0-current: i4b-L1-ph_data_req: still in state F3! Message-ID: <37441DBC.A5B3FA34@scc.nl>
next in thread | raw e-mail | index | archive | help
Hi, I have some problems with my configuration and the new beta. Here are the first lines of kernel log: i4b-L1-timer3_expired: state = F4 Awaiting Signal i4b-L1-isic_recover: HSCX B: ISTA = 0x0 i4b-L1-isic_recover: ISAC: ISTA = 0x95 i4b-L1-isic_recover: ISAC: EXIR = 0x10 i4b-L1-isic_recover: ISAC: CISQ = 0x12 i4b-L1-isic_recover: HSCX B: IMASK = 0xff i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 i4b-L1-isic_recover: ISAC: IMASK = 0x2a i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 i4b-L1-ph_data_req: still in state F3! i4b-L3-T303_timeout: SETUP not answered, cr = 43 i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, event = EV _T303EXP - T303 timeout! i4b-L1-timer3_expired: state = F4 Awaiting Signal i4b-L1-isic_recover: HSCX B: ISTA = 0x0 i4b-L1-isic_recover: ISAC: ISTA = 0x4 i4b-L1-isic_recover: ISAC: CISQ = 0x32 i4b-L1-isic_recover: HSCX B: IMASK = 0xff i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 i4b-L1-isic_recover: ISAC: IMASK = 0x2a Which is eventually followed by: i4b-L2-i4b_mph_status_ind: unit 0, cannot access S0 bus! i4b-L3-i4b_mdl_status_ind: STI_NOL1ACC: unit 0 no outgoing access to S0 Here are some configuration details: (*) FreeBSD scones.sup.scc.nl 4.0-CURRENT FreeBSD 4.0-CURRENT #1: Thu May 20 15:37:09 CEST 1999 marcel@scones.sup.scc.nl:/usr/src/sys/compile/SCONES i386 (*) Teles SO/16.3: isic0 at port 0xd80 irq 3 flags 0x3 on isa0 isic0: Teles S0/16.3 isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0x960) isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x160, AddrB=0x560) i4b: ISDN call control device attached i4bisppp: 4 ISDN SyncPPP device(s) attached i4bctl: ISDN system control port attached i4btel: 2 ISDN telephony interface device(s) attached i4btrc: 4 ISDN trace device(s) attached (*) SMP kernel with the following configuration: options SMP options APIC_IO device isic0 at isa? port 0xd80 irq 3 flags 3 options I4B_SMP_WORKAROUND options TEL_S0_16_3 options IPR_VJ pseudo-device "i4bq921" pseudo-device "i4bq931" pseudo-device "i4b" pseudo-device "i4bctl" pseudo-device "i4btrc" 4 pseudo-device "i4btel" 2 pseudo-device "i4bisppp" 4 pseudo-device sppp 4 (*) S0 bus (MSN): - Shiva AccessPort answers primary number (phone) - i4b answers second number (data) Other info: - Beta 00.73.0 worked when the Teles was set to irq 9. This generated lots of lines like: i4b-L1-isicintr: WARNING: unit 0, No IRQ from HSCX/ISAC! - Beta 00.81.0 also doesn't work for irq 9 I'll try to fiddle with my config some more and hope to narrow it down. Hang on :-) -- Marcel Moolenaar mailto:marcel@scc.nl SCC Internetworking & Databases http://www.scc.nl/ Amsterdam, The Netherlands tel: +31 20 4200655 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37441DBC.A5B3FA34>