Date: Tue, 21 Oct 2003 22:36:54 +0900 From: "N. Fung" <fbsdml@typhoon.co.jp> To: freebsd-stable@freebsd.org Subject: Re: IDE ATA ATAPI tape drive (AST0) causes system to stop responding. Message-ID: <3F953676.9090205@typhoon.co.jp> In-Reply-To: <3F953497.3060602@jak.nl> References: <3F953497.3060602@jak.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Arjan Knepper wrote: > Hello, > > Recently I installed a Dell PowerEdge 600 SC with FreeBSD > 4.8-RELEASE-p13 for a client. This system has a Seagate STT20000A IDE > tape drive which causes the system to stop responding when using the > tape drive for backups. A hard powercycle is needed to get the system > running again. I had backup and gunzip problems with ATA on my PE600SC too. First, try putting: hw.ata.ata_dma=0 into /boot/loader.conf.local first. That solved my ATA related problem on the PE600SC. N. > > Today the last command issued is: > mt fsf 1 > > The last two lines on the console are: > > AST0: rezero command timeout resetting > ATA2: resetting devices .. > > But it also happend while writing or reading to or from the backup tape > > I have googled around and tried various suggestions but with no succes. > > I also tried FreeBSD-STABLE but problem persists. > > Does anyone have a clue what might be wrong? > > Thanks > Arjan > > dmesg output: > >> atapci0: <Generic PCI ATA controller> port >> 0x900-0x90f,0x36c-0x36f,0x168-0x16f,0x3ec-0x3ef,0x1e8-0x1ef irq 11 at >> device 14.0 >> on pci0 >> ata2: at 0x1e8 on atapci0 >> ata3: at 0x168 on atapci0 >> atapci1: <Generic PCI ATA controller> port >> 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device >> 15.1 on pci0 >> ata0: at 0x1f0 irq 14 on atapci1 >> ata1: at 0x170 irq 15 on atapci1 > > >> acd0: DVD-ROM <LITEON DVD-ROM LTD163> at ata2-master PIO4 >> ast0: TAPE <Seagate STT20000A> at ata2-slave PIO4 > > > sysctl for ata > >> hw.ata.ata_dma: 1 >> hw.ata.wc: 0 >> hw.ata.tags: 0 >> hw.ata.atapi_dma: 1 > > > kernel config > >> # ATA and ATAPI devices >> device ata >> device atadisk # ATA disk drives >> device atapicd # ATAPI CDROM drives >> device atapifd # ATAPI floppy drives >> device atapist # ATAPI tape drives > > > > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F953676.9090205>