Date: Tue, 21 Oct 2003 15:28:55 +0200 From: Arjan Knepper <arjan@jak.nl> To: freebsd-stable@freebsd.org Subject: IDE ATA ATAPI tape drive (AST0) causes system to stop responding. Message-ID: <3F953497.3060602@jak.nl>
next in thread | raw e-mail | index | archive | help
Hello, Recently I installed a Dell PowerEdge 600 SC with FreeBSD 4.8-RELEASE-p13 for a client. This system has a Seagate STT20000A IDE tape drive which causes the system to stop responding when using the tape drive for backups. A hard powercycle is needed to get the system running again. Today the last command issued is: mt fsf 1 The last two lines on the console are: AST0: rezero command timeout resetting ATA2: resetting devices .. But it also happend while writing or reading to or from the backup tape I have googled around and tried various suggestions but with no succes. I also tried FreeBSD-STABLE but problem persists. Does anyone have a clue what might be wrong? Thanks Arjan dmesg output: > atapci0: <Generic PCI ATA controller> port > 0x900-0x90f,0x36c-0x36f,0x168-0x16f,0x3ec-0x3ef,0x1e8-0x1ef irq 11 at > device 14.0 > on pci0 > ata2: at 0x1e8 on atapci0 > ata3: at 0x168 on atapci0 > atapci1: <Generic PCI ATA controller> port > 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device > 15.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci1 > ata1: at 0x170 irq 15 on atapci1 > acd0: DVD-ROM <LITEON DVD-ROM LTD163> at ata2-master PIO4 > ast0: TAPE <Seagate STT20000A> at ata2-slave PIO4 sysctl for ata > hw.ata.ata_dma: 1 > hw.ata.wc: 0 > hw.ata.tags: 0 > hw.ata.atapi_dma: 1 kernel config > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F953497.3060602>