Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 23 May 2004 13:29:54 +0200
From:      Phil Schulz <ph.schulz@gmx.de>
To:        freebsd-current@freebsd.org
Subject:   Re: link up/link down on ndis0
Message-ID:  <40B08B32.9020401@gmx.de>
In-Reply-To: <40AF6F25.9000502@gmx.de>
References:  <40AF6F25.9000502@gmx.de>

next in thread | previous in thread | raw e-mail | index | archive | help

> Hello List!
>
> I'm running FreeBSD 5.2.1-RELEASE-p7 on a Centrino laptop and I'm 
> trying to get the integrated WLAN adaptor to work. I've built the 
> NDISulator (using the WinXP driver that came w/ the laptop) based on 
> information I found on the web and in the archives of this list [1], [2].
> However, I can't seem to get the ndis0 interface to work. I'm trying 
> to integrate my laptop into the home network. The network is a small, 
> wired home network with around 10 hosts and one access point which 
> sits right next to my laptop here on my desk. Below you can find the 
> steps I'm doing. I'm sort of wondering what the 'ndis0: link down' 
> message means which I see on the console. The access point is less 
> than 3ft away from the laptop so I don't think it's a signal issue. Is 
> my access point mis-configured or am I doing things wrong on the laptop?
> I'm sorry if I could have solved this myself but this is the first 
> time I'm touching a WLAN.
>
For the sake of the archives... I also gave the ipw-driver a try and I 
discovered that the laptop doesn't turn on the radio transmitter by 
itself. Instead there is a button which, as expected, does not work 
under FreeBSD. I found the source code for a Linux kernel module which 
allows the user to control the RF module. I'll see where I can go from 
there...

Phil.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40B08B32.9020401>