Date: Fri, 13 Jul 2001 22:23:09 -0400 From: Bill Moran <wmoran@iowna.com> To: freebsd-questions@freebsd.org Subject: Problems with PPTP using mpd Message-ID: <3B4FAD0D.CC5BF37B@iowna.com>
next in thread | raw e-mail | index | archive | help
Using FreeBSD 4.3 and mpd 3.2 I'm trying to set up a PPTP connection to an NT 4 workstation. The FreeBSD box is calling to the NT WS. Things seem to go fairly well except it can't authenticate. Here is a script capture of what happens: Script started on Fri Jul 13 22:19:13 2001 Multi-link PPP for FreeBSD, by Archie L. Cobbs. Based on iij-ppp, by Toshiharu OHNO. mpd: pid 7306, version 3.2 (root@gohan14.freebsd.org 18:57 19-Apr-2001) [pptp1] ppp node is "mpd7306-pptp1" [pptp1] using interface ng0 [pptp1:pptp1] open [pptp1] IFACE: Open event [pptp1] IPCP: Open event [pptp1] IPCP: state change Initial --> Starting [pptp1] IPCP: LayerStart [pptp1:pptp1] [pptp1] bundle: OPEN event in state CLOSED [pptp1] opening link "pptp1"... [pptp1] link: OPEN event [pptp1] LCP: Open event [pptp1] LCP: state change Initial --> Starting [pptp1] LCP: LayerStart [pptp1] device: OPEN event in state DOWN pptp0: connecting to 10.0.0.50:1723 [pptp1] device is now in state OPENING pptp0: connected to 10.0.0.50:1723 pptp0: attached to connection with 10.0.0.50:1723 pptp0-0: outgoing call connected at 64000 bps [pptp1] PPTP call successful [pptp1] device: UP event in state OPENING [pptp1] device is now in state UP [pptp1] link: UP event [pptp1] link: origination is local [pptp1] LCP: Up event [pptp1] LCP: state change Starting --> Req-Sent [pptp1] LCP: phase shift DEAD --> ESTABLISH [pptp1] LCP: SendConfigReq #1 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: rec'd Configure Request #0 link 0 (Req-Sent) AUTHPROTO CHAP MSOFT MAGICNUM 00005010 PROTOCOMP ACFCOMP [pptp1] LCP: SendConfigAck #0 AUTHPROTO CHAP MSOFT MAGICNUM 00005010 PROTOCOMP ACFCOMP [pptp1] LCP: state change Req-Sent --> Ack-Sent [pptp1] LCP: rec'd Configure Reject #1 link 0 (Ack-Sent) AUTHPROTO CHAP MSOFT [pptp1] LCP: SendConfigReq #2 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: SendConfigReq #3 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: rec'd Configure Reject #3 link 0 (Ack-Sent) AUTHPROTO CHAP MSOFT [pptp1] LCP: SendConfigReq #4 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: rec'd Configure Reject #4 link 0 (Ack-Sent) AUTHPROTO CHAP MSOFT [pptp1] LCP: SendConfigReq #5 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: rec'd Configure Reject #5 link 0 (Ack-Sent) AUTHPROTO CHAP MSOFT [pptp1] LCP: SendConfigReq #6 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: rec'd Configure Reject #6 link 0 (Ack-Sent) AUTHPROTO CHAP MSOFT [pptp1] LCP: SendConfigReq #7 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: rec'd Terminate Request #1 link 0 (Ack-Sent) [pptp1] LCP: state change Ack-Sent --> Req-Sent [pptp1] LCP: SendTerminateAck #8 [pptp1] LCP: rec'd Terminate Request #2 link 0 (Req-Sent) [pptp1] LCP: SendTerminateAck #9 [pptp1] LCP: SendConfigReq #10 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT [pptp1] LCP: SendConfigReq #11 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM 27325afc AUTHPROTO CHAP MSOFT pptp0-0: peer call disconnected res=admin action err=none pptp0-0: killing channel [pptp1] PPTP call terminated pptp0: closing connection with 10.0.0.50:1723 [pptp1] device: DOWN event in state UP [pptp1] device is now in state DOWN Any thoughts? My mpd.links: pptp1: set link type pptp set pptp enable originate set pptp disable incoming set pptp self 10.0.0.99 set pptp peer 10.0.0.50 My mpd.conf default: load pptp1 pptp1: new -i ng0 pptp1 pptp1 set iface idle 0 set iface route 192.168.0.0/16 set iface addrs 192.168.0.1 192.168.0.2 set bundle disable multilink set bundle authname "testusr" set bundle password "test" set link no pap set link yes chap set link keep-alive 10 75 set ipcp yes vjcomp set ipcp ranges 192.168.0.1/32 192.168.0.2/32 # set ccp yes mppc # set ccp yes mpp-e40 # set ccp yes mpp-e128 # set bundle enable crypt-reqd # set ccp yes mpp-stateless To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B4FAD0D.CC5BF37B>